|
Quick Radio Remote Control Receiver 913Mhz
Features
Number of relays - 2
Full power range (from 10.5 to 31Vdc).
Relay current carring capacity - 15 A
Power absorption in stand-by mode - 25 mA
Microcontroller-operated functions.
FSK modulation and carrier frequency 913Mhz
Operating temperatures from -15°C to +70°C
Indication of the system operating status, errors and problems by means of LED and seven-segment display
Protection against polarity inversion
Protection against low battery
50 transmitters can be stored
Translation mode to activate more receivers, installed in different spots, by means of one transmitter
Programmable digital filter
|
374.63 |
|
|
Quick Pocket Transmitter
Features
Number of keys - 2
Power supply - CR2450 3V litio alkaline-battery
Microcontroller-operated functions
FSK modulation and carrier frequency 913Mhz
Operating temperatures from -15°C to +70°C
Possibility to control more receivers with one transmitter
Two functions can be activated at the same time
Floating
|
126.32 |
|
|
Quick Hand Held Transmitter
Features
Number of Keys - 2
Power Supply - 3 alkaline AAA batteries or rechargeable Nims
Microcontroller-operated functions
FSK modulation and carrier frequency 913Mhz
Operating temperatures from -15°C to +70°C
Possibility to control more receivers with one transmitter
Two functions can be activated at the same time
Floating
Also working with rechargeable batteries
Keyboard backlighting by means of LEDs
|
178.60 |
|
|
Wireless Remote Control & Relay Harness
From the leader in the lighting industry. This wireless RF remote control and and relay harness is the standard in making any Heise light function via remote control.
The HE-WRRK is a wireless remote control and receiver with a simple 2 wire connection to the battery so no wires are needed to be ran inside the vehicle. It is designed to be used with one HEISE LED light bar, driving light, or work light.
If an additional light bar is desired the HE-EYHK (Y ADAPTER HARNESS KIT) can be purchased which allows two HEISE light bars, driving lights, or work lights 150 watts or less each to be used with the HE-WRRK
Specifications:
Nine (9) Different Flash Options
9' Harness Length
Black in color
In the Box:
One (1) Remote Control Receiver
One (1) Battery Operated FOB
One (1) Extension
One (1) Adapter
*Sold as an Individual
|
73.39 |
|
|
HRC1004 4 Button Remote Control
HRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use.
Applications
Designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc.
Features:
Watertight
4 buttons
|
196.02 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Ray73 VHF Radio with AIS Receiver
Raymarine’s Ray73 radiois communications central for your boat with built-in VHF, AIS andpublic-address capabilities. Built on our full-sized marine radio chassis, the Ray73 comes with oversized controls and a big screen for easy operation offshore.
Ray73 is a full-function VHF marine radio with Class D Digital Selective Calling (DSC) and a built-in GPS receiver. Simply program your boat’s MMSI number into the Ray73 and immediately benefit from the enhanced calling and safety features of DSC. The Ray73 supports both NMEA2000 and legacy NMEA0183 networking which enables it to connect with other onboard electronics. Ray63 also supports the connectionof an optional remotespeaker (A80542) to provide audio at a second location.
Ray73 also comes with a built-in loudhailer output. Add the optional hailing horn (M95435) and use your Ray73 tocommunicate with crewmembers on deck, on the dock, or on another boat. The Ray73 can also generate manual or automatic fog signals with built-intone and gong sounds that comply with all international regulations.
Ray73 also supports dual control stationswith the addition of the optional RayMic second station kit. With an oversized LCD and simple controls, the RayMic is a compact all-in-one handset that fits easily on any secondary helm, tower or navigation station. Use RayMic for station-to-station intercom capability too.
Ray73 was designed to comply with the latest international regulations and includes a connection point for an optional GPS/GNSS antenna system. The optional antenna improves the GPS reception when the radio is mountedbelow deck, inan enclosed pilothouse, or inside a metal enclosure.
Features:
Full-sized marine VHF with Digital Selective Calling
Built-in Automatic Identification System (AIS) receiver
Loudhailer output for public address and fog signaling
Optional RayMic second station kit for full remote control
Built-in GPS/GNSS receiver withan optionalexternal antenna connection
Comaptible with Raymarine wireless hub and wireless handset
Surface and trunnion mount kits included
Complements the style and design of Axiom multifunction displays
|
947.35 |
|
|
V-CAN Wireless Remote Controller for V-CAN Thrusters & BOW PRO
This system gives boaters full control of their electrically driven equipment on board. It includes a base unit, one remote control, and two connection cables. The VETUS wireless control handheld remote has a range of 10 to 25 m, depending on the location of the receiver, and delivers easy control of V-CAN Thrusters and BOW PRO models. The wireless remote control meets the EMC requirements.
