|
12V Mini Hidden Horn
Marinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware.
Features:
Type 304 stainless steel diaphragm
Dimensions: 3.25" W x 1.75" H x 3" L
Maximum amp draw: 3 Amps
dB(A)?rating: 105 at one meter
Fundamental frequency: 430 +/- 20Hz
Not designed for installation in exposed areas
|
18.31 |
|
|
12V Mini Compact Electric Horn
The Mini Compact Electric Horn has a totally sealed sound unit with type 304 stainless steel cover, diaphragm and mounting bracket.
Features:
Dimensions: 3" L x 3.25" W x 1.75" H
Maximum amp draw: 3 amps, 12 volt
dB(A) rating: 106 at one meter
Fundamental frequency: 430 +/- 20Hz
|
21.34 |
|
|
12V Mini Twin Comapct Electric Horn
The Mini Twin Electric Horn has two totally sealed sound units with type 304 stainless steel covers, diaphragms and mounting bracket.
Features:
Dimensions: 3" L x 8" W x 1.75" H
Maximum amp draw: 6 amps, 12 volts
dB(A) rating: 109 at one meter
Fundamental frequency: 490 +/- 20; 430+/-20Hz
|
43.49 |
|
|
12V International Shorty Horn
The International Shorty Horn has a stainless steel diaphragm and mounting bracket in an ABS, triple chrome-plated housing.
Features:
Dimensions: 4.25" L x 5" W x 6.5" H
Maximum amp draw: 4.5 Amps, 12 Volt
Fundamental frequency: 310 +/- 20 Hz
Loudest Marinco compact electric horn
dB(A) rating: 123 at one meter
|
102.72 |
|
|
12V MiniBlast Compact Single Horn with Black Cover
The MiniBlast Compact Electric Horn features a long-lasting, non-corrosive ASA plastic cover and a sealed sound unit with stainless steel diaphragm.
Features:
Mounts in same hole pattern as the 10035 horn
Dimensions: 4.375" L x 3.375" W x 2" H
Maximum amp draw: 3 amps, 12 volt
dB(A) rating: 106 at one meter (3 feet)
Fundamental frequency: 430 +/- 20Hz
|
18.67 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
12V Chrome Plated Dual Trumpet Mini Air Horn
The Marinco FullBlast compressor driven air horns are the loudest and most complete line of 12V air horns available. All of our air horns produce sound levels ranging between 120 and 127dB, which means all of our air horns meet the ABYC and NMMA regulations for boats up to 20 meters/66 feet. Both 12 and 24 volt compressors are CE listed.
Features:
Solid brass construction
Non-corrosive Lexan polycarbonate diaphragm. LEXAN is a registered trademark of Sabic Innovative Plastics IP B.V., Netherlands
Includes compressor, air tubing, fittings and hardware
12V compressor produces 9-11 PSI
Dimensions: 9.5" L x 5" W x 3.75" H
Maximum amp draw: 12 volt: 20 amps, 24 volt: 10 amps
dB(A) rating: 127 at one meter, 1/3 octave band
Fundamental frequency: 630+/-15, 525+/-15Hz
Chrome Plated
|
235.16 |
|
|
White Epoxy Coated Single Trumpet Mini Air Horn
The Marinco FullBlast compressor-driven air horns are the loudest and most complete line of 12V air horns available. All of our air horns produce sound levels ranging between 120 and 127dB, which means all of our air horns meet the ABYC and NMMA regulations for boats up to 20 meters/66 feet.
Features:
Solid brass construction
Non-corrosive Lexan® polycarbonate diaphragm. LEXAN® is a registered trademark of Sabic Innovative Plastics IP B.V., Netherlands
Includes compressor, air tubing, fittings, and hardware
Dimensions: 9.5" L x 3.5" W x 3.5" H
Maximum amp draw: 12 volts: 20 amps, 24 volt: 10 amps
dB rating: 126 at one meter, 1/3 octave band
Fundamental frequency: 630+/-15Hz
Horn Sound Video
|
179.14 |
|
|
Hidden Mount Mini Compact Horn
Hidden Mount Mini Compact Horn is constructed of powder coated steel. At 107 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577068.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
18.14 |
|
|
12V Chrome Plated Single Trumpet Mini Air Horn
The Marinco FullBlast compressor driven air horns are the loudest and most complete line of 12V air horns available. All of our air horns produce sound levels ranging between 120 and 127dB, which means all of our air horns meet the ABYC and NMMA regulations for boats up to 20 meters/66 feet. Both 12 and 24 volt compressors are CE listed.
Features:
Solid brass construction
Non-corrosive Lexan® polycarbonate diaphragm. LEXAN® is a registered trademark of Sabic Innovative Plastics IP B.V., Netherlands
Includes compressor, air tubing, fittings and hardware
Dimensions: 9.5" L x 3.5" W x 3.5" H
Maximum amp draw: 12 volt: 20 amps, 24 volt: 10 amps
dB rating: 126 at one meter, 1/3 octave band
Fundamental frequency: 630+/-15Hz
|
175.56 |
|
|
Mini Compact Single Hidden Horn - 12V
Features:
304 Stainless Steel Trumpets, Diaphragm, and Mounting Brackets
Meets ABYCA-23 for boats up to 12 meters
Pre-wired
Fits existing hole patterns
Much louder than competitive models
Specifications:
Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm)
Max Amp Draw: 3 Amps
Rating: 105 db@ 1 Meter
|
22.28 |
|
|
All-Stainless Mini Compact Single Hidden Horn - 12V
Features:
All Stainless Steel Inside & Out
304 Stainless Steel inside and out including a sealed sound unit
No rust
Guaranteed for 5 years.
All meet ABYC A-23 for boats up to 12 meters
Pre-wired
Fits existing hole patterns
Specifications:
Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm)
Max Amp Draw: 3 Amps
Rating: 105 dB @ 1 Meter
|
37.08 |
|
|
Drop-In Hidden Horn w/ Black and White Covers
Low profile drop in horn with grills. Design allows easy installation. Easily retrofitted. Comes with black and white cover. 12V. Designed for ABYC standards for boats up to 20 meters.
|
31.67 |
|
|
Drop-In Hidden Horn V.1 with Grills
Drop-In Hidden Horn V.1 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet snap-in grill. Hole size 1-7/8" x 3-3/8". At 106 decibels and a frequency (Hz) of 440±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577064.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
33.66 |
|
|
Drop-In Hidden Horn V.2 with Grills
Drop-In Hidden Horn V.2 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet snap-in grill. Hole size 1-7/8" x 3-3/8". At 108 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577065.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
35.00 |
|