OEM gauges for outboards, stern drives and gas powered inboards. Light gray dials with clean black numerals, and black pointer hub with white staff. Scratch resistant domed glass lens with black bezel. Combined blue through-dial with white perimeter lighting provides a unique look and high visibility.

OEM Style instruments with crisp tan details and fire orange pointer tip, providing a unique look for any dash. Scratch resistant domed glass lens with combined red through-dial and white perimeter lighting for great readability day or night.

OEM style featuring clean-looking black dials with white and red graphics and through-dial and perimeter lighting for optimum readability. Scratch resistant domed glass lens.

OEM style featuring clean-looking black dials with white and red graphics and through-dial and perimeter lighting for optimum readability. Scratch resistant domed glass lens.

Stylish stainless steel bezel design, black on white graphics. Domed glass sheds water and resists scratching. A comprehensive family of instruments for outboards, stern drives and inboards, including diesels. Lido instruments feature crisp white dials and fire-orange pointer tips. Red through-dial and white perimeter lighting for great night readability. NOTE: Mariner 30 & 40 HP 2-cylinder engines require a module (Merc. part no. 17461A2) when using Lido tachometer.

Gianneschi SUPER LARIO 3 Bronze Hand Pump 1 1/4" Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 13.2 GPM at 95 feet head (40 PSI), Bronze construction, Bronze impeller. Inlet Port is 1-1/4 Inch, Discharge Port is 1-1/4 Inch.   Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Ideal for outboards and stern drives. Features polished stainless steel bezel, brushed aluminum dial with black pointer, scratch resistant curved lens and perimeter lighting. US & metric scales with ISO symbols where appropriate. 3" gauge requires 3-13/32" cutout, 2" gauge requires 2-1/8" cutout.

Ideal for outboards and stern drives. Features polished stainless steel bezel, brushed aluminum dial with black pointer, scratch resistant curved lens and perimeter lighting. US & metric scales with ISO symbols where appropriate. 3" gauge requires 3-13/32" cutout, 2" gauge requires 2-1/8" cutout.

Newport SS 4" Tachometer with System Check Indicator for Suzuki Gas Outboard - 0 to 7000 RPM The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.   Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night.  Features:  Perimeter lighted Retro White Dial Black and Gray Graphics  Domed fog resistant lens  Two-piece Black pointers  Hand-polished Stainless Steel bezel Studded connection for ring terminals Red illuminated edge-lighting Technical Specifications:  Operating Range  - 0 to 7000 RPM and System Check Indicator 3.375" (85 mm) Mounting hole Operating Voltage - 12/24 V In the box: Gauge Mounting Hardware Installation Manual Factory P/N TC9496 *Sold as an Individual **Gauge Covers not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Battery Optimization System (B.O.S.) - 12V - 4-Bank The Pro Charging Systems Battery Optimization System keeps batteries balanced enabling maximum performance. The system can quadruple run time on the water for boaters and other users. Premature battery failure due to an unbalanced pack has unfortunately been accepted as the ‘norm’ for decades. The B.O.S. breaks through those accepted “norms” and solves the problem with a BSAP-24 algorithm that can accurately predict and select the battery that needs additional energy to match the other batteries within the pack. This simultaneously and successfully extends the life of each battery in the pack. The net result is substantially increased run times and extended battery life.  The Battery Optimization System is the perfect companion device to utilize with Pro Charging Systems advanced battery chargers. B.O.S. is compatible with PROView™ Link battery monitoring software that enables you to monitor your battery status via your smart phone or tablet. The PROView™ Link App is available to download for free at the Apple and Google Play stores. Learn more about the capabilities of PROView™ Link at the Energy Management page.    Applications: Inland Watercraft, Saltwater Watercraft, Motorhomes, Industrial, Golf Carts, Utility Carts and more. Features: Approved for use with Wet Cell, AGM and Lithium Ion batteries Designed for 12V batteries Designed for use in fresh and saltwater Up to four batteries in series BSAP-24 Battery Selection and Prediction Algorithm on board   Less than 1mA sleep mode Self-powered The Battery Optimization System is compatible with most Lithium* batteries.  *Always verify with PCS before using with Lithium batteries. *Use PROVIew™ Link to configure B.O.S. for use with approved lithium batteries. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Stylish stainless steel bezel design, black on white graphics. Domed glass sheds water and resists scratching. A comprehensive family of instruments for outboards, stern drives and inboards, including diesels. Lido instruments feature crisp white dials and fire-orange pointer tips. Red through-dial and white perimeter lighting for great night readability. NOTE: Mariner 30 & 40 HP 2-cylinder engines require a module (Merc. part no. 17461A2) when using Lido tachometer.

Flex-Fit™ PRO Polyester Size 2 Boat Cover for V-Hull Runabout or Tri-Hull Boats I/O or O/B - Grey *14'-16' Centerline Length *86" Max Beam Width Available in 10 sizes that fit practically all 14 – 23 foot boats. Economically priced, our Flex-Fit™ PRO universal cover is an excellent choice for storage and trailering. Our Flex-Fit™ PRO boat covers feature a strong and durable 1/4″ shock cord encased into the hem for a snug fit. One tie-down kit is included for quick and easy tie-down. Mesh Storage bag is included. Poly-Flex II - Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Boat Types: V-Hull Runabouts I/O or O/B Tri-Hull Boats I/O or O/B Tri-Hull Bass Boats Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Flex-Fit™ PRO Polyester Size 4 Boat Cover for V-Hull & Tri-Hull Boats I/O or O/B - Grey *17'-19' Centerline Length *96" Max Beam Width Available in 10 sizes that fit practically all 14 – 23 foot boats. Economically priced, our Flex-Fit™ PRO universal cover is an excellent choice for storage and trailering. Our Flex-Fit™ PRO boat covers feature a strong and durable 1/4″ shock cord encased into the hem for a snug fit. One tie-down kit is included for quick and easy tie-down. Mesh Storage bag is included. Poly-Flex II - Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Boat Types: Tri-Hull Boats I/O or O/B  V-Hull Boats I/O or O/B Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Flex-Fit™ PRO Polyester Size 3 Boat Cover for Fish & Ski Boats I/O or O/B & Wide Bass Boats - Grey *16'-19' Centerline Length *96" Max Beam Width Available in 10 sizes that fit practically all 14 – 23 foot boats. Economically priced, our Flex-Fit™ PRO universal cover is an excellent choice for storage and trailering. Our Flex-Fit™ PRO boat covers feature a strong and durable 1/4″ shock cord encased into the hem for a snug fit. One tie-down kit is included for quick and easy tie-down. Mesh Storage bag is included. Poly-Flex II - Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Boat Types: Fish & Ski Boats I/O or O/B Wide Bass Boats Tournament Ski Boats Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA