|
SnapIt! Marine P003 Flush Mount Pontoon Quad Drink Holder
This Quad Drink Holder is sized to fit can drinks with insulated sleeves and many mugs. The mug opening diameter is 3.625”. Interior Dimension are 3.895x8.12”. Overall Height 3.86”. Overall Width 18.4”. Cutouts on top ring can be useful for hanging sunglasses, etc.
Flush mount unit not suited for use in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White
|
62.00 |
|
|
SnapIt! Marine P005 Top Mount Pontoon Quad Drink Holder
Quad Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Mug Opening Diameter 3.625”. Interior Dimension 3.895”(3.45” at narrowest point)x8.12”. Overall Height 3. 6”. Overall Width 18.4”. Top mount unit can be used in combination with P0011 tables. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
62.00 |
|
|
Double Drink Holder sized to fit can drinks with insulated sleeves and many mugs. Interior Dimension 3.625”(2.9” at narrowest point)x7.85”. Overall Height 3.8”. Cutout on top ring can be useful for hanging sunglasses, etc. Comes with universal mounting bracket which allows the use of a variety of accessories in one location. Mounting bracket permanently mounts to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
29.00 |
|
|
Dual/Quad Drink Holder with Suction Cups
This expandable drink holder offers a flexible solution mounting easily to most surfaces with suction cups. Expands from dual to quad holders conserving space when not in use. Accommodates drink containers up to 3-1/2" in diameter. Impact resistant injection molded nylon construction.
|
20.77 |
|
|
Flush Mount 30° Nylon Rod Holder - White
Corrosion-free nylon rod holder. These 30° light-duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV-resistant Nylon, these rod holders are tough and corrosion-free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws (not included).
|
4.16 |
|
|
Flush Mount 30° Nylon Rod Holder - Black
Corrosion-free nylon rod holder. These 30° light-duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV-resistant Nylon, these rod holders are tough and corrosion-free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws (not included).
|
4.16 |
|
|
62 Series Carbon Monoxide Alarm - 12V - 62-542-Marine - Flush Mount - White
Mini Carbon Monoxide Alarm with a compact space saving design that replaces your CO alarms that are over 5 years old!
Features:
Space Saving
Compact design for boats
Designed for the harsh marine environment
No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating
Advanced Technology - Alarm Mute button silences alarm while boat is ventilated
Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain
Reliable - 12 Volt power means no missing or dead batteries to replace
Memory Scan™ - Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless your detector has memory
Micro Current Technology - Saves precious battery power in a boat
62-541-R-Marine and 62-542-R-Marine include normally closed relay
Use to turn on exhaust fans, remote horns/lights/signals or connect to alarms systems
Listed to UL 2034 Marine Use and CSA 6.19-01
|
59.93 |
|
|
62 Series Carbon Monoxide Alarm - 12V - 62-542-Marine - Flush Mount - Black
Mini Carbon Monoxide Alarm with a compact space saving design that replaces your CO alarms that are over 5 years old!
Features:
Space Saving
Compact design for boats
Designed for the harsh marine environment
No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating
Advanced Technology - Alarm Mute button silences alarm while boat is ventilated
Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain
Reliable - 12 Volt power means no missing or dead batteries to replace
Memory Scan™ - Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless your detector has memory
Micro Current Technology - Saves precious battery power in a boat
62-541-R-Marine and 62-542-R-Marine include normally closed relay
Use to turn on exhaust fans, remote horns/lights/signals or connect to alarms systems
Listed to UL 2034 Marine Use and CSA 6.19-01
|
59.93 |
|
|
62 Series Carbon Monoxide Alarm w/Relay - 12V - 62-542-R-Marine - Flush Mount - Black
Mini Carbon Monoxide Alarm with a compact space saving design that replaces your CO alarms that are over 5 years old! The 62-542-R-Marine includes a normally closed relay. Used to turn on exhaust fans, remotes, horns, lights, signals or connect to alarm systems.
