Marine Kettle® Bulkhead or Square/Flat Rail Mount  This all 18-8 stainless steel mount attaches to any vertical flat surface such as bulkheads, hulls, transoms or cabin sides.  Also mounts to square or flat rails.  Fits horizontal rails up to 2-1/4" (57 mm) high by any depth or vertical  up to 1- 5/8" (41 mm) wide by any depth.   Rod portion of mount quickly disconnects for easy storage.  Some fasteners required for installation. Compatible With: Marine Kettle® Grills *Sold as an Individual 

Dual Side Bulkhead or Square/Flat Rail Mount This all 18-8 stainless steel mount attaches to any vertical flat surface such as bulkheads, hulls, transoms or cabin sides.  Also mounts to square or flat rails.  Fits horizontal rails up to 2-1/4” (57 mm) high by any depth or vertical rails up to 1- 5/8” (41 mm) wide by any depth.  Rod portion of mount quickly disconnects for easy storage. Some fasteners required for installation.  Compatible With: Dual Mounted Grills and Tables *Sold as a Pair

Marine Kettle® Pow'r GripFish Rod Holder Mount Made of 18-8 stainless steel and cast 356 hard anodized aluminum to endure the most severe marine environment.  This versatile mount fits most cylindrical type rod holders and allows grills to mount in any direction from the rod holder.  Its unique quick disconnect system allows instant installation or storage after use without tools.  Compatible With: Marine Kettle® Grills *Sold as an Individual 

Square Tube Rail Mount Fillet Table - 20"  Features: Solid one-piece construction for long life and easy maintenance Rail mounting system includes the 326599-1 Rail Mount Adapter, the 327197-1 Removable Square Rail Mount Clamps (pair), and all necessary hardware UV stabilized high-density polypropylene construction Medium, 20" wide by 12-5/8" deep Fits Square Tubing 1" - 1-1/4" diameter UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders, large includes hose holder and towel bar Knives and pliers not included

Square Tube Rail Mount Fillet Table - 30"  Features: Solid one-piece construction for long life and easy maintenance Rail mounting system includes the 326599-1 Rail Mount Adapter, the 327197-1 Removable Square Rail Mount Clamps (pair), and all necessary hardware UV stabilized high-density polypropylene construction Large, 30" wide by 12-5/8" deep with towel bar Fits Square Tubing 1" - 1-1/4" diameter UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders, large includes hose holder and towel bar Knives and pliers not included

Marine Kettle Mounting 8" Extension This Stainless Steel extension adds 8" (20.3 cm) to Marine Kettle grill mounting brackets.  Compatibility: Compatible with all Magma Marine Kettles "A10" series mounting brackets NOT compatible with marine kettle pedestal mount or table top legs *Sold as an Individual 

ShadeFin Mini Square Tube Rail Mount The ShadeFin Mini Square Rail Mount can be used on square rails from 1" to 1-1/2" outside diameter. The square rail mount's secure design can be mounted either vertically or horizontally, depending on preference. Features and Benefits: Includes mounting hardware Constructed out of aluminum-grade 6061 alloys with stainless steel Type-304 screws Includes an injection-molded nylon cap 3-year limited warranty Specifications: Finish: Powder coated, misty silver

Marine Kettle® Round Rail Mount - Standard Rails This round rail, quick-disconnect, all angle mounting bracket is made entirely of 18-8 stainless steel and 356 anodized aluminum to endure the most severe marine environment.  Fits any vertical, horizontal, or angled railing and detaches quickly for storage without tools leaving no hardware on the rail.  Fits rail size - 7/8" to 1" (2.22 to 2.54 cm) Compatible With: Marine Kettle® Grills *Sold as an Individual 

Marine Kettle® Round Rail Mount  - Oversized Rails  This round rail, quick-disconnect, all angle mounting bracket is made entirely of 18-8 stainless steel and 356 anodized aluminum to endure the most severe marine environment.  Fits any vertical, horizontal, or angled railing and detaches quickly for storage without tools leaving no hardware on the rail.  Fits rail size - 1-1/8" to 1-1/14" (2.86 to 3.18 cm) Compatible With: Marine Kettle® Grills *Sold as an Individual 

Marine Kettle® On-Shore Stand  Larger and more stable than the original.  Cook on-shore or any flat surface with this 18-8 stainless steel and brass grill stand.  It easily collapses for flat compact storage without tools.   Compatible With: All model Marine Kettle® grills *Sold as an Individual 

