|
Temperature Sender - 1/8 " NPT Thread
1/8" NPT Dual Station temperature sender.
Specifications:
Dual station
1/8 inch NPT thread size
10-32 stud terminal
Works with US ohm scale temperature gauges
Standard ground
Factory P/N TS1056
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
17.99 |
|
|
Temperature Sender - 1/4" NPT Thread
1/4" NPT Single station temperature sender.
Specifications:
Single station
1/4 inch NPT thread size
10-32 stud terminal
Works with US ohm scale temperature gauges
Standard ground
Factory P/N TS2035
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
16.67 |
|
|
Temperature Sender 1/8" NPTF Cylinder Head Temp
Features:
Temperature Sender
1/8" NPTF
NPTF Cylinder Head
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
19.74 |
|
|
Temperature Sender - 1/8" (American Single Standard)
Features:
1/8” NPTF
American Single Standard
Catalog P/N 90401
∗Sold as a Single
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
12.49 |
|
|
Oil Pressure Sender 1/8 NPTF European 5 Bar Single Float
The Faria Beede single station insulated earth oil pressure sender is European resistance and suitable for use with the European range of Faria Beede oil pressure gauges.
The Faria Beede oil pressure sender is threaded 1/8" NPTF and works with both 12V and 24V DC electrical systems, for alternative threaded systems please order an appropriate threaded sender adaptor.
Single station oil pressure sender is suitable for operating one oil pressure gauge, for dual gauge operations order a dual station oil pressure sender. The Faria Beede insulated earth oil pressure sensor is earthed back to the battery (where earth means ground (G) and is negative).
This Faria Beede pressure sender measures up to 5 bar.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
52.18 |
|
|
Oil Pressure Sender 1/8 NPTF America 80 PSI Dual Station Standard
Engine oil pressure sending unit sends a reading from 0-80 PSI to the oil pressure gauge.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
45.84 |
|
|
Oil Pressure Sender (1/8 NPTF European 10 Bar) - Single Standard
Perfect replacement or upgrade to your boat.
Features:
Single Standard
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
112.07 |
|
|
Oil Pressure Sender 1/8" NPTF American 100 PSI - Single Standard
Features:
1/8" NPTF
A wide variety of sender types
Metric and Standard values available
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
40.13 |
|
|
Temp Sender 3/8" NPTF America Single Standard
Features:
3/8 NPT
100/250 oF - 460/29.5 ohms
Single wire
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
15.88 |
|
|
Temperature Sensor 240° F - 1/8-27NPTF
All Temperature sensors are designed to work with VDO gauges only. Sensors are matched to gauges according to maximum reading on dial face. All sensors are standard ground (sensor case to common ground).
Please note: VDO sensors have tapered threads and DO NOT require the use of Teflon tape or pipe sealant. This will interfere with grounding causing incorrect instrument readings.
Features:
Marine 240°/250°F Temperature Sender
1/8-27 NTPF Threads
All brass construction
#8-32 Connection
Works with most standard marine temperature gauges
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
12.23 |
|
|
Honda Tank Fitting - 1/4" NPT Thread - 90HP+
This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.
Features:
Honda male fitting
Designed for 90HP+ (Large Bore)
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part number: 8902-6
|
6.00 |
|
|
Chrysler/Suzuki Tank Fitting - 1/4" NPT Thread
This Attwood Fuel Tank Male Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1/4" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.
Features:
Male tank fitting designed for Chrysler & Suzuki engines and fuel tanks
Designed for Under 75HP (Small Bore)
Material Construction: Chrome-plated Brass
*Specifically mates to Attwood part numbers: 8884-6 & 88FTS014-6
|
5.57 |
|
|
Mercury Tank Fitting - 1/4" NPT Thread
Connect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.
Features:
Solid machined brass for dependable performance, peace of mind
Quick-connect ¼-inch male thread makes installation easy
Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel
1/4" NPT (National Pipe Thread)
Specifically designed for Mercury/Mariner Brand engines and tanks
*Specifically mates to Attwood part number: 8890LP6
|
7.96 |
|
|
Yamaha Tank Fitting - 1/4" NPT Thread
Connect your tank and fuel lines with confidence. Solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Designed for Yamaha Brand engines and tanks and fits select Mercury/Mariner Brand engines.
Features:
Quick-connect 1/4-inch male thread makes installation easy
Solid machined brass for dependable performance and peace of mind
Designed for Yamaha and select Mercury/Mariner brand engines that use leaded, unleaded, and alcohol-blended fuel
*Specifically mates to Attwood part numbers: 8896LP6 & 88FHY516-6
|
8.16 |
|
|
RAM® Double Ball Adapter with 1/2" NPT Threaded Hole
Specifications:
Ball Size: C Size (1.5")
Weight Capacity: Standard Use: 4lbs, Heavy-Duty Use: 3lbs
Materials: Marine-grade aluminum
Packaging Type: Poly Bag
Weight: 0.4 lbs
|
26.87 |
|