740 IP Thru-Hull Camera
Features an IP Camera to allow complete control despite no moving parts. View on your PC, Laptop, Network Display, Cell Phone, or Tablet.
Control of the IP model is achieved in conjunction with Iris Centre camera management software, allowing digital pan, tilt, and zoom functionality and video recording, payback, and management. Iris Centre can handle multiple cameras and is available for download.
Features:
Aluminum Bronze Bezel
Hard Anodised Aluminum Housing
IP68 Waterproof Aluminum Housing
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1232.40 | |
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
||
Miniature Marine PTZ Dome Camera - Stainless Bezel - Hi-Def Ethernet IP - 10x Digital Zoom - 4 in 1 Video Format
The IRISx106 range of multi-format miniature, controllable cameras are the smallest marine PTZ cameras available on the market and provide fast, smooth variable speed control in a variety of formats to suit your requirements.
The IRIS106 features a high-resolution camera sensor that can be switched to output analog (CVBS), AHD, HD-TVI, and HD-CVI video formats depending on your requirement. In analog mode (default) the camera will connect directly to all MFDs that feature a composite video input to provide a crisp, clear video image. Set the camera to HD-TVI and connect via one of our Hybrid recorders or TVIHDMI encoders and you will achieve 1080P High Definition video in real-time compatible with MFDs that feature digital (HDMI / DVI) inputs.
The camera can be controlled by our IRIS595 joystick controller, TE01 rotary controller, or via an Iris HVR interface. Data communication to the camera is achieved via a two-wire RS485 serial data connection.
The camera housing is designed to be as small as possible, simplifying installation and fitting in discreetly with the boat's aesthetic, unlike other large, unsightly marine PTZ cameras. The body of the camera is made from lightweight but tough ABS plastic, and the dome is cast from smoke acrylic. The camera housing is finished off with a marine-grade stainless steel bezel available in high polish (standard). A surface mount bracket is also available for the camera (Part Number: BRK106), facilitating installation directly onto a bulkhead. This is often used when installing in engine rooms where it is not possible to recess mount the device.
Because of its small size and sleek design, the IRIS4106 can be used for deck, companionway, and tender monitoring, engine room monitoring, and as part of your onboard surveillance system. In summary, the 4106 is a very versatile, robust, and controllable marine PTZ camera.
Features:
Marine Grade 316 Stainless Case
The smallest PTZ dome available (86 mm)
IP
Huge compatibility
Easy installation & low power
Stylish high-polished finish
Fast, responsive pan, tilt, and zoom operation
Specifications:
Lens (millimeter): F1.8 / F=4.9mm 49mm
Image Sensor (inch): 1/4” Omnivision OV9712
Image Processing: H.264 Video Codec, Dual Stream 1-30fps adjustable
Effective Pixels: 921,600
Resolution: 1080P/720P
Min Illumination: 0.1 Lux (Colour) / 0.01 Lux (B/W)
Illumination: NA
IR Distance: 10m
Day / Night: Auto / Day / Night
S/N Ratio: >50dB
Optical Zoom: 10x
Digital Zoom: 10x
Wide Dynamic Range: Supported
BLC: Supported
3D DNR: Supported
Mirroring: Horizontal Flip / Vertical Flip
AGC: 0-32
Pan Details: 360-degree Continuous Rotation / Speed 0.5300-degree sec
Tilt Details: 0 90-degree / Speed 0.5300-degree sec
Network: Ethernet RJ45 (10/100 Base-T)
Protocol: TCP/UDP/HTTP/MULTICAST/UPnP/NTP/ RTSP/ONVIF-S 2.4
Power over Ethernet: Supported
P2P: Supported
Smart Phone: Android / iOS
Compatibility: PC-Based Systems. For the latest MFD compatibility please contact IRIS
Max Users: 32 Users
Power: +12VDC / PoE IEEE802.3aF
Power Consumption: 1A Max
Operating Temperature: -35-degrees C + 60-degrees C
Dimensions (millimeter): Bezel OD = 154mm, Panel Cutout = 122mm, Depth Behind Panel = 58mm (For IRIS4106 model additional space should be allowed for RJ45 Connector), Draft = 73mm
Ingress Protection: IP66
Weight: 1.1Kg
Material: 316L Stainless Steel Bezel, Polycarbonate Dome, ABS Plastic Housing
|
1422.00 | |
High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 Stainless Steel & 120-Degree Horizontal Field of View - 2.8mm Lens
Iris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application.
The IRIS-S460 is a high-definition 3MP IP camera that is directly compatible with Raymarine chart plotters (running LH2 / LH3 software), Navico MFDs (Simrad, Lowrance, B & Gs), and Furuno Timezero software v4.1 and above. Compatible with Garmin via the CMAC series of switchers, interfaces, and recorders.
The IRIS-S460 features built-in Power over Ethernet (PoE) or 12VDC operation and is ONVIF compliant, supporting multiple streams, variable bitrates, and a host of image settings, including image mirror and flip, color, contrast, and brightness settings.
The S460’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger's vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts.
Measuring only 58mm high by 60mm in diameter, the S460 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Built-in infrared LEDs operate automatically via a day/night filter to provide illumination up to 10 meters at night and in low-light conditions.
Whether you need a high-quality and rugged camera as part of your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, the IRIS-SX60 range of cameras is the perfect solution.
Features:
Marine Grade 316 Stainless Steel rugged corrosion-free case
Compatible with Raymarine / Axiom chart plotters running LH2 and higher
Compatible with Simrad, Lowrance & B & G
Compatible with Furuno software running TZ4.1 and above
Garmin Compatibility in conjunction with CMAC Systems
High polish finish
Built-in infra-red LED illumination (10m Range)
PoE & 12VDC connections
Extremely low power consumption
IP66 environmental protection
Specifications:
Lens (millimeter): 2.8mm
Horizontal Field of View: 120-degree HFOV
Sensor (inch): 1/4” CMOS Sensor
Resolution: Variable - 1920x1080P (2MP) max
Interface: RJ45 10/100 base t ethernet
Video Processing: H.264 Codec / dual stream
Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF
Onvif: Profile S v2.4
Bitrate: VBR / CBR 32kbps 8Mbps
Illumination: 6 x 850nm infra-red - 10-meter range
Lens/Field of View: 2.8mm option
Mirroring: Horizontal & vertical - configure via browser
Automatic Gain control: Supported / multiple levels
Compatibility: Raymarine / Axiom (LH2 or higher), NAVICO MFDs inc SIMRAD / LOWRANCE, B & G, Furuno Timezero v4.1 and higher. PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser, CMAC systems
Operating Temperature: -30 +60
Connections: Water-resistant RJ45 Socket / non-PoE with DC power socket
Material: 316 Stainless Steel
Power: PoE IEEE802.3af / 12VDC <200mA max.
Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H
Environmental: IP66
|
439.56 | |
Iris High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 SS & 80-Degree HFOV - 3.6mm Lens High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 Stainless Steel & 80-Degree HFOV - 3.6mm Lens
Iris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application.
The IRIS-S460 is a high-definition 3MP IP camera that is directly compatible with Raymarine chart plotters (running LH2 / LH3 software), Navico MFDs (Simrad, Lowrance, B & Gs), and Furuno Timezero software v4.1 and above. Compatible with Garmin via our CMAC series of switchers, interfaces, and recorders.
The IRIS-S460 features built-in Power over Ethernet (PoE) or 12VDC operation. It is ONVIF compliant, supporting multiple streams, variable bitrates, and a host of image settings, including image mirror and flip, color, contrast, and brightness settings.
The S460’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger's vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts.
Measuring only 58mm high by 60mm in diameter, the S460 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Built-in infrared LEDs operate automatically via a day/night filter to provide illumination up to 10 meters at night and in low-light conditions.
Whether you need a high-quality and rugged camera for your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, the IRIS-SX60 range of cameras is the perfect solution.
