Part #: PP5031 Description: Pre-Cut NavPod Protects Your Electronics In Harsh Conditions Pre-Cut for Raymarine C120W 20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Built to complement the latest in Marine Technology. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS.

PP4402 PowerPod Precut for Raymarine e7/e7D PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base. NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics. Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large 1.8" opening (1.1" on smaller models). This provides plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.

PP5203 PowerPod Pre-Cut for Raymarine c125/c127, e125/e127 PP5200 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels. All PowerPods include: Acrylic capped ABS plastic Chromed Stainless Steel tamper-proof fasteners Double seal for watertight integrity Swivel Base with large pass-through for wire harness Models are available Pre-Cut for popular electronics Sizing: Overall Size: 14.5"H x 16.625"W x 10.5"D Usable Face: 9.375"H x 14.5"W x 6.75"D Max Cutout: 9.375"H x 14.25"W

GP1049 SystemPod Precut f/Raymarine e9 (Plus Space) for 9.5" for Wide Pedestal Guard Part #: GP1049 NavPod Protects Your Electronics In Harsh Conditions The GP1049 SystemPod is precut for Raymarine's e9 with additional space for mounting other products. Made for 9.5" for wide pedestal guards. *See Literature tab for an image with dimensions

GP2049 SystemPod Precut f/Raymarine e9 (Plus Space) for 12" for Wide Pedestal Guard Part #: GP2049 NavPod Protects Your Electronics In Harsh Conditions The GP2049 SystemPod is precut specifically for Raymarine's e9 with additional space for mounting other products. Made for 12" wide pedestal guards. *See Literature tab for an image with dimensions

Part #: GP2031 Description: Pre-Cut NavPod Protects Your Electronics In Harsh Conditions Pre-Cut for Raymarine 12" C120W & E120W Grand Prix series outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners. NavPod allows you to place your electronics within reach.

Part #: GP1031 Description: Pre-Cut NavPod Protects Your Electronics In Harsh Conditions Pre-Cut for Raymarine 9.5" C120W Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. Polished stainless steel tamperproof fasteners.

PP4401 PowerPod Precut for Garmin GPSMAP 7407,7407xsv,7607,7607xsv,700,720,721,740,740s,741,721xs,741xs ecoMAP 70s,70dv Part #: PP4401 NavPod Protects Your Electronics In Harsh Conditions PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS. The PP4401 PowerPod is precut specifically for Garmin's 7" GPSMAP Series.

Part #: PP4805 Description: Pre-Cut NavPod Protects Your Electronics In Harsh Conditions Pre-Cut For Raymarine C70 20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS. Dimensions (13.00"w X 12.00"h X 9.5"d) Centimeters (33.02w X 30.48h X 24.13d).

Part #: PP5052 Description: Pre-Cut NavPod Protects Your Electronics In Harsh Conditions Pre-Cut For Raymarine C90W 20 Degrees for on dash mounting. Internal swivel mechanism made of reinforced nylon. Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability. PowerPods are simply a better way to mount your Radar/Chartplotter, Fishfinder or GPS.

PP5063 PowerPod Precut for Simrad NSS12 Part #: PP5063 NavPod Protects Your Electronics From Harsh Conditions The PP5063 PowerPod is precut specifically for Simrad's NSS12.

NavPod Part #:PP5056 Description:PowerPod, Precut for Garmin 6008 & 6208 NavPod Protects Your Electronics In Harsh Conditions Precut Models Includes all of the necessary parts in order to flush mount the unit Comes with a Flush Mount kit which includes a specific gasket and mounting hardware if not supplied by the manufacturer with the unit. Double Seal for Watertight Integrity Outer silicone seal is complemented by an internal seal made of memory resistant urethane foam gasketing that keeps its shape and sealing ability over many years.

RMX4101 RailMount Precut for Raymarine i70/ST60, Garmin GMI10 or Furuno F150 Part #: RMX4101 NavPod Protects Your Electronics From Harsh Conditions NavPod's mirror polished 316 Stainless Steel RailMount is supplied with adapter bushings to accomodate 1" or 1.25" Pedestal Guards. The RMX4101 RailMount is precut specifically for: Raymarine i70 Raymarine ST60 Garmin GMI10 Furuno F150

GP1809 SailPod Precut for Raymarine c95/c97 & e95/e97 for 9.5" Wide Pedestal Guard Part #: GP1809 NavPod Protects Your Electronics In Harsh Conditions The GP1809 SailPod is precut for Raymarine's c95/c97 & e95/e97 for a 9.5" wide pedestal guard.

GP2059 SailPod Precut for Raymarine c95/c97 & e95/e97 for 12" Wide Pedestal Guard Part #: GP2059 NavPod Protects Your Electronics In Harsh Conditions The GP2059 SailPod is precut for Raymarine's c95/c97 & e95/e97 for a 12" wide pedestal guard.