Features:
For V-CAN Thrusters and BOW PRO models
Connectors for two thrusters (4 channels)
Open-air range is up to 10m
Maximum range is up to 25m when unimpeded
Specifications:
Remote Control
Power supply 3 VDC CR2032 (1x)
Protection Class: IP66
Frequency: 433.92 Hz
Temperature Range: 0°C - 70°C (+32°F - 158°F)
Weight: 50 g (2 oz)
Receiver
Power Supply: 8 VDC to 30 VDC
Maximum Current (per output): 8 A (at 30 Volts DC)
Protection Class: IP40
Frequency: 433.92 Hz
Temperature Range: 0°C - 70°C (+32°F - 158°F)
Weight: 800 g (28 oz)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
632.47 |
|
|
XD Series Triple Flex 2 Relay-ACR-Relay with Knobs & Tinned Wires
The Egis relay replaces three individual high-amp relays with one compact module, reducing space significantly, eliminating the cost of external link cable connections, eliminating the risk of link cable connections vibrating loose, and providing clear, unambiguous awareness of how to operate manual controls and what state the manual controls have forced the relay into.
Applications:
Designed to replicate common multi-battery switching and charge management functions - common dual battery load switching via the outer relays and a central automatic charging relay to share charge current are easily implemented
Multiple automatic charging relays (ACR) into one device - for 3-4 battery systems that require 2 or 3 ACRs, a single three-relay ACR provides drastic improvements in off-state quiescent current draw, space used, and reduces unnecessary interconnection cables.
Expandable with link and cross-link busbars to additional dual, triple, or single XD relays - supports 3 or 4 battery systems with standard busbar interconnect accessories.
Features:
Bullet-proof construction - sealed to IP67/IP6K9K, high temperature electronics and materials allow mounting anywhere; stainless steel cable lug studs; large mounting holes accept 1/4-20 / M6 attachment hardware
Intuitive manual control option simplifies operation and increases awareness of the state of the manual override and whether the device is being left in a locked-off or locked-on state (not available on competitive solutions)
Simple programming via simple dip switches allows each relay function significant flexibility for OEMs and installers.
35-75% reduction in mounting space and product weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts
Plug and play compatible with legacy competitor products - single, dual, and triple relay options are available with DTM/ATM connector pins compatible with ML Series bi-stable relays
90-95% less off-state current compared to competitive products and system solutions that require multiple devices for similar functionality
Specifications:
Total Continuous Current Amps: 500
Max Cranking Current (Amps): 1500
Mechanical Switching Life: 1,000,000 Cycles
Voltage Range (VDC): 8-36
Off-State Current Draw (mA): 1.3
State Change Current: 5A @ 12 VDC; 3A @ 24 VDC
Focal Features:
Led Status Display
The easy-to-see front-facing LED indicator provides visual device status, and the remote LED replicates the local on-device LED.
3-Position Manual override
Force each relay open or closed, and optionally leave the knob in either position to lock the relay in either condition.
40 Circuit Label Sheet Included
Convenient recesses for the included weatherproof label set make circuit and relay identification easy. Blank labels for custom applications.
Protective Cover included
Protects terminal studs and cable terminal edges from inadvertent shorts to each other or ground.
Stainless Hardware
Corrosion is no issue with quality stainless steel studs and self-locking flanged nuts.
Programmable
Via dip switches located under the protective cover. An easy-to-use configuration guide on the reverse makes custom settings a breeze to configure for a wide variety of applications.
Smaller Footprint
XD relays offer a high amp rating in a smaller package than competitive solutions, reducing installation space requirements to a minimum.
Integrated Vent
High-quality Gortex vents regulate internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments.
|
264.46 |
|
|
XD Series Triple Flex 2 Relay-ACR-Relay with Knobs & 3X DTM Connector
The Egis relay replaces three individual high-amp relays with one compact module, reducing space significantly, eliminating the cost of external link cable connections, eliminating the risk of link cable connections vibrating loose, and providing clear, unambiguous awareness of how to operate manual controls and what state the manual controls have forced the relay into.
Applications:
Designed to replicate common multi-battery switching and charge management functions - common dual battery load switching via the outer relays and a central automatic charging relay to share charge current are easily implemented
Multiple automatic charging relays (ACR) into one device - for 3-4 battery systems that require 2 or 3 ACRs, a single three-relay ACR provides drastic improvements in off-state quiescent current draw, space used, and reduces unnecessary interconnection cables
Expandable with link and cross-link busbars to additional dual, triple, or single XD relays - supports 3 or 4 battery systems with standard busbar interconnect accessories
Features:
Bullet-proof construction - sealed to IP67/IP6K9K, high temperature electronics and materials allow mounting anywhere; stainless steel cable lug studs; large mounting holes accept 1/4-20 / M6 attachment hardware
Intuitive manual control option simplifies operation and increases awareness of the state of the manual override and whether the device is being left in a locked-off or locked-on state (not available on competitive solutions)
Simple programming via dip switches gives each relay function significant flexibility for OEMs and installers.