Marine Kettle® Charcoal Grill - 17" Our time tested original charcoal Marine Kettle® grill now has a hinged lid.  Made in the U.S.A., it is meticulously crafted of 100% 18-8 mirror polished stainless steel for maximum corrosion resistance.  Our rotating design allows you to determine which direction you would like the lid to open when grilling in windy conditions.  You obtain perfect results through use of the adjustable height cooking grill and the variable temperature control draft door assembly.  Our Marine Kettle® design allows oven type baking to enhance the grill flavor while retaining the natural juices of the food.  It will cook more food faster, on less grill area, than any other charcoal grill.  Safety and efficiency are obtained by closing the draft door and extinguishing the coals for future use.  Magma’s large selection of mounting options and accessories allows you to customize your grill for your specific on-board or on-shore application.   *Mount not included.  Features: Heat resistant "Stay Cool" plastic handle with air cooled supports Perfectly balanced hinged lid, won't slam shut Adjustable height cooking grill and variable draft door assembly, for superior temperature control Lower charcoal grate and sealed ash compartment Technical Specifications: Material - 18-8 mirror polished marine grade Stainless Steel Mounting Application - Marine Kettle® Mounts Primary Cooking Grate - 17" (38.1 cm)  Total Cooking Area - 227" Sq. In. (1464.5 sq. cm) Dimensions w/valve attached and lid/legs closed (L x W x H) - 17-1/8" x 17-3/4" x 12-1/8" (43.5 x  45.1 x 30.8 cm) Weight - 9.76 lb (3.6 kg) Fuel Type - Charcoal *Sold as an Individual

Marine Kettle® Charcoal Grill - 15" Our time tested original charcoal Marine Kettle® grill now has a hinged lid.  Made in the U.S.A., it is meticulously crafted of 100% 18-8 mirror polished stainless steel for maximum corrosion resistance.  Our rotating design allows you to determine which direction you would like the lid to open when grilling in windy conditions.  You obtain perfect results through use of the adjustable height cooking grill and the variable temperature control draft door assembly.  Our Marine Kettle® design allows oven type baking to enhance the grill flavor while retaining the natural juices of the food.  It will cook more food faster, on less grill area, than any other charcoal grill.  Safety and efficiency are obtained by closing the draft door and extinguishing the coals for future use.  Magma’s large selection of mounting options and accessories allows you to customize your grill for your specific on-board or on-shore application.   *Mount not included.  Features: Heat resistant "Stay Cool" plastic handle with air cooled supports Perfectly balanced hinged lid, won't slam shut Adjustable height cooking grill and variable draft door assembly, for superior temperature control Lower charcoal grate and sealed ash compartment Technical Specifications: Material - 18-8 mirror polished marine grade Stainless Steel Mounting Application - Marine Kettle® Mounts Primary Cooking Grate - 15" (38.1 cm)  Total Cooking Area - 177" Sq. In. (1141.9 sq. cm) Dimensions w/valve attached and lid/legs closed (L x W x H) - 14-7/8" x 14-7/8" x 11" (37.8 x  37.8 x 27.9 cm) Weight - 7.92 lb (3.6 kg) Fuel Type - Charcoal *Sold as an Individual

Kettle® Grill Cover & Tote Bag - 17"- Pacific Blue  These grill covers are designed specifically to fit the 15" Magma Marine Kettle® grill.  The convenient draw string and cam lock assembly keep it secured while underway or in windy conditions.  Constructed from breathable solution dyed acrylic fabric that is water and fade resistant.  The material is guaranteed with a 5 year warranty that covers the fabric from becoming unserviceable because of loss of color or strength from normal exposure conditions, including sunlight, mildew, rot, and atmospheric chemicals.   *Sold as an Individual 

Kettle® Grill Cover & Tote Bag - 15"- Pacific Blue  These grill covers are designed specifically to fit the 15" Magma Marine Kettle® grill.  The convenient draw string and cam lock assembly keep it secured while underway or in windy conditions.  Constructed from breathable solution dyed acrylic fabric that is water and fade resistant.  The material is guaranteed with a 5 year warranty that covers the fabric from becoming unserviceable because of loss of color or strength from normal exposure conditions, including sunlight, mildew, rot, and atmospheric chemicals.   *Sold as an Individual 

Kettle® Grill Cover & Tote Bag - 15"- Jet Black These grill covers are designed specifically to fit the 15" Magma Marine Kettle® grill.  The convenient draw string and cam lock assembly keep it secured while underway or in windy conditions.  Constructed from breathable solution dyed acrylic fabric that is water and fade resistant.  The material is guaranteed with a 5 year warranty that covers the fabric from becoming unserviceable because of loss of color or strength from normal exposure conditions, including sunlight, mildew, rot, and atmospheric chemicals.   *Sold as an Individual