Features:
Marine Grade 316 Stainless Steel rugged corrosion-free case
Compatible with Raymarine / Axiom chart plotters running LH2 and higher
Compatible with Simrad, Lowrance & B & G
Compatible with Furuno software running TZ4.1 and above
Garmin Compatibility in conjunction with CMAC Systems
High polish finish
Built-in infra-red LED illumination (10m Range)
PoE & 12VDC connections
Deficient power consumption
IP66 environmental protection
Specifications:
Lens (millimeter): 3.6mm
Horizontal Field of View: 80-degree HFOV
Sensor (inch): 1/4” CMOS Sensor
Resolution: Variable - 1920x1080P (2MP) max
Interface: RJ45 10/100 base t ethernet
Video Processing: H.264 Codec / dual stream
Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF
Onvif: Profile S v2.4
Bitrate: VBR / CBR 32kbps 8Mbps
Illumination: 6 x 850nm infra-red - 10-meter range
Lens/Field of View: 1.8mm wide angle option
Mirroring: Horizontal & vertical - configure via browser
Automatic Gain Control: Supported / multiple levels
Compatibility: Raymarine / Axiom (LH2 or higher), NAVICO MFD’s inc SIMRAD / LOWRANCE, B & G, Furuno Timezero v4.1 and higher. PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser, CMAC systems
Operating Temperature: -30 +60-degrees C
Connections: Water-resistant RJ45 Socket / non-PoE with DC power socket
Material: 316 Stainless Steel
Power: PoE IEEE802.3af / 12VDC <200mA max.
Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H
Environmental: IP66
|
439.56 | |
High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 Stainless Steel & 160-Degree Horizontal Field of View - 1.8mm Lens
Iris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application.
The IRIS-S460 is a high-definition 3MP IP camera that is directly compatible with Raymarine chart plotters (running LH2 / LH3 software), Navico MFDs (Simrad, Lowrance, B & Gs), and Furuno Timezero software v4.1 and above. Compatible with Garmin via our CMAC series of switchers, interfaces, and recorders.
The IRIS-S460 features built-in Power over Ethernet (PoE) or 12VDC operation and is ONVIF compliant, supporting multiple streams, variable bitrates, and a host of image settings, including image mirror and flip, color, contrast, and brightness settings.
The S460’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger's vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts.
Measuring only 58mm high by 60mm in diameter, the S460 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Built-in infrared LEDs operate automatically via a day/night filter to provide illumination up to 10 meters at night and in low-light conditions.
Whether you need a high-quality and rugged camera as part of your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, the IRIS-SX60 range of cameras is the perfect solution.
Features:
Marine Grade 316 Stainless Steel rugged corrosion-free case
Compatible with Raymarine / Axiom chart plotters running LH2 and higher
Compatible with Simrad, Lowrance & B & G
Compatible with Furuno software running TZ4.1 and above
Garmin Compatibility in conjunction with CMAC Systems
High polish finish
Built-in infra-red LED illumination (10m Range)
PoE & 12VDC connections
Extremely low power consumption
IP66 environmental protection
Specifications:
Lens (millimeter): 1.8mm
Horizontal Field of View: 160-degree HFOV
Sensor (inch): 1/4” CMOS Sensor
Resolution: Variable - 1920x1080P (2MP) max
Interface: RJ45 10/100 base t ethernet
Video Processing: H.264 Codec / dual stream
Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF
Onvif: Profile S v2.4
Bitrate: VBR / CBR 32kbps 8Mbps
Illumination: 6 x 850nm infra-red - 10-meter range
Lens/Field of View: 1.8mm wide angle option
Mirroring: Horizontal & vertical - configure via browser
Automatic Gain Control: Supported / multiple levels
Compatibility: Raymarine / Axiom (LH2 or higher), NAVICO MFD’s inc SIMRAD / LOWRANCE, B & G, Furuno Timezero v4.1 and higher. PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser, CMAC systems
Operating Temperature: -30 +60-degrees C
Connections: Water-resistant RJ45 Socket / non-PoE with DC power socket
Material: 316 Stainless Steel
Power: PoE IEEE802.3af / 12VDC <200mA max.
Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H
Environmental: IP66
|
439.56 | |
Mini Flush Mount Hi-Resolution Through-Hull Camera - CVBS, TVI, CVI, & AHD
Introducing the world's smallest through hull camera, the IRIS735 machined from corrosion-resistant marine-grade 316L stainless steel and measuring only 28 mm by 59mm long.
The 735 has been designed to sit flush into the hull, superstructure, or transom of your vessel to provide all-around coverage without impacting the tines of your vessel, with a bezel height of only 8.5mm.
The camera module itself features a Sony Starlight sensor to provide excellent performance in low light and can be user-set to output composite (CVBS) or analog Hi-Def (TVI, CVI, AHD) video formats. When set to CVBS, the 735 is compatible with all chart plotter models that support composite video inputs. When set to TVI, the 735 will provide high-definition real-time video, which can be viewed on MFDs via our CMAC systems or fed to a TV via our IRIS995 TVI/HDMI convertor.
The camera has a 140-degree wide-angle field of view, which makes it great to position along the sides and transom of your vessel to provide all-around coverage whilst docking and is also a great solution for sports fishing applications.
If you are looking for a tiny, cost-effective docking camera, a sports fishing camera, or an unobtrusive camera to add to your onboard security setup, the IRIS735 is the perfect solution.
The IRIS735 is also a perfect choice for robust and reliable semi-covert cameras for emergency response and law enforcement vehicles.
Features:
Micro-Compact Form Factor 28MM X 36MM (8MM From Panel)
316L Marine Grade, Corrosion-Proof Stainless Steel Body
4-In-1 Video Format (User Selectable) – CVBS, TVI, CVI, AHD
2.9MM Wide-Angle Lens
Starlight Sensor for Superb Low Light Operation
Compatible With All Chart Plotters Supporting Composite or Analog Video
Compatible With CMAC and CMAC HVR Systems
Set to TVI for HD TV Viewing with the IRIS995 Converter
IP67 Environmental Rating
Extremely Low Power Consumption
Applications:
Perfect for extreme environments
Road traffic surveillance
Monitoring dynamic digital signage
Engine room monitoring
Deck monitoring
Fishing vessel monitoring & surveillance
Emergency vehicle camera applications
Animal / Food processing applications
Specifications:
Lens (millimeter): 2.9mm
Horizontal Field of View: 140-degree HFOV
Sensor (inch): 1/2.8” SONY STARVIS CMOS Sensor
Resolution: CVBS: 1920 x 1080P @ 30fps (NTSC) / 25fps (PAL) / 906H in CVBS mode
Minimum Resolution: 0.001 Lux (F-1.2)
Day & Night Operation: Auto / Colour / Monochrome / External
Video Output Modes: Analogue HD Modes: HD-TVI, HD-CVI, AHD / Analogue: Composite Video (CVBS) NTSC / PAL
Lens/Field of View: 2.9mm Standard (140-degree HFOV)
Shutter Speed: Auto / Manual (1/50(60) - 1/50,000 sec)
Defog: Off / Auto
White Balance: ATW / AWC / INDOOR / OUTDOOR / MANUAL / AWB
Back Light Compensation: OFF / BLC / HSBLC
D-WDR: Off / 08
SENS-UP: Off / x2 x30
DNR: Off / Low / Middle / High
Brightness: 0 - 100
Motion Detection: Off / On
Image Mirror: Off / Mirror / V-Flip / Rotate
Sharpness: 0 10 Steps
Material: 316L Marine Grade, Corrosion Resistant Stainless Steel
Power: DC12V +/-10% / 125mA (1.5W)
Weight: 0.1Kg
Dimensions: 28mm-diameter x 58mm
Environmental / EMC: EN60529 IP67 / EMC EN60945 (TBC)
Operating Temperature: -10-degrees C + 50-degrees C / <90% Humidity
|
374.46 | |
Miniature Marine PTZ Dome Camera - Stainless Bezel - Hi-Resolution Analogue Sensor - 1000TVL - 4 in 1 Video Format
The IRISx106 range of multi-format miniature, controllable cameras are the smallest marine PTZ cameras available on the market and provide fast, smooth variable speed control in a variety of formats to suit your requirements.