35-75% reduction in mounting space and product weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts
Plug and play compatible with legacy competitor products - single, dual, and triple relay options are available with DTM/ATM connector pins compatible with ML Series bi-stable relays (This relay has 3x DTM connectors)
90-95% less off-state current compared to competitive products and system solutions that require multiple devices for similar functionality
Specifications:
Total Continuous Current Amps: 500
Max Cranking Current (Amps): 1500
Mechanical Switching Life: 1,000,000 Cycles
Voltage Range (VDC): 8-36
Off-State Current Draw (mA): 1.3
State Change Current: 5A @ 12 VDC; 3A @ 24 VDC
Focal Features:
Led Status Display
The easy-to-see front-facing LED indicator provides visual device status, and the remote LED replicates the local on-device LED.
3-Position Manual override
Force each relay open or closed, and optionally leave the knob in either position to lock the relay in either condition.
40 Circuit Label Sheet Included
Convenient recesses for the included weatherproof label set make circuit and relay identification easy. Blank labels for custom applications.
Protective Cover included
Protects terminal studs and cable terminal edges from inadvertent shorts to each other or ground.
Stainless Hardware
Corrosion is no issue with quality stainless steel studs and self-locking flanged nuts.
Programmable
Via dip switches located under the protective cover. An easy-to-use configuration guide on the reverse makes custom settings a breeze to configure for a wide variety of applications.
Smaller Footprint
XD relays offer a high amp rating in a smaller package than competitive solutions, reducing installation space requirements to a minimum.
Integrated Vent
High-quality Gortex vents regulate internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments.
|
272.26 |
|
|
HR24 HD/DVR Receiver - 110V AC for DIRECTV with RF/IR Remote Control - *Remanufactured
KVH Satellite Receiver with RF remote can be mounted in cabinets and hidden away located. Ideal for marine installations. The HR24 for DIRECTV is an HD DVR satellite receiver that ensures watching and recording television is convenient and seamless. Record two programs at once, stream on-demand video, watch Youtube videos and listen to Pandora, all from the same device. Sleek design with a touch sensitive panel, it comes with a self-programming remote and operates quietly. Energy-star certified.
Features:
500GB hard drive 400hrs SD
100hrs HD record time
2.8" H x 15.2" W x 11.8" D
110 VAC
Includes RF Remote control
HDMI
S-video
PLEASE CONTACT KVH FOR RECEIVER ACTIVATION: directv@kvh.com
|
280.94 |
|
|
RF Remote Control f/Explorer NavPro GPS
Radio Frequency Remote Control for Explorer NavPro GPS
Operate unit from multiple locations
|
149.99 |
|
|
Reactor™ Autopilot Remote Control
Rugged, Water-resistant Remote Places Autopilot Control in the Palm of Your Hand
Provides easy, convenient mode and steering control for your Garmin autopilot
Gesture control for heading hold and course corrections lets you simply point the remote where you want to go
Features a bright, sunlight-readable color display and an ergonomic design for comfort and control
Programmable preset buttons allow quick access to your favorite functions
Water-resistant design floats, in case it’s dropped in the water
Boasting a bright, sunlight-readable color display and an enhanced user experience, the Autopilot Remote also features a comfortable ergonomic design and programmable presets for quick access to your favorite functions. You can control steering with ease. The remote even lets you use gestures for heading hold and course corrections; just point the remote where you want to go. No need to worry if the remote takes a trip overboard, because it’s water-resistant and it floats. The Autopilot Remote includes both wrist and neck lanyards as well as a mountable cradle. And with a 45’ range, it’s functional from anywhere on the boat. It’s never been easier to place autopilot control in the palm of your hand.
For use with GHC 20 and compatible¹ chartplotters to control your autopilot.
¹Compatible chartplotters include GPSMAP 7x2/9x2/12x2 Touch, 10x2/12x2, 74/7600, 84/8600 and newer models.
In The Box:
Reactor autopilot remote control
Wrist lanyard
Neck lanyard
Documentation
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
242.99 |
|
|
XD Series Single Flex 2 Relay-ACR with Knobs - DTM Connector
This Egis relay provides a 35-75% reduction in mounting space and product weight via advanced bi-stable solenoid design and multiple solenoid assemblies that replace common electrical system layouts. The relay is expandable with link and cross-link busbars to additional dual, triple, or single XD relays. Also, the relay supports 2 or 3 battery systems with standard busbar interconnect accessories.
