|
Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts - Black
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss Cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Water-tight gasket in the center of the plate to pass the Starlink cable
Predrilled and all hardware needed to mount the Starlink is included
*Not light bar compatible
|
163.20 |
|
|
Starlink Maritime Top Plate for Seaview M1 & M2 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Starlink Wedge Base hole pattern pre-dimpled in this modular top plate
Water-tight gasket in the center of the plate to pass the Starlink cable
The 1” thick starboard plate can accommodate a Seaview light bar
|
168.00 |
|
|
Starlink Maritime Top Plate for Seaview M1 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Water-tight gasket in the center of the plate to pass the Starlink cable
Predrilled and all hardware needed to mount the Starlink is included
*Not light bar compatible
|
163.20 |
|
|
WD-OPNARY-01 Top Plate for PowerTower® Open Array Mounts - 4°
Enhance the performance of your radome with our tough, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.
Mounts between PowerTower® mount and base of open array radar.
Compatible with:
Furuno - 1762, 1932, 1934, 1942, 1944, 1954, 851, DRS12A (6'), DRS12A (4'), DRS25A (4'), DRS25A (6'), DRS4A, DRS6A / DRS6A X CLASS, DRS6A-NXT radars
Garmin - GMR Fantom 254, 256, 54, 4, 6, GMR™ 1224 xHD2, 1226 xHD2, 2524 xHD2, 2526 xHD2, GMR™ 404, 406, GMR™ 424 xHD2, GMR™ 624 xHDS2, GMR™ 626 xHD2 radars
Navman - 8000 Series (8084/8120) 4' radars
Nobeltec - 4kW / 6kW radars
Raymarine - 5S / 9S / RA1048HD / RA1048SHD, 7S / 11S / RA1072HD / RA1072SHD, Cyclone 3', 4', 6', Magnum 4ft 4kW/12kW, Magnum 6ft 4kW/12kW radars
Features:
Enhance the performance of your open array with the Universal Scanstrut 4° radar base wedge
4° Base Wedge for mounting under PowerTower®
A tough, marine-grade, UV stable wedge
Compatible with radomes from most radar manufacturers
Technical Specifications:
Material - Marine Grade Polymer
Dimensions (L x W ) - 9.69" x 9.69"
Angle - 4°
In the Box:
Wedge
Base seal
Instruction manual
*Sold as an Individual
|
134.33 |
|
|
Starlink Maritime Black Top Plate for Seaview M1 & M2 Style Modular Mounts
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "Swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Features:
Starlink Wedge Base hole pattern pre-dimpled in this modular top plate
Water-tight gasket in the center of the plate to pass the Starlink cable
The 1” thick starboard plate can accommodate a Seaview light bar
|
168.00 |
|
|
ADAF3 Modular Top Plate for FLIR M300 Series Thermal Cameras f/Mounts Ending in M1 or M2
Seaview Modular Top Plates are designed to be mounted onto Seaview Modular Mounts. These Top Plates eliminate the "swiss cheese" look of most other radar and satdome mounts. With Seaview Top Plates the result is only four visible mounting screws to secure electronics.
Unique Design
No longer the unwanted “swiss cheese” look with a Seaview modular top plate. These plates result in only 4 visible mounting screws to secure electronics. A anodized 1/4" thick aluminum plate is pre-drilled to fit most marine electronics. This aluminum plate is then encased in a UV stable glass filled ABS white plastic. Each top plate is dimpled to match the provided drill templates for easy and precise drilling for your specific marine electronics.
Note: This only applies to the ADA-R1, ADA-S1 & ADA-S2 Top Plates
King Starboard
The ADA-R2, ADA-S3, ADA-S4 & ADA-F1 Top Plates are made of King Starboard. It comes pre-marked and supplied with a drill template. The end result is a clean looking installation.
|
192.00 |
|
|
WD-RAD-01 Top Plate f/PowerTower® Radar Mounts - 4°
Enhance the performance of your radome with the rugged, marine-grade, UV stable wedge that angles the radar down 4° below horizontal to provide a level horizon for your radar when the boat is underway.
Mounts between PowerTower® mount and base of radar.
