Soft Grip 13" Steering Wheel This is the ideal steering wheel for bass boats, sport boats, and runabouts. The steering wheel has a patented design that provides a comfortable and firm grip. Also, this steering wheel has contemporary styling with a soft, black PVC outer rim and a high-impact, one-piece plastic inner core. It fits all standard 3/4-inch tapered shafts and conforms to ABYC P-22 and ISO 8848. Features: Resists UV rays to prevent fading Soft Grip is non-magnetic, so it will not interfere with compass readings 3-3/8 inch deep dish 8315 NMMA “As Approved”: 090071; CE Certificate WATT004 Specifications: Center Cap: Black plastic

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Power Grip Carbon Fiber Wheel Lewmar has upped the steering wheel game. The Power Grip steering wheel gives boaters precision handling with the 3-spoke design. The wheel’s underside is designed with finger grips for even more control and comfort. Each Lewmar steering wheel has a pre-installed Power-Grip knob. Features: High-strength and low-weight carbon fiber High-gloss UV-resistant lacquered finish Rear face EVA molded insert grips Deep dish design for extra room and comfort Non-magnetic Center hub insert machined from solid billet 316 stainless steel Pre-assembled with ball-raced Power Grip for ease of use Rim diameter (inch): 13-1/2” Hole diameter (inch): 3/4" taper Dish: 22 degrees (13-1/2")

13" SS ComfortGrip PowerWheel Steering Wheel - Polished - Fits 3/4" Tapered Shaft The perfect combination of durability, good looks and soft feel!  Edson’s ComfortGrip PowerWheels feature a unique rubber finger grip insert that provides precise control and ultimate comfort.  And with the optional Pro-Series or ComfortGrip PowerKnob, you also get the ultimate in control. Includes Stainless Wheel Nut with inserts for 12mm & 5/8”-18 threads  Features: 13" Diameter ComfortGrip padding Solid cast 316 stainless construction. Polished Stainless Steel Finish. Includes 316 1" Stainless Wheel Nut with insert for 12mm and 5/8”-18 threads.

Carbon Fiber Primus Steering Wheel with Santoprene Finger Grip - 13.5" Diameter - 3/4" Tapered Shaft with Carbon Fiber Nut For all the hours dedicated sports fishermen spend at the helm, the savvy ones know how to do it in comfort and style. The Schmitt Marine Primus Carbon Fiber delivers all the performance, reliability, and looks discerning owners expect from a luxury-grade carbon fiber steering wheel at a smart price point. The sleek, modern beauty of this 13-1/2″ steering wheel belies its rugged construction. Its dynamic 3-spoke design incorporates carbon fiber throughout for a seamless stylized look that exudes gritty sophistication. The Primus CF’s 1-1/8″ diameter ring, along with its UV-resistant black Santoprene rubber finger grip and rim grip, help reduce hand fatigue for secure, all-weather comfort during long runs offshore. For those wanting the occasional faster wheel spin with one-handed maneuvering, the Schmitt Marine Primus CF carbon fiber steering wheel comes in a control knob model. Glass ball bearings in the knob deliver optimum performance and responsiveness. Features: Control knob for faster wheel spin with one-handed maneuvering NMMA Type accepted, meeting ABYC standards, and CE certified Its carbon fiber construction is overlaid on a fiberglass backbone, which helps disperse energy from forceful impacts Specifications: Wheel Diameter: 13.5 in. Carbon Encased Stainless Steel Center Nut: 5/8 in.

Evo Pro 316 Cast Stainless Steel Steering Wheel with Control Knob - 13.5" Diameter  Boat owners shouldn't have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless steel center spoke, ergonomic polyurethane grip, and control knob, Schmitt Marine's Model 724 Evo Pro wheel provides the best of both worlds. Combining solid value with a luxurious appearance, the Evo Pro offers features owners expect in more expensive wheels. Cast 316 stainless steel construction ensures strength and durability. Molded to simulate fine hand-stitched leather, the poly grip contributes a plush look as well as optimal ease and handling. Its contrasting combination of materials gives the Evo Pro a smart, sporty look, with a black hand grip, center cap, and control knob setting off the high polish of the stainless steel. The control knob itself eliminates the need for hand-over-hand steering, allowing greater precision and control. Easy to mount, the Evo Pro has a 3/4" tapered shaft and has 13-1/2" wheel diameter. Schmitt Marine thoroughly tests each of its stainless steel wheels and offers a lifetime warranty.

Evo Pro 316 Cast Stainless Steel Steering Wheel - 13.5" Diameter  Boat owners shouldn't have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless steel center spoke and ergonomic polyurethane grip, Schmitt Marine's Model 724 Evo Pro wheel provides the best of both worlds. Combining solid value with a luxurious appearance, the Evo Pro offers features owners expect in more expensive wheels. Cast 316 stainless steel construction ensures strength and durability. Molded to simulate fine hand-stitched leather, the poly grip contributes a plush look as well as optimal ease and handling. Its contrasting combination of materials gives the Evo Pro a smart, sporty look, with a black hand grip and center cap setting off the high polish of the stainless steel. Easy to mount, the Evo Pro has a 3/4" tapered shaft and has a diameter of 13-1/2". Schmitt Marine thoroughly tests each of its stainless steel wheels and offers a lifetime warranty.

