Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive Only The AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives. The Mixing Tip Is Easily Replaced Should The Glue Set Up. We Recommend 5 Mixing Tips Per Cartridge Of Adhesive. A 10:1 Adhesive Plunger Is Included With Gun.

Adhesive Dispensing Gun The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.

AT-388 Dispensing Gun The AT-388 Adhesive dispensing gun comes with a 10:1 plunger. For Use With 50mL Cartridges of: AT-880 Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge.  The AT-880 is a 10:1 mix ratio with a teardrop-shaped cartridge, which will not fit in the other Weld Mount Systems dispensing guns.

AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 Adhesives AT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives.

Industrial Kit with AT-8040 Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Kit Contains 1 Tubes Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastics And Rubber. AT-8040 Will Hold Even Our Heaviest Parts On An Overhead Or Vertical Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year. The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications. The AT-7001 Kit Contains: (1) AT-8040 - No Slide Multi Bonder Adhesive With 12 Minute Kick (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive (1) AT-300 - Adhesive Dispensing Gun (30) AT-3B - Small Black Cable Tie Mount (100) AT-5B - Large Black Cable Tie Mount <(25) AT-5 - Large White Cable Tie Mount (25) AT-7 - Aluminum Base Swivel Wire Tie Mount (25) AT-9 - Aluminum Wire Tie Mount (2) AT-113 - Large Footman's Strap White (2) AT-113B - Large Footman's Strap Black (6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base (6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base (2) SHC-1000 - Single Hose Clamp 1.00" (2) DHC-1000 - Double Hose Clamp 1.00" (1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25" Step By Step Instructions

{Standard Start-Up Kit - No Adhesive The 65109 Start Up Kit has a wide variety of Weld Mount parts designed to give the user the chance to try numerous applications at a low cost. Kit Contains: 1 pc AT-300 Adhesive Dispensing Gun 5 pc. AT-850 Adhesive Mixing Tips 50 pc. AT-5 White Tie Mount 2 pc. AT-113 Blarge Black Footman's Strap 4 pc. ST125-1420-12SS 1.00" Stainless Stud 1 Plano Storage Box 11" x 7.25" x 2.75"

Industrial Kit - No Adhesive This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications. The AT-7008 Kit Contains: (10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive (1) AT-300 - Adhesive Dispensing Gun (30) AT-3B - Small Black Cable Tie Mount (100) AT-5B - Large Black Cable Tie Mount (25) AT-5 - Large White Cable Tie Mount (25) AT-7 - Aluminum Base Swivel Wire Tie Mount (25) AT-9 - Aluminum Wire Tie Mount (2) AT-113 - Large Footman's Strap White (2) AT-113B - Large Footman's Strap Black (6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base (6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base (6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base (2) SHC-1000 - Single Hose Clamp 1.00" (2) DHC-1000 - Double Hose Clamp 1.00" (1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25" Step By Step Instructions

2.25" Tall Stainless Stud w/#10 x 24 Thread Utilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

March 893-10-1/4" 24V Pump W/ 1286-0002-0100

10:1 Gun Plunger for AT-6030 Adhesive 10 Pack Gun Plunger for AT-6030 Adhesive

10:1 Gun Plunger for AT-6030 Adhesive Single Pack gun plunger for AT-6030 Adhesive

No Slide Metal/Composite Bonder Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping. Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used. Features: Revolutionary Adhesive Parts Stay Where Placed Without Sliding For Use Overhead and on Vertical Surfaces No Need for Fixtures

No Slide Metal/Composite Bonder - Case of 10 Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping. Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used. Features: Revolutionary Adhesive Parts Stay Where Placed Without Sliding For Use Overhead and on Vertical Surfaces No Need for Fixtures Case of 10

AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10 Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated. Features: Square Mixing Tip 4" Long Case of 10

AT-850 Square Mixing Tip 4" - Case of 50 Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated. Features: Square Mixing Tip 4" Long Case of 50