Applications:
Improved replacement/alternative to legacy solenoids and remote battery switches; Wire-for-wire compatible with Blue Sea ML-solenoid and ML-remote battery switch products
Forward-facing input studs make landing large wires easily, and a protective cover with integrated label recesses enables easy identification while providing anti-contact short protection
Features:
Bullet-proof construction, sealed to IP67/IP6K9K, and high temperature electronics and materials allow mounting anywhere; Stainless steel cable lug studs; Large mounting holes accept 1/4-20 / M6 attachment hardware
The intuitive manual control option simplifies operation and increases awareness of the state of the manual override and whether the device is being left in a locked-off or locked-on state (not available on competitive solutions)
Simple programmability via simple dip switches allows each relay function significant flexibility for OEMs and installers
Plug-and-play compatible with Legacy competitor products: Single, dual, and triple relay options are available with DTM/ATM connector pins for pin compatibility with ML Series bi-stable relays
90-95% less off-state current compared to competitive products and system solutions that require multiple devices for similar functionality
Specifications:
Total Continuous Current Amps: 500
Max Cranking Current (Amps): 1500
Mechanical Switching Life: 1,000,000 cycles
Voltage Range (VDC): 8-36
Off-State Current Draw (mA): 1.3
State Change Current: 5A @ 12 VDC; 3A @ 24 VDC
Focal Features:
Led Status Display
The easy-to-see front-facing LED indicator provides visual device status, and the remote LED replicates the local on-device LED.
3-Position Manual Override
Force each relay open or closed, and optionally leave the knob in either position to lock the relay in either condition.
40 Circuit Label Sheet Included
Convenient recesses for the included weatherproof label set make circuit and relay identification easy. Blank labels for custom applications.
Protective Cover Included
Protects terminal studs and cable terminal edges from inadvertent shorts to each other or ground.
Stainless Hardware
Corrosion is no issue with quality stainless steel studs and self-locking flanged nuts.
Programmable
Via dip switches located under the protective cover. An easy-to-use configuration guide on the reverse makes custom settings a breeze to configure for a wide variety of applications.
Smaller Footprint
XD relays offer a high amp rating in a smaller package than competitive solutions, reducing installation space requirements to a minimum.
Integrated Vent
High-quality Gortex vents regulate internal device pressure to eliminate moisture entry across seals and ensure long product life in harsh environments.
|
110.26 |
|
|
OP50 Wired Remote Control - Portrait Mount
Perfectly designed for mounting in a helm chair arm, between monitors, or in other locations suiting a portrait orientation, the Simrad OP50 Remote Controller provides intuitive keypad and rotary-dial command of up to six NSS evo2 or NSO evo2 multifunction displays.
Features:
Control up to six NSS evo2 or NSO evo2 multifunction displays
High-quality aluminium control dial with built-in cursor functions
Portrait orientation (landscape version also available)
Narrow design perfect for helm chair arm mounting
Dash mount with low 8mm profile
Zero-profile flush mount with optional bracket
Integrated high-decibel speaker for critical alarms
Quickly switch displays with dedicated button and LED indicators
Single NMEA 2000® connection
Manage Multiple Displays
Networked with a single NMEA 2000® connection for both power and control, one OP50 Remote Controller can operate up to six networked multifunction displays. Integrated LED indicator lights clearly show the selected display number, while a dedicated button cycles quickly through the available displays.
Controls Optimized for NSS evo2 and NSO evo2
The OP50 Remote Controller features a keypad specifically designed to operate the latest NSS evo2 and NSO evo2 multifunction displays efficiently and reliably in all conditions. The controller's high-quality aluminium dial features a knurled edge for precise rotary control, and built-in cursor functions for easy on-screen navigation.
Easy Mounting in Vertical or Portrait Orientation
The portrait OP50 is perfectly suited to mounting in the arm of a helm chair, with its narrow design and cable positioned specially to fit such installations. This orientation is also ideal for use in narrow consoles and beside Simrad MO-series touchscreen or pilothouse monitors. Dash mounting provides a slim 8mm profile, while an optional bracket allows total flush-mount installation.
Specifications:
NMEA 2000 Certified: Yes
Operating Temperature: -15°C to +55°C/5°F to 131°F
Waterproof Standard/Rating: IPX6 (from front when dash mounted with gasket) IPX2 (from back)
Product Width: 60mm/2.36"
Product Depth: 44.5mm/1.75"
Product Height: 150mm/5.9"
Product Weight: 0.3kg/0.66lb
Power Consumption: <100mA@13.5V
NMEA 2000 Load Equivalency Number: 2 network loads (100mA)
|
538.80 |
|