Wiper Motor 1000 Series - 12V - 2.5" Shaft - 110° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Wiper Motor 1000 Series - 12V - 2.5" Shaft - 80° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Wiper Motor 1000 Series - 12V - 1.5" Shaft - 110° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Wiper Motor, 1000 Series, 12V, 2.5" Shaft, 65° Sweep The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps

Wiper Motor 1000 Series - 12V - 1.5" Shaft - 80° The 1000 Waterproof Wiper Motor has a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic. It powers 18" Deluxe arm and 18" Deluxe blade combination at sweep sets of 80 degree or less or 16" Deluxe arm and 16" Deluxe blade combinations at a sweep set of 110 degree. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 50 degree, 65 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) 12 volt heavy-duty motor with anti-rotation drive shaft Knurled drive shaft and solid brass arm drive nut Coast to park with adjustable right or left self parking Retail version includes 5 amp fuse and holder (on/off switch not included) RF shielded circuitry Weight: 1.75 lbs Available in two shaft lengths: 1.5" and 2.5" (includes .5" length of knurled arm fitting) Measures approximately 6.625" L x 3.375"W x 2" D Stall torque: 55 in-lbs (63 kgf/cm; 6.2 Nm) Stall current: 9.8-10.0 amps No load current: 0.8-1.2 amps+

Wiper Motor MRV 12V 2.5" Shaft - 80° The MRV Wiper Motor easily powers 22" x 22" deluxe arm/blade combinations, or a 20" x 20" premier arm/blade combination at sweep sets of 80 degree or less. Features: Factory pre-set sweep of 80 or 110 degrees adjustable to 45, 60, 80 or 110 degrees 0.625" diameter shaft (16 mm) Available in 3 shaft lengths: 1.5", 2.5" and 3.5" (includes 0.5" length of knurled arm fitting) Corrosion-resistant casing Heavy-duty motor with right angle drive Two-speed motor, can be operated as one speed Solid brass knurled drive nut with brass and stainless steel drive shaft Adjustable right or left self parking, coast to park Retail version includes 5 amp fuse and holder Stainless steel fasteners and mounting bracket Use with three-position switch (not included) Compact size - 7.625" L x 4" W x 2" D Stall torque: 109 in-lbs (125 kgf/cm: 12.3 Nm) Stall current: 11.5 to 13.0 amps No load current: 0.5 to 1.2 amps

Waterproof Wiper Motor 12V - 2.5" Shaft - 80° Sweep The 1.5 Waterproof Wiper Motor is made with a fully sealed powder coated aluminum waterproof base and housing to power a 22" Deluxe arm and 22" Deluxe blade combination or a 20" Premier arm and 20" Premier blade combination. Features: Available in three shaft lengths: 1.5", 2.5" and 3.5" (includes .5" length of knurled arm fitting) Factory pre-set sweep angles of 80 degrees or 110 degrees, with easy adjustment to 45 degrees or 60 degree Chrome plated solid brass knurled drive nut with brass and stainless steel driveshaft Two-speed motor Sealed 6" wire leads, 16 AWG Adjustable right or left self-parking 0.625" diameter shaft (16 mm) Available in 12V and 24V models Coast to park RF shielded circuitry Retail version includes 5 amp fuse and holder (operating switch not included) Measures approximately 7.75" L x 4" W x 2.75" D Stall torque: 109 in-lbs (125 kgf/cm; 12.3 Nm) Stall current: 11.5-13.0 amps No load current: 0.5-1.2 amps Replaces AFI 2000 motor

Wiper Motor, STD, 12V, 2.5" Shaft - 80° The STD Wiper Motor powers up to 14" x 14" arm/blade combinations. The motor is protected by a corrosion-proof aluminum alloy case with black crackle finish. The base and mounting plates are chrome plated naval brass. Features: Maximum current draw: 2 amps 80 deg or 110 deg adjustable sweep, adjustable right or left self-parking Shaft diameter: 0.375" windshield mount, 0.5" deck mount Dimensions: 3.875" L x 2.25" W x 3.5" D

Wiper Motor, MRV, 12V, 3.5" Shaft - 80° The MRV Wiper Motor easily powers 22" x 22" deluxe arm/blade combinations, or a 20" x 20" premier arm/blade combination at sweep sets of 80 degree or less. Features: Factory pre-set sweep of 80 degree or 110 degree adjustable to 45 degree, 60 degree, 80 degree or 110 degree 0.625" diameter shaft (16 mm) Available in 3 shaft lengths: 1.5", 2.5" and 3.5" (includes .5" length of knurled arm fitting) Corrosion-resistant casing Heavy-duty motor with right angle drive Two-speed motor, can be operated as one speed Solid brass knurled drive nut with brass and stainless steel drive shaft Adjustable right or left self parking, coast to park Retail version includes 5 amp fuse and holder Stainless steel fasteners and mounting bracket Use with three-position switch (not included) Compact size - 7.625" L x 4" W x 2" D Stall torque: 109 in-lbs (125 kgf/cm: 12.3 Nm) Stall current: 11.5-13.0 amps No load current: 0.5-1.2 amps

Heavy Duty Waterproof 2-Speed Wiper Motor - 2.5" Shaft - 12V High Performance at a Competitive Price. Your boat's windshield wipers are only as powerful as the motor that power them. The Ongaro Heavy Duty Waterproof Motor offers the security of waterproof protection and delivers dependable, trouble-free operation all at a competitive price. Easily replaces older Ongaro and Bosch-type wiper motors for a simple, yet powerful, upgrade. Features: Torque of 15 N-m Two speeds Accepts up to 24 x 24" arm and blade Self-parking gear to left or right Adjustable sweep angle 12V Improved waterproof rating to IP66 Rigid aluminum housing Insulated grounding EMC protected CE Approved Additional Features: Two sweep speeds of 35 or 55 sweeps per minute The sweep angle can be adjusted from 40 to 110 degrees High quality all aluminum housing dissipates heat more efficiently than plastic for longer motor life The aluminum construction also provides better stability when mounted The insulated grounding is suitable for use with steel, aluminum, wooden or GRP boats Guaranteed for 3 years

Standard Wiper Motor - 2.5" Shaft - 12V  Features: Black Powder Coated Aluminum cover 304 Stainless Steel Mounting Plate, Shaft & Mounting Hardware 80° or 110° Adjustable Sweep Will Power up to a 14" Arm & Blade Guaranteed 3 Years

Heavy Duty 2-Speed Wiper Motor - 2.5" Shaft - 12V  Features: Black Powder Coated Housing 304 Stainless Steel Mounting Plate & Mounting Hardware 316 Stainless Steel Shaft Chrome Plated Brass Shaft Housing Adjustable Sweep 45°, 60°, 80°, & 110° Adjustable Park Position Right or Left Will Power up to a 24" Arm & 22" Blade Guaranteed 3 Years

Pro-Series Generation 2 Gears & Shaft Kit  Replacement gears and shaft kit for Pro-Series and Pro-Fish windlasses. Compatible With: Pro-Series and Pro-Fish windlasses. *Sold as an Individual 

BURKS 350GA6-2-5 1/8, PUMP AND MOTOR UNSPSC Code: 40150000

BURKS 375G6-2-5.88, BRONZE FITTED CENTRIFUGAL PUMP Closed coupled centrifugal pump having 2-1/2" NPT Inlet x 2" NPT Outlet features a voltage rating of 230/460 VAC 6.06 in impeller Bronze fitted   UNSPSC Code: 40150000