Tapered Mast for Garmin/Raymarine/Navico Domes & Starlink This remake of Scanstrut's classic tapered mast mount has been designed to provide optimal ease of installation while creating a robust and aesthetically pleasing mount adaptable to multiple different technologies on one mounting platform. Now made easier to install, the PTM-R1-SL features access panels under each "wing" to allow for easy access and quick and simple cable routing. The design also focuses on ensuring that NMEA connectors fit within the mast and the wings, eliminating the need to remove the connectors for installation. This mast is suitable for mounting radar, lights, Satcom, Starlink, GPS/VHF antennas, and cameras seamlessly together. Features: Mount Radar, thermal camera, aerials, and Starlink high-performance in one installation  Constructed from marine-grade aluminum Paint finishes comply with Scanstrut's unique 4-step marine paint system Access panels are on the underside of the wings for ease of wiring Watertight installation Pre-drilled mounting holes allow the radar to fasten straight to the mast with its own mounting bolts

Tapered Mast for Furuno Radar Dome & Starlink This remake of Scanstrut's classic tapered mast mount has been designed to provide optimal ease of installation while creating a robust and aesthetically pleasing mount adaptable to multiple different technologies on one mounting platform. Now made easier to install, the PTM-R2-SL features access panels under each "wing" to allow for easy access and quick and simple cable routing. The design also focuses on ensuring that NMEA connectors fit within the mast and the wings, eliminating the need to remove the connectors for installation. This mast is suitable for mounting radar, lights, Satcom, Starlink, GPS/VHF antennas, and cameras seamlessly together. Features: Mount Radar, thermal camera, aerials, and Starlink high-performance in one installation  Constructed from marine-grade aluminum Paint finishes comply with Scanstrut's unique 4-step marine paint system Access panels are on the underside of the wings for ease of wiring Watertight installation Pre-drilled mounting holes allow the radar to fasten straight to the mast with its mounting bolts

5" Stainless Steel Power Mount - 7" x 7" Base - f/Garmin/Raymarine 3G/4G Radar Includes ADA-R1 modular top plate. Seaview Stainless Steel Radar Mounts are 5" tall and aft leaning. The 7" x 7" base plate utilizes a small footprint, great for installations where space is limited. The body is made out of 316 stainless steel. This Seaview stainless steel mount is also light bar compatible with Seaview stainless steel light bars. The stainless steel light bars come pre-wired and are USCG approved for boats up to 20 meters (65.6 ft.) in length. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Tapered Radar Mast Single combintation mount for radar, lights, GPS/VHF antennas, cameras or search lights, with each item perfectly positioned for maximum performance. Undrilled top plate to fit any light For use with Raymarine, Garmin, and Navico BR24, 3G, 4G radar domes Install up to 4 GPS/VHF antenna Hollow wings and stem allow hidden cabling Compatible with all current 18" and 24" radomes(except furuno) Small base footprint (same as Dual PowerTower) Removable 'wings' for safe low cost shipping

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Scanpod Mast Mount - 3 Instruments Scanstrut Scanpod Mast Pods allow installation of instruments at the mast. Whether racing or cruising, Mast Pods give you the best view of your instruments. Features: Universal Mount-designed to fit multiple mast sizes Mast arms pivot about semicircular washers, an additional cross-brace provides stiffness preventing sideways movement The pod seal is manufactured from a high strength silicone, it has a very high resistance to heat and UV so you can be sure it will stand the test of time Specifications: Uncut Useable Face: 14.5H" x 4.65W" Overall Dimensions: 17.0"W x 7.1H" Mast Arm: Length: 7.3", Width on lower end 8.3", Max opening 8.1" Fits mast sizes from 3" to 8.8"

Central Lightbar for Up to 45cm Domes The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom and camera to be mounted together in one single space-saving modular installation.  Features: Central Lightbar for use with up to 45cm Domes Compatible Devices: Hella NaviLED Pro Hella 2984 Series Aquasignal Series 40 Aquasignal Series 25 Perko 0200 Tri-Color/ White All Round Navigation Light Perko 0455 and 0406 Lopolight

ROKK Midi Top Plate f/Garmin and Raymarine  A multi-position, fully adjustable mount for small electronic devices.  Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations. The RL-502 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features. Features: Engineered to withstand high shock loading. Device-specific top plate Technical Specifications: Material - ASA Plastic Dimensions (diameter) -  2.11" (53.8 mm) Compatible with the following products *Sold as an Individual

