|
Adhesive Dispensing Gun
The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.
|
68.96 |
|
|
Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive Only
The AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives. The Mixing Tip Is Easily Replaced Should The Glue Set Up. We Recommend 5 Mixing Tips Per Cartridge Of Adhesive. A 10:1 Adhesive Plunger Is Included With Gun.
|
68.05 |
|
|
AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10
Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.
Features:
Square Mixing Tip
4" Long
Case of 10
|
14.98 |
|
|
AT-388 Dispensing Gun
The AT-388 Adhesive dispensing gun comes with a 10:1 plunger.
For Use With 50mL Cartridges of:
AT-880
Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge. The AT-880 is a 10:1 mix ratio with a teardrop-shaped cartridge, which will not fit in the other Weld Mount Systems dispensing guns.
|
89.18 |
|
|
Industrial Kit with AT-8040 Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System. The Kit Contains 1 Tubes Of Our AT-8040 No Slide Multi Bonder Acrylic Adhesive Which Will Bond To Almost All Surfaces Except Low Energy Plastics And Rubber. AT-8040 Will Hold Even Our Heaviest Parts On An Overhead Or Vertical Surface Without Fixturing. The Adhesive Sets in 12 Minutes And Is Heat Resistant To 225 Degrees. The Adhesive Should Be Refrigerated and Has A Shelf Life Of 1 year.
The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications.
The AT-7001 Kit Contains:
(1) AT-8040 - No Slide Multi Bonder Adhesive With 12 Minute Kick
(10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
(1) AT-300 - Adhesive Dispensing Gun
(30) AT-3B - Small Black Cable Tie Mount
(100) AT-5B - Large Black Cable Tie Mount
<(25) AT-5 - Large White Cable Tie Mount
(25) AT-7 - Aluminum Base Swivel Wire Tie Mount
(25) AT-9 - Aluminum Wire Tie Mount
(2) AT-113 - Large Footman's Strap White
(2) AT-113B - Large Footman's Strap Black
(6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base
(6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base
(2) SHC-1000 - Single Hose Clamp 1.00"
(2) DHC-1000 - Double Hose Clamp 1.00"
(1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25"
Step By Step Instructions
|
350.40 |
|
|
Industrial Kit - No Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For Industrial Maintenance Shops. A Wide Selection Of Weld Mount Parts Are Supplied In A Heavy "Durham" Metal Box Which Is A Standard Rack Mounted System.
The Weld Mount System Eliminates The Need To Drill And Tap, or Weld When Used On Metal Surfaces. Great for Mounting Wire and Conduit Runs, Electrical Boxes And Other Structural Applications.
The AT-7008 Kit Contains:
(10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
(1) AT-300 - Adhesive Dispensing Gun
(30) AT-3B - Small Black Cable Tie Mount
(100) AT-5B - Large Black Cable Tie Mount
(25) AT-5 - Large White Cable Tie Mount
(25) AT-7 - Aluminum Base Swivel Wire Tie Mount
(25) AT-9 - Aluminum Wire Tie Mount
(2) AT-113 - Large Footman's Strap White
(2) AT-113B - Large Footman's Strap Black
(6) ST125-1420-12SS - 0.75" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
(6) ST125-1024-12SS - 0.75" Long Stud With #10 x 24 Threads 1.25" Base
(6) ST125-1024-20SS - 1.25" Long Stud With #10 x 24 Threads 1.25" Base
(2) SHC-1000 - Single Hose Clamp 1.00"
(2) DHC-1000 - Double Hose Clamp 1.00"
(1) Storage Box - Durham Manufacturing 18.5' x 12.5" x 3.25"
Step By Step Instructions
|
318.40 |
|
|
{Standard Start-Up Kit - No Adhesive
The 65109 Start Up Kit has a wide variety of Weld Mount parts designed to give the user the chance to try numerous applications at a low cost.
Kit Contains:
1 pc AT-300 Adhesive Dispensing Gun
5 pc. AT-850 Adhesive Mixing Tips
50 pc. AT-5 White Tie Mount
2 pc. AT-113 Blarge Black Footman's Strap
4 pc. ST125-1420-12SS 1.00" Stainless Stud
1 Plano Storage Box 11" x 7.25" x 2.75"
|
103.49 |
|
|
AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 Adhesives
AT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives.
|
11.96 |
|
|
10:1 Gun Plunger for AT-6030 Adhesive
10 Pack Gun Plunger for AT-6030 Adhesive
|
61.20 |
|
|
10:1 Gun Plunger for AT-6030 Adhesive
Single Pack gun plunger for AT-6030 Adhesive
|
11.96 |
|
|
AT-850 Square Mixing Tip 4" - Case of 50
Weld Mount's AT-850 tip is for use only with the 2010, 4010, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.
Features:
Square Mixing Tip
4" Long
Case of 50
|
69.79 |
|
|
Acrylic Adhesive
CAN NOT SHIP AIR,UPS GROUND ONLY
AT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for composite and plastic bonding applications and not for bonding to metal substrates. Unlike other 2 part acrylic adhesives AT-4020 has a one year shelf life when stored at 72 degrees but is best refrigerated when ever possible. It is packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.
|
33.01 |
|
|
Acrylic Adhesive - 10-Pack
CAN NOT SHIP AIR,UPS GROUND ONLY
AT-4020 is a specially formulated adhesive for holding all our parts with little or no sagging in vertical or overhead applications. Cures in 10 - 12 minutes and has working strength within 40 minutes. AT-4020 is recommended for composite and plastic bonding applications and not for bonding to metal substrates. Unlike other 2 part acrylic adhesives AT-4020 has a one year shelf life when stored at 72 degrees but is best refrigerated when ever possible. It is packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.
|
298.64 |
|
|
Acrylic Adhesive
CAN NOT SHIP AIR,UPS GROUND ONLY
AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.
** AT 850 Mixing Tips sku 56273 required **
|
33.94 |
|
|
Acrylic Adhesive - 10-Pack
CAN NOT SHIP AIR,UPS GROUND ONLY
AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.
|
307.69 |
|