MaxBlast Stainless Steel Trumpet 12V Horn - Single MaxBlast Single Trumpet Air Horn is constructed of durable stainless steel.  When installed, the trumpet should point slightly downward to permit water drainage. Specifications: Stainless Steel Single 12V WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MaxBlast Stainless Steel Trumpet 12V Horn - Dual MaxBlast Dual Trumpet Horn is constructed of durable stainless steel. When installed, the trumpet should point slightly downward to permit water drainage.  Specifications: Stainless Steel Dual 12V WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MaxBlast Air Horn - Mini Dual Trumpet  MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 125 decibels and a frequency (Hz) of 630±15A/525±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66’). 12VDC. Maximum: 20A. NMMA Type Accepted #2577058. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MaxBlast Air Horn Compressor - 12V The MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. Maximum: 20A. 12 or 24VDC. CE compliant. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MaxBlast Air Horn Compressor - 24V The MaxBlast Air Horn Compressor works with all Sea-Dog® MaxBlast air horns. For use in standard installations where head room is not an issue. Does not include air tubing or mounting hardware. Maximum: 20A. 12 or 24VDC. CE compliant.

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low Pitch Features: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm) Max Amp Draw: 3 Amps. Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers Rating: 106 dB @ 1 Meter Installed

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V High Pitch Features: High pitched 304 Stainless steel inside and out 5-year Guarantee Prewired Mounting holes have 4" centers Hardware not included 3"L x 3-1/4"W x 1-1/2"H (7.5 x 8 x 4.5cm)

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12V Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.  Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Warm White LED - Stainless Steel Bezel - 12V Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.  Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Blue LED - Stainless Steel Bezel - 12V Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.  Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)

Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - Red LED - Stainless Steel Bezel - 12V Attractive, energy efficient lighting for interior and exterior use. Hella Marine round LED courtesy lamps can be installed almost anywhere on board. Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps. Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure.  Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment. Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer.  Specifications: Lens Material: UV resistant enhanced impact acrylic Rim Material: UV resistant plastic. 316 stainless steel Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 120mm of single core marine cable Operating Voltage: 12V DC or 24V DC Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V ) Degree of Protection: IP 67 - Completely Sealed Mounting: Stainless steel screws included Weight: 50g (including cable)

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30°  The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included). 

Aurora Stainless Steel LED Pop-Up Table Light - 3W with Touch Dimmer Switch Aurora LED Pop-Up Table Light automatically switches on with a simple twist of the cap, allowing the light to pop-up, ready to use. Push the cap down, twist to lock, and the light switches off and disappears into the table or deck. Can be used with LED Touch Dimmer Switch (403061-1). Constructed of corrosion resistant investment cast 316 stainless steel cap and bezel. Installs with #10 FH fasteners (included). Produces 500 lumens. 12-24V. IP67 waterproof rating.  Features: Investment Cast 316 Stainless Steel/ABS LED Touch Dimmer Switch This LED Continuous Adjustment Dimmer without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant 304 stainless steel. 1.5A max. 12/24VDC. IP67 waterproof rating.  Features: 304 Stainless Steel

Cast Stainless Steel Handle/Latch - 3-3/4" x 3" The Hatch Handle Latches feature a handle that pivots out to open hatches and lays flush when not in use for a clean appearance. Ideal for use on doors, hatches, lazarettes, and dock boxes. Adjustable locking arm adds additional security. Once installed, the locking arm can be trimmed to length. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four #8 FH fasteners (not included).

EuroLED 75 3" Round Screw Mount Down Light - Warm White LED - Stainless Steel Rim - 12V Stylish, reliable and energy efficient, these lamps will provide excellent illumination to enhance interior and exterior spaces. The EuroLED 75 uses a highly efficient optical system that produces a very wide and even illumination that is specifically designed to reduce individual light source glare, which can lead to discomfort and eye strain. This precision optic, coupled with the latest LED technology delivers exceptional color rendering, reproducing colors in their natural richness. The EuroLED 75 replicates the pleasing appearance of a traditional round lamp but contains all the advantages of a high efficacy, durable solid state light - giving you the best of both worlds. EuroLED 75 is available in warm or neutral white which will beautifully enhance the materials chosen for your vessel. Screw or spring mount options, pre-wired and sized for a standard cut out make new or refit installation a breeze. Hella marine EuroLED lamps are completely sealed and manufactured using the highest grade materials that will not corrode, fade or embrittle in the harsh marine environment. Innovative, ceramic based thermally conductive materials dissipate heat generated by the LED’s, thereby extending the life of the luminaire, whilst being completely corrosion free. This means you can use the same light fittings for both the interior and exterior to create a clean and consistent lighting plan. Like all Hella marine LED lamps the EuroLED 75 is supported by a 5 year warranty for complete peace of mind. Specifications: Rim material: UV resistant plastic or 316 stainless steel options Color Temperature: 5000K (White), 2700K (Warm White) Dimming: Via PWM or Voltage Resistive dimmer Cable: Pre-wired with 150mm tinned marine cable Operating Voltage: 12V or 24V DC options Power Consumption: <3W ( <0.19A @ 12V DC / <0.1A @ 24V DC) Degree of Protection: IP6K7 & IP6K9K (Completely sealed) Installation: Screw or Spring Clip options Approvals: CE, RCM Manufactured In: New Zealand