Vision FX Model 714 - 13.5" Wheel With Knob & Finger Grip - 3/4" Tapered Shaft With Faux Nut - 1/2" & 3/4" Adapters The Vision FX Wheel is a 3 spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a knob/finger grip, and a fitted centered faux nut. Features: The wheel is made of 316 cast stainless steel, which is proven to be durable and long-lasting Standard polished rim, that gives the wheel a glossy look Stainless steel finger grip rim Includes center faux nut  1/2" & 3/4" adapters for different helm sizes  Lifetime warranty Specifications: Rim diameter: (inch) 13 1/2" Hole diameter: (inch) 3/4" tapered shaft  3 spokes  *Packaged in a retail box

Primus Model 740 - 13.5" Wheel With Knob & Finger Grip - 3/4" Tapered Shaft With Faux Nut - 1/2" & 3/4" Adapters The Primus Wheel is a 3 spoke stainless steel steering wheel that can be a great addition to any boat. This specific steering wheel comes with a Santoprene finger/rim grip, spoke inserts, and a fitted centered faux nut. Features: The wheel is made of polished 316 cast stainless steel, which is proven to be durable and long-lasting Santoprene finger grip, Santoprene rim grip, and Santoprene spoke inserts Includes center faux nut  1/2" & 3/4" adapters for different helm sizes  Lifetime warranty Specifications: Rim diameter: (inch) 13 1/2" Hole diameter: (inch) 3/4" tapered shaft  3 spokes  *Packaged in a retail box

3 Spoke 13.5" Steering Wheel with Power-Grip Knob Lewmar’s steering systems have been world leaders for over 50 years and constantly evolving to meet the performance and aesthetic needs of both cruisers and elite racers.  Each product is thoroughly tested in the most adverse conditions possible and then finished with care to suit every type of yacht. Features: Power-Grip knob Ergonomic design  Technical Specifications: Material - Stainless Steel Diameter - 13.5" Hub Thread - 5/8" Spokes - Three (3) In the Box: Steering wheel with knob Instruction manual *Sold as an Individual

Evo Pro 316 Cast Stainless Steel Steering Wheel with Control Knob - 15.5" Diameter  Boat owners shouldn't have to sacrifice comfort for elegant styling in a steering wheel. With a gleaming stainless steel center spoke, ergonomic polyurethane grip, and control knob, Schmitt Marine's Model 724 Evo Pro wheel provides the best of both worlds. Combining solid value with a luxurious appearance, the Evo Pro offers features owners expect in more expensive wheels. Cast 316 stainless steel construction ensures strength and durability. Molded to simulate fine hand-stitched leather, the poly grip contributes a plush look as well as optimal ease and handling. Its contrasting combination of materials gives the Evo Pro a smart, sporty look, with a black hand grip, center cap, and control knob setting off the high polish of the stainless steel. The control knob itself eliminates the need for hand-over-hand steering, allowing greater precision and control. Easy to mount, the Evo Pro has a 3/4" tapered shaft and has 15-1/2" wheel diameter. Schmitt Marine thoroughly tests each of its stainless steel wheels and offers a lifetime warranty.

16" Stainless Steel Comfort Grip Steering Wheel - 3/4" - Tapered Shaft Edson's ComfortGrip Power Wheels feature an ergonomically-designed rubber finger grip insert that provides precise control and exceptional comfort.

Nisida Steering Wheel 13.8" - Black Polyurethane Grip with Black Aluminum Spokes Features: Standard 3/4″ Taper X63 – 40119D Hub with Button (To Be Ordered Separately) Hub and Center Cap Included Meet with the EN 28848 and ABYC P22 Standards Specifications: Dimensions: 13.8" Hub Included Steering Wheel Dish: 3.35"

Morosini 13.8" Steering Wheel - Black Polyurethane with Stainless Steel Spokes & Chrome Hub Features: Standard 3/4″ Taper Hub Included Meet with the EN 28848 and ABYC P22 Standards Ø 13.8” (350 mm) Grip: Polyurethane Spokes: 304 Stainless Steel Hub: Chrome Colors: Black Specifications: Dimensions: 13.8" Hub Included Steering Wheel Dish: 3.66"

V27 13.8" Steering Wheel - Stainless Steel Grip & Spokes Features: Standard 3/4" taper Hub included Meets with the EN 28848 and ABYC P22 standards Specifications: Dimensions: 13.8" 3 Spokes Stainless Steel Grip Stainless Steel Spokes