Features:
Space Saving
Compact design for boats
Flush Mount
Designed for the harsh marine environment
No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating
Advanced Technology - Alarm Mute button silences alarm while boat is ventilated
Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain
Reliable - 12 Volt power means no missing or dead batteries to replace
Memory Scan™- Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless your detector has memory
Micro Current Technology - Saves precious battery power in a boat
62-541-R-Marine and 62-542-R-Marine include normally closed relay
Use to turn on exhaust fans, remote horns/lights/signals or connect to alarms systems
Listed to UL 2034 Marine Use and CSA 6.19-01
|
62.93 |
|
|
4" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0
With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Spreader light
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Spreader Light
Aft deck fishing lights
Foredeck lights
Accent lighting
Game fishing lights
Boat wake lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 0.35 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”
Mounting Holes: 5-5/8” apart horizontally
In the Box:
4” marine white flush mount spreader light
Wiring pigtail
Stainless steel mounting kit
*Sold as an Individual
|
147.00 |
|
|
4" Marine Flush Mount Spreader Light - Black Housing - Pro Series 3.0
With the increasing size of boats and the major popularity of Black Oak's 4" Marine Scene Spreader Lights, Black Oak's 4 Inch Flush Mount Marine Spreaders were born. Perfect for larger center consoles, sportfish yachts, and many other applications. This light gives off a whopping 3,120 raw lumens and a very widespread 120-degree light pattern.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Spreader light
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Spreader Light
Aft deck fishing lights
Foredeck lights
Accent lighting
Game fishing lights
Boat wake lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 0.35 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Depth): 6-3/8" x 3-3/16" x 2-1/4”
Mounting Holes: 5-5/8” apart horizontally
In the Box:
4” marine black flush mount spreader light
Wiring pigtail
Stainless steel mounting kit
*Sold as an Individual
|
142.80 |
|
|
2" Marine Flush Mount Spreader Light - Black Housing - Pro Series 3.0
READY FOR ANYTHING! This 2-inch flush mount LED light bar is the perfect addition to any hardtop for the boater in need of deck lighting. The 2 inch black marine flush mount spreader light throws light at a 120 degree beam angle, giving users extremely widespread dispersion without a hot spot, and is perfect for area lighting when fishing at night or getting ready early in the morning.
With the flick of a switch, users can see that this marine spreader light is built with quality parts. From the moment users put this Black Oak 2 Inch Black Marine Flush Mount Spreader Light in their hand, it becomes completely clear how this spreader light can take the beating Black Oak claims it can. This small light bar comes complete with a wiring pigtail and everything needed to mount and get going!
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Spreader light
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Deck or spreader lights
Trailer lighting
Rear bumper lights
Work lights
Mower lights
Golf cart lighting
Technical Specifications:
Total Wattage: 20W
Amp. Draw: 1.4
LED Quantity: 2
Weight: 0.7 lbs.
Raw Lumens: 1560
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”
Mounting Holes: 3-1/2” apart horizontally
In the Box:
2” marine black spreader light
Wiring pigtail with deutsch connector
All hardware, ready to install!
*Sold as an Individual
|
94.08 |
|
|
2" Marine Flush Mount LED Pod Light - Diffused Optics - White Housing - Pro Series 3.0
Extremely Versatile, the Marine Flush Mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything else users can mount this powerful 2x2 LED light on.
Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30+ types of harsh conditions. If users are looking at a reverse light or a light for their rear bumper, the Diffused option is the perfect setup, throwing light out in a 120° pattern! This flush-mount LED truck light puts out an unimaginable amount of light, considering its compact appearance.
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Diffused lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Front bumper lighting for trucks and Jeeps
Reverse lights
Work lights
Headache rack lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.6 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height): 4-7/8" x 3-5/8"
In the Box:
2” flush mount pod light with diffused optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual
|
139.50 |
|
|
2" Marine Flush Mount Spreader Light - White Housing - Pro Series 3.0
Black Oak LED's Marine Flush Mount Spreader Light is the perfect low profile mount for fiberglass T-Tops, gunwale mounting, and any other location where users need low-profile lighting with a huge output. This light uses 2 - 10w Cree LEDs, producing 1,560 lumens and throwing in a 90° pattern, which is perfect for lighting fore and aft decks as well as any area lighting that users may need. These lights are DuPont powder coated to make sure they can take sun and salt exposure and still look as great as the day they were purchased. All of Black Oak's lights have the highest IP rating available, IP69k, which means users don't have to worry about the location of these lights; they can take any amount of water thrown at them!
Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.
Features:
Spreader light
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Spreader Light
Aft deck fishing lights
Foredeck lights
Accent lighting
Game fishing lights
Boat wake lights
Technical Specifications:
Total Wattage: 20W
Amp. Draw: 1.4
LED Quantity: 2
Weight: 0.7 lbs.
Raw Lumens: 1560
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Depth): 4-1/4" x 2-3/8" x 2-1/2”
Mounting Holes: 3-1/2” apart horizontally
In the Box:
2” marine white spreader light
Wiring pigtail
Stainless steel mounting kit
*Sold as an Individual
|
98.28 |
|
|
Convertible 2 in 1 Drink Holder sized to fit can drinks or 20 oz plastic soft drink bottles. Space saving unit conveniently opens to hold two drinks when needed. I.D. 2.9” Overall Height 4.6”. Mounts permanently to 1 ¼” square rail commonly found on pontoon boats. No drilling required. All mounting hardware included. Color: White.
|
27.00 |
|