The IRIS106 features a high-resolution camera sensor that can be switched to output analog (CVBS), AHD, HD-TVI, and HD-CVI video formats depending on your requirements. In analog mode (default), the camera will be connected directly to all MFDs that feature a composite video input to provide a crisp, clear video image. Set the camera to HD-TVI and connect via one of our Hybrid recorders or TVIHDMI encoders, and you will achieve 1080P high-definition video in real time, compatible with MFDs that feature digital (HDMI / DVI) inputs.
The camera can be controlled by our IRIS595 joystick controller, TE01 rotary controller, or via an Iris HVR interface. Data communication to the camera is achieved via a two-wire RS485 serial data connection.
The camera housing is designed to be as small as possible, simplifying installation and fitting in discreetly with the boat's aesthetic, unlike other large, unsightly marine PTZ cameras. The body of the camera is made from lightweight but tough ABS plastic, and the dome is cast from smoke acrylic. The camera housing is finished off with a marine-grade stainless steel bezel with a high polish (standard). A surface mount bracket is also available for the camera (Part Number: BRK106) facilitating installation directly onto a bulkhead. This is often used when installing in engine rooms where it is not possible to recess mount the device.
Because of its small size and sleek design, the IRIS4106 can be used for deck, companionway, tender monitoring, engine room monitoring, and as part of your onboard surveillance system. In summary, the 4106 is a very versatile, robust, and controllable marine PTZ camera.
Features:
Marine Grade 316 Stainless Case
The smallest PTZ dome available (86 mm)
Analog
Huge compatibility
Easy installation & low power
Stylish high-polished finish
Fast, responsive pan, tilt, and zoom operation
Specifications:
Lens (millimeter): F1.8 / F=4.9mm 49mm
Image Sensor (inch): 1/3” Panasonic CMOS
Image Processing: Composite
Effective Pixels: 1944(H) x 1092(V) Approx 2.12M Pixels
Resolution: 1000TVL
Min Illumination: 0.1 Lux (Colour) / 0.01 Lux (B/W)
Illumination: NA
IR Distance: NA
Day / Night: Auto / Day / Night
S/N Ratio: >48dB
Optical Zoom: 10x
Digital Zoom: 10x
Wide Dynamic Range: Off / Low / Middle / High (WDR SNR 120dB)
BLC: Off / BLC
3D DNR: Off / Low / Middle / High
Mirroring: Horizontal Flip / Vertical Flip
AGC: 0-32
Pan Details: 360-degree Continuous Rotation / Speed 0.5300-degree sec
Tilt Details: 0 90-degree / Speed 0.5300-degree sec
Network: NA
Protocol: PELCO-D / RS485 serial data
Power over Ethernet: NA
P2P: NA
Smart Phone: NA
Compatibility: All MFDs with Composite Video Input
Max Users: NA
Power: +/-12VDC
Power Consumption: 0.8A Max
Operating Temperature: -20-degree C + 60-degree C
Dimensions (millimeter): Bezel OD = 154mm, Panel Cutout = 122mm, Depth Behind Panel = 58mm (For IRIS4106 model additional space should be allowed for RJ45 Connector), Draft = 73mm
Ingress Protection: IP66
Weight: 1.1Kg
Material: 316L Stainless Steel Bezel, Polycarbonate Dome, ABS Plastic Housing
|
1374.60 | |
Thru-Hull Fittings
|
||
Sitex SVS-760CF Chartplotter/Sounder w/B744V-CX Thru Hull Transducer Combo
The versitile SVS-760CF is a combination digital echo sounder and chartplotter with built-in 50-channel GPS receiver capable of running both C-MAP MAX and Navionics Gold cartograph.
The 50/200kHz SVS-760 sounder features powerful 600W output and a vertically oriented, sunlight viewable 7.5" color LCD display that optimizes presentation of bottom composition/contour and fish targets beneath the vessel. With depth ranges down to 4,800 feet, a high-resolution color LCD display, clearly marked controls and large, easy-to-use controls, this sounder is ideal for professional users as well as serious sportfishing duty.