ROKK Midi Top Plate f/Garmin, Simrad and B & G A multi-position, fully adjustable mount for small electronic devices.  Install fish finders, chartplotters and other electronics on the dashboard, navigation station and various other desired locations. The RL-507 is one (1) part of a system based around 4 different heavy-duty anodized aluminum mounts that allow your device to attach to the ROKK Midi to unlock its incredible features. Features: Engineered to withstand high shock loading. Device-specific top plate Technical Specifications: Material - ASA Plastic Dimensions (L x W) -  6.61" x 2.59" (168 x 65.7 mm) Compatible with the following products *Sold as an Individual

PP5050-19 PowerPod Pre-Cut f/Garmin GPSMAP 7410, 7410xsv, 7610 & 7610xsv PowerPods are designed for the serious boater who is blasting offshore with his open Center Console. He demands the most from his boat and his electronics. He needs a tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions. Sturdy and secure, yet clean and attractive, PowerPods are better than bracket mounting. Concealing wires, securing electronics, PowerPods provide the clean look of flush mounting with the advantages of a swivel base. Features: NavPod PP5050-19 PowerPod is Pre-Cut for Garmin GPSMAP 7410, 7410xsv, 7610, 7610xsv Tough and rugged mount to protect vital electronics from the harshest of offshore boating conditions NavPods have a high gloss finish, giving you a clean mounting solution while concealing unsightly wires Designed with a double gasket waterproof seal, NavPods protect your electronics from the harshest of wet offshore boating conditions

Vehicle Suction Cup Mount f/Garmin DriveAssist™ Access your compatible Garmin DriveAssist while navigating in your vehicle with this adjustable mount. Simply suction your mount to the windshield or any smooth, flat surface for easy viewing. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PP5200-12 PowerPod Pre-Cut f/Garmin 7412, 7412xsv, 7612 & 7612xsv PP5200 Series, PowerPods for Power are a better option than bracket mounting. PowerPods provide a clean look for flush mounting with the advantage of a swivel base. The trunion bracket that is supplied with most electronics is not optimal. PowerPods have the advantage of protecting the back of the electronics from harsh saltwater spray. Most manufacturers do an excellent job of protecting the face of the display from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They are expecting you to flush mount it into the console or a NavPod. The PowerPod also protects the plastic connectors and wires from deterioration caused by long term exposure to UV. PowerPods for Sail are for mounting on a flat surface. Perhaps under the dodger or aft end of the cockpit table especially on boats with dual wheels.

GP1800-20 SailPod Pre-Cut f/Garmin 7408 / 7408xsv / 7608 / 7608xsv f/9.5" Wide Guard GP1800 Series for 9.5" Guard, SailPods are for mounting a single radar or chartplotter at the helm where you can easily operate and clearly see the fine details of the screen. A single SailPod is best mounted on a Single Bend AngleGuards or use a Double Bend AngleGuards to fit an InstrumentPod on the top vertical section and SailPod below on the angled section. SailPod for Power are for mounting on a SK135 Stachion Kit can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion Kits can also be used with a SailPod for overhead mounting applications. SailPod Pre-Cut For: Garmin GPSMAP® 7408/7408xsv Garmin GPSMAP® 7608/7608xsv GP1800 Series Sizing Chart: Height: Overall 9.8", Usable Face 8", Max Cutout 7.5" Width: Overall 13", Usable Face 11.125", Max Cutout 10.625" Depth: Overall 5.5", Usable Face 4.375"

GP1040-20 SystemPod Pre-Cut f/Garmin 7408/7408XSV & One Instrument f/9.5" Wide Guard NavPod GP1040 Series for 9.5" Guard SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic. A SystemPod is best mounted on a Single Bend AngleGuards. The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods. *See Literature tab for an image with dimensions

RMX4800-20 RailMount Pre-Cut f/Garmin GPSMAP® 7408 / 7408xsv / 7608 / 7608sxv RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard. All RailMount NavPods Include: Acrylic capped ABS plastic Chromed stainless steel tamper-proof fasteners Double Seal for watertight integrity Models are available pre-cut for popular electronics. Chromed stainless steel arm with swivel mount Two sets of adaptors included for 1" or 1.25" diameter tubing The Hi-Gloss Material NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and 1provides for better structural rigidity. The Waterproof Seal All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics. The Nickel Chrome Plated Screws We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling! The Manufacturing Process Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We have re-designed and re-tooled all of the popular NavPods. We have reviewed all of the former products and selected the best design elements of each and incorporated them in every new Gen3 product. Our Commitment to Quality We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.