|
King Pin Power Rise Pedestal - Adjusts 16" to 22-3/8"
This air-powered pedestal is adjustable from 16" to 22-3/8" in height.
Features:
360° rotation
Brushed aluminum post
Fits most standard King Pin base plates
A standard 5-1/4" hole pattern fits virtually all marine seat brands
Class B certified per ABYC standards
|
114.13 |
|
|
King Pin Power Rise Pedestal - Adjusts 22.56" to 29.5"
This air-powered pedestal is adjustable from 22.5" to 29.5" in height.
Features:
360° rotation
Brushed aluminum post
Fits most standard King Pin in base plates
A standard 5-1/4" hole pattern fits virtually all marine seat brands
Class B certified per ABYC standards
|
125.04 |
|
|
KingPin™ Power-Rise Sit-Down Post Threaded Pin - 1-Pack
Features:
Adjustable Height To Be Used As A Seat Or Leaning Post
Rotates 360°, Adjusts From 16″ To 22-3/8″
Use With Threaded KingPin™ Base (sold separately)
Rated ABYC Class H-31 B (Fishing Only)
|
110.84 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0300
|
227.18 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
|
205.73 |
|
|
Taper-Lock™ Manual Adjust Post - 13" to 16" for 2-3/8"
2-Piece Manual Adjustable Set Includes:
2-3/8″ Manual Adjustable Post With Posi-Lock System
Trac-Lock™ Non-Locking Swivel (3100031-1)
Use With Any Taper-Lock™ Base (sold separately)
Rated ABYC Class H-31 B (Fishing Only)
|
84.41 |
|
|
MAGNUS Escape Hatch - OD 22-3/16" x 22-3/16"
Heavy Duty Ocean Hatch
MAGNUS is a complete range of extra heavy-duty hatches. They are CE-classified AI, which means to say that they are designed for ocean use and can be fitted in any part of the hull or deck.
These hatches are provided with friction hinges, which will keep the hatch open in any position, without the need for stays. The hatch can be opened through 180° and there are virtually no obstructions in the hatch opening. Like other VETUS hatches, the MAGNUS range can be opened from inside or outside the boat. They can also be left locked; either completely watertight or in a ventilation position.
The frame profile is hand-polished and anodized. The acrylic has a thickness of 10 mm and the color is “dark smoke”.
The build-in dimensions (the cut-out sizes) of the Magnus hatches are in conformity which those that are current in the market.
Features:
External Dimensions - 22 3/16" x 22 3/16"
Cut Out Dimensions - 19 15/16" x 19 15/16"
Number of Handles - 4
*VETUS strongly advises against using MAGNUS hatches as an A1 escape hatch in the underside of a multihull. Due to the flexible nature of these types of vessels, water tightness cannot be guaranteed unless the hatch is installed on a flat and inflexible structure.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
596.88 |
|
|
Impeller Removal Tool
2-9/16" to 4-5/8" (65mm - 118mm)
Features:
Simple to use
Fits ALL makes of impeller
Avoids damage to pump
All Stainless Steel
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
145.98 |
|
|
16-14 AWG - 3/8" Nylon Ring Terminal - 25-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
8.29 |
|
|
16-14 AWG - 3/8" Nylon Ring Terminal - 100-Pack
Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection.
Features:
Nylon insulated with insulation grip
Double crimp, funnel entry
UL 486C
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.97 |
|
|
16-14 Gauge - 3/8" Heat Shrink Ring Terminal - 100-Pack
Wire Range:16-14
Screw Size:3/8"
Quantity: 100
Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
33.34 |
|
|
16-14 Gauge - 3/8" Heat Shrink Ring Terminal - 25-Pack
Wire Range:16-14
Screw Size:3/8"
Quantity: 25
Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
16.28 |
|
|
16-14 Gauge - 3/8" Heat Shrink Ring Terminal - 3-Pack
Wire Range:16-14
Screw Size:3/8"
Quantity: 3
Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
2.74 |
|
|
Threaded Power Rise Sit Down Pedestal
This boat seat pedestal is air-powered and adjustable from 16" to 22" in height.
Features:
Ideal for standard boat seats
360° rotation
Brushed aluminum post
Fits most threaded King Pin base plates
A standard 5-1/4" hole pattern fits virtually all marine seat brands
Class B certified per ABYC standards
|
119.84 |
|
|
King Pin 11" Pedestal Kit
This pedestal kit includes a spring-loaded mounting bracket, a pole, and a base plate.
Features:
Spring-loaded mounting bracket with a 5 1/4" hole pattern
Quick-release brushed aluminum stanchion
7" x 7" base plate
Class B certified per ABYC standards
|
85.63 |
|