|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate - Black
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
465.60 |
|
|
Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
513.60 |
|
|
Starlink High Performance 24" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
609.60 |
|
|
Starlink High Performance 36" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
710.40 |
|
|
Starlink High-Performance Flat Dish Mounting Plate
Edson's Starlink mounting plate allows you to mount a High-Performance Flat Dish to our Vision Series mounts. Choose the Starlink plate as "Step 2" in our 3-step Vision Series system and you're on your way.
Powder-coated white matches the Vision Series line, including mounting hardware and Tef-Gel thread protectant.
*For High-Performance Flat Dish mounting only.
**For Dish pole mounting, please see Edson part # 68881
|
130.36 |
|
|
5" Aft Leaning Mount with ADAR1 Top Plate
This Seaview Modular Radar Mount works with 18" - 24" closed dome radars. The modular design allows you to add various accessories and different top plates at any point, thus making it a cost-effective choice.
Included ADAR1 Top Plate
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
|
374.40 |
|
|
14" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 16' to 32'
Length of Tab: 14"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1511.23 |
|
|
18" x 12" High Performance Trim Tab Kit w/o Switch Kit-12V - Single Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
2 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 20' to 40'
Length of Tab: 18"
Width of Tab: 12"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 10222-211D, 15069-001
or 15070-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1575.28 |
|
|
21" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 24' to 42'
Length of Tab: 21"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2216.93 |
|
|
25" x 14" High Performance Trim Tab Kit w/o Switch Kit-12V - Dual Actuator
Lenco HP Single & Dual Actuator Electric Trim Tab Kits feature electro-polished 7 Gauge 304SS Blades & Sacrificial Anodes. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections.
Each kit is factory assembled with extreme duty actuators with 3/8" SS bolts, a full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
Kit Contents:
2 each of stainless steel trim tab planes
4 each of #15056-001 XD extreme duty actuators with 6' lead & Deutsch plugs
Kit is factory assembled with full transom back plate, mechanical strain relief cable seal, adjustable C-channel mounting brackets, and 3.75" sacrificial anodes.
The following to be supplied by customer:
Boat mounting hardware supplied by customer
Actuator extension harnesses (2 for single actuator application or 4 for dual) will be
required. To order the lengths of your choice see the Lenco Accessories Section.
Specifications:
Suggested Boat Length: 28' to 46'
Length of Tab: 25"
Width of Tab: 14"
Minimum Transom Height: 10.5"
Blades: 7 Gauge Stainless Steel
Finish: Electro-Polished
Switch Kit: Sold Separately
Switch Required: 15071-001
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
2541.64 |
|
|
1.5" Ball Mount w/2.5" Round Base, Short Arm & 1.5" x 3" Plate f/Humminbird Helix 5 Only
The RAM-202-153-B-202U consists of a round 2.5" diameter round base (Universal AMPs Hole Pattern), short double socket arm and 1.5" x 3" rectangular base. The rectangular base contains four holes with a center to center pattern of 1" x 2.5". For most applications, mount will support up to ten pounds.
Features:
Compatible Devices: Humminbird Helix 5
Center to Center Hole Pattern: 1" x 2.5"
Weight Capacity: 10 lbs.
Overall Height: 5.225"
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag. Hardware for mounting to device not included with purchase.
Weight: 0.19 lbs.
|
44.88 |
|
|
RAM 1.5" Rail Mount w/Double U-Bolt Base & 3.625" Square Base (VESA 75mm x 75mm Hole Pattern)
The RAM-334U consists of a double socket arm, 3.625" square plate with a 75mm X 75mm VESA hole pattern and stainless steel double u-bolt base that will fit pipes from 1" to 1.25" in diameter. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
Material:
Powder Coated Marine Grade Aluminum
U-Bolt Dimensions:
Accommodates rails from 1" to 1.25" in diameter.
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
60.16 |
|
|
Starlink Flat Panel Kit with 10" Seaview Pedestal Mount & ADASTLKA Starlink Top Plate
The Power and Reliability of KVH the Speed of Starlink
Keep your family, friends, and crew connected when you turn to KVH for a Starlink high-performance terminal, as a standalone solution, or as part of a comprehensive hardware and service solution. Enjoy seamless, intelligent integration of Starlink’s speed and affordability (where available) with KVH’s white glove service, proven global HTS network, multi-channel hybrid connections, and outstanding performance.
Add a Starlink flat panel high-performance terminal to your yacht’s TracNet solution with our simple, single-cable installation and exclusive intelligent hybrid switching to ensure you enjoy the best and fastest communications at all times. For existing TracPhone® terminal users, an easy configuration update and single cable enables automatic switching between KVH’s global HTS network and Starlink for seamless connectivity.
Turn to KVH as your single source for a complete Starlink solution. Enjoy same-day shipping, unmatched customer satisfaction, and 24/7/365 live warranty support and global service through KVH's OneCare Global Support Program. Plus you can activate your Starlink through KVH when it's right for you.
Enhance your onboard communications with fast speeds, affordable data, and KVH's advanced, integrated services for enhanced security, connectivity, and versatility.
Starlink Available as a Standalone Solution or a Supplement to KVH’s Award-winning Connectivity Solutions
Starlink flat panel high-performance terminal and service with high-speed, low-latency Internet
Choice of KVH TracNet™ hybrid terminal with integrated global VSAT, 5G/LTE cellular, and shore-based Wi-Fi bridge, or TracPhone VSAT terminals
KVH ONE™ global hybrid network
Rely on the Speed of Starlink and the Support of KVH
Bringing connectivity to your customers has never been so easy.
Enhance your onboard communication offerings with Starlink and KVH, the world leader in marine connectivity.
Unmatched customer satisfaction with easy activation through KVH
When you order Starlink from KVH, customers are activated when it's right for them (unlike other Starlink suppliers, who start billing for monthly service after shipping).
KVH offers live 24/7/365 Starlink activation service plus plan change and service pause requests!
Rapid activation and no delays mean your customers are always connected while onboard.
Superior performance with KVH connectivity and intelligent hybrid switching
For yacht owners who want the most reliable, versatile connectivity solution afloat, we can help you offer:
Seamless, intelligent integration of Starlink’s speed and affordability with:
KVH’s proven global HTS network
Multi-channel connections
Network management devices
NMEA award-winning TracNet hybrid antennas with VSAT, 5G/LTE, and Wi-Fi all under one dome
Features:
Ultra high-speed data rates (as fast as 350 Mbps down)
Ultra-affordable data (as low as $1.00 per GB)
“Best effort” low latency LEO network
End-to-end data encryption
Fully deployed global satellite network
|
3556.29 |
|