SI-TEX's digital sounding technology eliminates unwanted noise and provides a sharp image of the seabed and fish targets. The unit's high-speed CPU delivers seamless zooming and provides superior readings even at higher boat speeds. This powerful processor also ensures that even the smallest fish targets are presented on the display. Among the SVS-760CF's long list of professional sounder features are White Line/Black Line Bottom Discriminator to separate bottom-hugging fish from the sea floor, Auto/Manual Gain and Range Selection, Bottom Lock, Bottom Zoom and A-Scope. Users can select from various fish symbols based on the size and type of targets being marked.
For enhanced operation and awareness, alarms are provided for Depth, Fish School and Water Temperature. The SVS-760CF also features an SD card slot, allowing fishermen to back up information and record data on important fishing spots.
The SVS-760CF delivers all this fishfinding performance with the added capabilities of a powerful chartplotter. The ability to run both types of cartography in the same machine allows boaters to select the platform that works best for their region, personal preference and specific boating needs on any given voyage. This machine also provides Navionics Sonar Chart Bathymetric recording capability, allowing boaters to survey their own areas and have this data added to the Navionics Sonar Chart Database. The unit is also Navionics Community Layer capable, allowing users to download the latest information for their chart area.
The SVS-760CF offers tremendous memory, with storage for 20,000 marks/waypoints, 100 routes and 50,000 track points. It is also designed for easy integration with SI-TEX's Metadata AIS module (or other AIS receivers) for enhanced situational awareness and safety at sea.
All this technology is contained in a rugged, compact IPX-7 waterproof case that can be mounted indoors or out, on any style or size of boat.
B744V Thru-Hull Triducer 600kW, 50/200kHzThe B744V Triducer Multisensor provides you with depth, speed, and temperature in one thru-hull housing. This unit is ideal for all 600 Watt fishfinders and requires only a single hole in the hull. The B744V's valve assembly prevents water from rushing into the hull when the insert is removed for cleaning or storage. The innovative housing design allows the TRIDUCER Multisensor to be fully recessed into its custom High-Performance Fairing. The end result is a streamlined installation. At speeds above 30 knots (34 MPH), the B744V will produce clear images and solid bottom tracking.
Features:
Thru Hull Bronze Housing
Frequency: 50/200 kHz
Cone: 45 Degrees/12 Degrees
Depth, speed, and temperature in one housing
Maximum depth range 50 kHz 235m to 353m (800' to 1,200') - 200 kHz 118m to 206m (400' to 700')
Greatly improved high-speed performance at both 50 kHz and 200 kHz when installed with a high-performance fairing
Self-closing sea valve reduces water flow into the hull when paddlewheel insert is removed
Speed Operating Range: 1 knot to 45 knots (1 MPH to 52 MPH)
The extra length of the B744VL allows mounting into thicker and/or high deadrise hulls
Boat Size: 9m (30') and up
Speed insert is easily removed for service or storage
Fins on sides of paddlewheel cavity improve accuracy at low speeds and in cross flow conditions
Valve assembly is replaceable
Airmar's fairings are easy to cut and will not swell or rot
8 pin connector
Shielding eliminates interference between the speed and depth sensors for more accurate instrument readings
Fishing Applications:
Inshore or coastal fishing in shallow to medium depths
Slow trolling, structure fishing and drifting
Deep-water lake fishing
|
1280.16 | |
Bronze Thru Hull Transducer
Bronze Thru-Hull Transducers are for large boats and for boats with in-board motors that make typical Transom Mount Transducers ineffective. They are not recommended for trailered boats as the transducer is not flush with the hull. Bronze Thru-Hull Transducers require that a hole be drilled in the hull and the shaping of a fairing block. Professional installation is recommended. Plastic Thru-Hull Transducers are an alternative to Bronze Thru-Hull Transducers.
