|
Acrylic Adhesive
CAN NOT SHIP AIR,UPS GROUND ONLY
AT-6030 is a 10 to 1 metal bonding adhesive. It has high viscosity and cures in 10 - 12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-6030 develops in excess of 2,500 lbs (psi) tensile strength on most metal surfaces making it an ideal alternative to welding in many applications. AT-6030 has a 6 month shelf life and should always be stored refrigerated. Packaged in a 38ml cartridge this adhesive must be used with our AT-301gun, AT-12 plunger and and AT-650 mixing tips. The 38ml cartridge will bond 80 - 120 parts.
|
33.01 |
|
|
No Slide Metal/Composite Bonder
Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.
Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.
Features:
Revolutionary Adhesive
Parts Stay Where Placed Without Sliding
For Use Overhead and on Vertical Surfaces
No Need for Fixtures
|
33.01 |
|
|
AT-14 1 to 1 Adhesive Gun Plunger f/AT-2010, AT-4020 & AT-6030 Adhesives
AT-14 is specifically for Weld Mount AT-2010, AT-4020 and AT-6030 adhesives.
|
11.96 |
|
|
No Slide Metal/Composite Bonder - Case of 10
Revolutionary Metal Bonder will hold heavy parts at application without sliding either on a vertical or overhead surface. AT-8040 will hold 3,500lbs in 40 minutes. No Welding, Drilling or Tapping.
Weld Mount AT-8040 is a solvent free, VOC Compliant, two part methacrylate-based, structural adhesive formulated to bond metals for use in severe environments. It will also bond engineered thermo- and thermosetting plastics, composites to metals or various substrate combinations. It has excellent adhesion to as received metal surfaces including aluminum, stainless steel, galvanized steel, and plated steels. AT-8040 forms a tough, high strength bonds usually with minimal surface preparation developing handling strength in 12 minutes and a functional cure within 45 minutes. Ultimate strength exceeds 3500 psi of tensile shear strength on aluminum with remarkable impact and peel strengths. AT-8040 will hold all Weld Mount parts on a vertical or overhead surface without sagging when properly used.
Features:
Revolutionary Adhesive
Parts Stay Where Placed Without Sliding
For Use Overhead and on Vertical Surfaces
No Need for Fixtures
Case of 10
|
298.64 |
|
|
Adhesive Dispensing Gun with 10:1 Plunger for AT-6030 Adhesive Only
The AT- 301 Adhesive Dispensing Gun Is Designed Specifically For Use With Our AT-6030 38 ml 10:1 Adhesive Cartridge. This Hand Operated Gun And Our Mixing Tips Provide Precise Mixing And Dispensing Of Our Adhesives. The Mixing Tip Is Easily Replaced Should The Glue Set Up. We Recommend 5 Mixing Tips Per Cartridge Of Adhesive. A 10:1 Adhesive Plunger Is Included With Gun.
|
68.05 |
|
|
10:1 Gun Plunger for AT-6030 Adhesive
10 Pack Gun Plunger for AT-6030 Adhesive
|
61.20 |
|
|
10:1 Gun Plunger for AT-6030 Adhesive
Single Pack gun plunger for AT-6030 Adhesive
|
11.96 |
|
|
Adhesive Dispensing Gun
The AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.
|
68.96 |
|
|
Aluminum Wire Tie
Used with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.
|
120.00 |
|
|
Aluminum Wire Tie
Used with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.
|
31.62 |
|
|
Acrylic Adhesive
CAN NOT SHIP AIR,UPS GROUND ONLY
AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.
** AT 850 Mixing Tips sku 56273 required **
|
33.94 |
|
|
Executive Fastener Kit - No Adhesive
This Kit Contains A Large Selection Of All The Common Weld Mount Parts And Is An Ideal Kit For The Full Service Yard Or Custom Builder. The Kit Does NOT Contain Acrylic Adhesive
The Weld Mount System Eliminates The Need To Drill Into Cored Composites Which Can Result In Hull & Deck Delaminations. No Need To Drill, Tap, or Weld When Used On Metal Surfaces. Great For Mounting Electronics, Wire Runs, Bilge Applications, Water Separators, Battery Switches, Etc.
The AT-1001008 Kit Contains:
(1) AT-300 - Dispensing Gun
(10) AT-850 - 3.5" Mixing Tips For AT-8040 Adhesive
(100) AT-5 - Large White Cable Tie Mount
(50) AT-3 - Small White Cable Tie Mount
(4) AT-113 - Large Footman's Strap
(10) PS62-832-16SS - 1.00" Long Panel Stud
(4) ST125-1420-16SS - 1.00" Long Stud With 1/4 x 20 Threads 1.25" Base
(4) ST125-1420-24SS - 1.50" Long Stud With 1/4 x 20 Threads 1.25" Base
(4) ST125-1024-12SS - .75" Long Stud With #10 x 24 Threads 1.25" Base
(4) ST125-1024-24SS - 1.50" Long Stud With #10 x 24 Threads 1.25" Base
(1) Plano Storage Box 14" x 9" x 2.75"
Step By Step Instructions
|
202.60 |
|
|
Acrylic Adhesive - 10-Pack
CAN NOT SHIP AIR,UPS GROUND ONLY
AT-2010 is our biggest seller and is a unique adhesive. It has high viscosity and will hold smaller parts without sagging. AT-2010 cures in 5 - 6 minutes, has a 4 minute working time and develops working strength in 15 -20 minutes. This makes AT-2010 the ideal adhesive for applications which require an immediate high strength bond. AT-2010 has a 6 month shelf life when stored at 72 degrees. We recommend that where ever possible this adhesive be refrigerated. Packaged in a 50ml cartridge and can be mixed by hand or by using our AT-300 gun and mixing tips. The 50ml cartridge will bond 150 - 200 parts.
|
307.69 |
|
|
AT-388 Dispensing Gun
The AT-388 Adhesive dispensing gun comes with a 10:1 plunger.
For Use With 50mL Cartridges of:
AT-880
Note: The AT-388 will ONLY work with the AT-880 Polypropylene Adhesive Cartridge. The AT-880 is a 10:1 mix ratio with a teardrop-shaped cartridge, which will not fit in the other Weld Mount Systems dispensing guns.
|
89.18 |
|
|
AT-850 Square Mixing Tip f/2010, 4020, & 8040 Adhesives - 4" - Case of 10
Weld Mount's AT-850 tip is for use only with the 2010, 4020, & 8040 adhesives. It's unique design eliminates any possibility of the cartridge plugging up as the entry is separated.
Features:
Square Mixing Tip
4" Long
Case of 10
|
14.98 |
|