Compatible with:
Garmin - Fantom 18, 24, GMR18HD / 18xHD / 18HD+, GMR24HD / 24xHD, GMR40 radars
Humminbird - AS 21RD4KW, HB 2124 CHIRP radars
Lowrance - HALO20, HALO20+, HALO24, LRA-1800 / RB714A / DX42, LRA-2400 HD radars
Raymarine - QUANTUM (Q24C), QUANTUM 2 (Q24D), RD218, RD418/RD418HD, RD424/RD424HD radars
Simrad - DX45, DX60 / DX64-S, GB40 / NX40/45 / NSE8/12, GB40 / NX40/45 / NSE8/12 / RB712A / DX42S, GB40 / NX40/45 / NSE8/12 DX64S radars
Sitex - MDS-12 radar
Features:
Enhance the performance of your radome with the Universal Scanstrut 4° radar base wedge
4° Base Wedge for mounting under PowerTower®
A rugged, marine-grade, UV stable wedge
Compatible with radomes from most radar manufacturers
Technical Specifications:
Material - Marine Grade Polymer
Dimensions (L x W ) - 11.10" x 9.09"
Angle - 4°
In the Box:
Wedge
Base seal
Instruction manual
*Sold as an Individual
|
134.33 |
|
|
ROKK Midi Top Plate f/Garmin and Raymarine
A multi-position, fully adjustable mount for small electronic devices. Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations.
The RL-502 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features.
Features:
Engineered to withstand high shock loading.
Device-specific top plate
Technical Specifications:
Material - ASA Plastic
Dimensions (diameter) - 2.11" (53.8 mm)
Compatible with the following products
*Sold as an Individual
|
14.11 |
|
|
ROKK Midi Top Plate f/Raymarine, Lowrance and B & G
A multi-position, fully adjustable mount for small electronic devices. Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations.
The RL-504 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features.
Features:
Engineered to withstand high shock loading.
Device-specific top plate
Technical Specifications:
Material - ASA Plastic
Dimensions (L x W) - 5.67" x 2.43" (144 x 61.75 mm)
Compatible with the following products
*Sold as an Individual
|
14.11 |
|
|
ROKK Midi Top Plate f/Humminbird and Raymarine
A multi-position, fully adjustable mount for small electronic devices. Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations.
The RL-506 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features.
Features:
Engineered to withstand high shock loading.
Device-specific top plate
Technical Specifications:
Material - ASA Plastic
Dimensions (L x W) - 5.35" x 1.89" (136 x 48 mm)
Compatible with the following products
*Sold as an Individual
|
14.11 |
|
|
ROKK Midi Top Plate f/Garmin, Simrad and B & G
A multi-position, fully adjustable mount for small electronic devices. Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations.
The RL-507 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features.
Features:
Engineered to withstand high shock loading.
Device-specific top plate
Technical Specifications:
Material - ASA Plastic
Dimensions (L x W) - 6.61" x 2.59" (168 x 65.7 mm)
Compatible with the following products
*Sold as an Individual
|
14.11 |
|
|
TP325 Top Plate f/Converting Merriman/Yacht Specialties Steering Systems to 12" Wide 1.25" Diameter AngelGuard
12" Top Plates are used for upgrading from an existing 1" diameter pedestal guard to a 1.25" StraightGuard or AngleGuard. Specifically designed for Converting Merriman or Yacht Specialties steering systems.
12" Top Plates Include:
316 Stainless Steel
Mirror Polished Finish
Precision Laser Cut
|
191.99 |
|
|
Starlink High Performance 5" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
403.20 |
|
|
Starlink High Performance 10" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high-performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
465.60 |
|
|
Starlink High Performance 16" Pedestal Mount with ADASTLKA Starlink Top Plate
Seaview offers 5", 10", 16", 24" & 36" tall pedestals for Starlink's high-performance terminals, such as Maritime and In-Motion RV.
Pair your Seaview pedestal mount with the new Starlink-compatible top plate (ADASTLKA) for a clean and sleek installation of your Starlink high performance terminal.
Features:
Powder-coated aluminum pedestal mount.
The top of the pedestal has a modular top that can fit the Starlink wedge base.
*The ADASTLKA top plate cannot support a light bar
|
513.60 |
|