Description: Bronze thru hull transducer, single or dual beam use. 20/60 degree, 200/83kHz. Transducer dimensions: 5.25L X 2.75"W X 1.2"D (below hull); Shaft diameter: .86". Fairing block not included.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
390.94 | |
Panoptix™ PS60 Thru-Hull Down Transducer
Panoptix™ is the most unique and innovative sonar on the water. The PS60 offers the same features as the PS30 transom mount version, but in a thru-hull installation. This configuration is ideal for coastal and offshore fishermen with larger boats. Panoptix PS60 transducer allows you to see fish and bait swimming under your boat - in real time. To truly appreciate Panoptix, you have to see it for yourself.
Features:
LiveVü Down - Provides real-time moving sonar images below the boat; see small baitfish and large target fish swimming around and pinpoint their destination left of right and their depth
RealVü 3-D Down - Scans the area below the boat from front to back and side to side, providing a full 3-D view showing bottom contour changes, fish and structure, even while stationary
RealVü Historical - Provides a wealth of historical sonar data - used for finding fish located throughout the entire water column in 3-D, from bottom to surface
Mounting Option - Stainless steel stem, fairing block and mounting hardware allow for thru-hull installation on a boat with a deadrise between 0 and 25 degrees
Includes:
Panoptix PS60 Thru-Hull Down Transducer
Stainless Steel Thru-Hull Mount
Fairing Block
Split Ring RJ45 Connector and Documentation
Integrated 30 ft network cable, 15 ft power cable
Compatible Devices:
GPSMAP® 7400/7600 Series
GPSMAP® 8000/8500 Series
GPSMAP® 721/741/820/840/1020/1040 Series Chartplotters
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
4399.99 | |
Explore E7 Thru Hull - 10 Degree Angle - Blue & White
The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design.
The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition.
The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht.
The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.
IP69k Protection & Temporary Rear Submersion Protection
As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k.
IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts.
The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.
Superior Protection. Total Peace of Mind.
Features:
10-degree angle for angled hulls
90-degree top beam
20-degree side beam
Up to 11,000 fixture lumens (ultra white)
Rectangular beam
Compact design and small external driver
Control by switch or DMX control
|
1956.71 | |
Explore E7 Thru Hull - 20 Degree Angle - Blue & White
The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design.
The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition.
The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht.
The new Explore E7 TH has patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.
IP69k Protection & Temporary Rear Submersion Protection
As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k.
IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts.
The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.
Superior Protection. Total Peace of Mind.
Features:
20-degree angle for angled hulls
90-degree top beam
20-degree side beam
Up to 11,000 fixture lumens (ultra white)
Rectangular beam
Compact design and small external driver
Control by switch or DMX control
|
1956.71 | |
Explore E7 Thru Hull - 30 Degree Angle - Blue & White
The Explore E7 TH is the perfect choice for transoms or to cater for angled hulls, that require a thru-hull style underwater LED light. The Explore TH has the same power and technical capabilities as the current E6 XFM but in a compact thru-hull design.
The OceanLED signature advanced optics result in an amazing in-water effect that accents a yacht’s exterior lines and imposing position in the water, without any loss of beam definition.
The defined, 90-degree angle of the beam from above (looking down), delivers a halo effect around the yacht with minimal dark space near the hull when spaced effectively around the yacht.
The new Explore E7 TH has a patent pending angling options from 10° up to 50°, sharing the same technology as the Explore XFM and Weld-in Series, but making it the first thru-hull underwater light on the market to have this ability.
IP69k Protection & Temporary Rear Submersion Protection
As part of our continuous strive for delivering the highest quality products to our customers, the Explore TH series is certified to have the highest achievable rating of protection against water ingress, also known as IP69k.
IP69k goes one step further than the industry standard IP68, the rating for continuous immersion in water. IP69k gives our customers total peace of mind when choosing the best possible solution for their yachts.
The rear of the light is protected from in-hull temporary submersion for boats where rough seas and waves sometimes flood the stern.
Superior Protection. Total Peace of Mind.
Features:
30-degree angle for angled hulls
90-degree top beam
20-degree side beam
Up to 11,000 fixture lumens (ultra white)
Rectangular beam
Compact design and small external driver
Control by switch or DMX control
|
1956.71 | |