|
PRO Angler Remote Only
An angler's dream! 'Control your troll' from anywhere on the boat. Select StrikeMode™ to adjust engine speed and make fish bite automatically!
Features:
Ergonomic remote
Full wireless control
Water-resistant
Backlight LCD display
Works with all Panther brand electro-steer models
Long battery life
Buttons:
Power
Max throttle
Idle/resume
Steer left
Steer right
Mode select
Increase speed
Decrease speed
Manual Mode:
Precision speed control with the push of a button (0-100% in 250 incremental steps)
Steer left and right with the push of a button
Adjustable max. and min. speed
Strike Mode:
Automatically adjust engine speed based on the selected speed profile
Four-speed profiles with simple-to-use adjustability
It helps find the optimal lure speed that will entice the fish to bite
*Steering feature only works with Panther Electro Steer units
|
151.92 |
|
|
PRO Angler Wireless Remote System
An angler's dream! 'Control your troll' from anywhere on the boat. Select StrikeMode™ to adjust engine speed and make fish bite automatically!
Features:
Ergonomic remote
Full wireless control
Water-resistant
Backlight LCD display
Works with all Panther brand electro-steer models
Long battery life
Buttons:
Power
Max throttle
Idle/resume
Steer left
Steer right
Mode select
Increase speed
Decrease speed
Kit Includes:
White wireless controller
Radio receiver
Servo
2 AA batteries
Detachable lanyard
Manual Mode:
Precision speed control with the push of a button (0-100% in 250 incremental steps)
Steer left and right with the push of a button
Adjustable max. and min. speed
Strike Mode:
Automatically adjust engine speed based on the selected speed profile
Four-speed profiles with simple-to-use adjustability
It helps find the optimal lure speed that will entice the fish to bite
*Steering feature only works with Panther Electro Steer units
|
353.84 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Pro Mount Base Only
For years anglers have been demanding a strong, low profile, quick release bracket for holding their fishing electronics. Designed to handle today's most popular sonar units, GPS or portable radios. The ProMount Quick Release Bracket makes it possible to easily remove your electronics weighing up to three pounds from a permanently mounted base with one hand. The 360-degree swivel adjustment lets you see the unit from any angle. The Pro Mount will fit nearly all Lowrance, Garmin, Eagle, Hummingbird, Pin-Point and Vexilar electronics. The permanent base is available separately too, which makes it easy to place several bases around the boat or even in another boat. Several systems have been mounted in trucks to hold GPS units with great success.
The ProMount sells for much less than current brackets, but with more features and versatility. The sleek, low profile of the ProMount is only 1 1/8 inches high. The permanent base has no sharp edges to step-on or wear a hole in your boat cover. An optional installation hole cover spacer comes with every base to give you a well finished look to the mount when installed. Your electronics can also be mounted overhead and hang down on the secure locking rail system of the ProMount to increase the potential places you can mount electronics. The ProMount Quick Release Bracket comes with all stainless steel mounting hardware and the bracket is corrosion resistant. The ProMount is self-draining and easy to clean, so it even looks good when the electronics are not in your boat.
Features:
360-degree swivel adjustment
Sleek, low profile of the ProMount is only 1-1/8 inches high
Fits nearly all Lowrance, Garmin, Eagle, Hummingbird, and Vexilar electronics
Made of tough ABS plastic
Stainless steel mounting screws
One year warranty
Made in the USA
Specifications:
Outside Dimensions: 3.45" x 4.75"
Mounting Hole Spacing: 2.3" x 3.7"
Mounting Hole Size: 1/4"
Supports weights up to 3 pounds
One year warranty
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.20 |
|
|
WR10 Wireless Autopilot Remote Only
WR10 Wireless Autopilot Remote is made of high-quality materials and designed using state-of-the-art technology. It will meet your needs and deliver great quality at an affordable cost.
Features:
Engineered to high standards
High-grade design delivers extended lifespan
Made with premium materials
|
174.08 |
|
|
Low Profile Bronze Depth Only
Depth only low profile transducer (B117)
Compatible with the following Echo Sounders:
DSM250 and DSM300
SL Series: SL755RC, SL760RC , SL1250, and SL1250RC
hsb2 Plus Series: L755RC, L760, L760RC, L1250,and L1250RC
hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D, and L1260DRC
Compatible hull material: wood and fiberglass
Max Power: 600 W
Frequency: 200/50 kHz
Cable: 30ft (10m) cable with connector
**Requires E66066 adapter cable to work with a,c,e,eS Series built in sonar models.**
|
274.99 |
|
|
Low Profile Plastic Depth Only
Depth only low profile transducer (P319)
Compatible with the following Echo Sounders:
DSM250 and DSM300 and DSM30
SL Series: SL755RC, SL760RC , SL1250, and SL1250RC
hsb2 Plus Series: L755RC, L760, L760RC, L1250,and L1250RC
hsb2 HDFI Series: DSM250, L770D, L770DRC, L1260D, and L1260DRC
Compatible hull material: wood and fiberglass
Max Power: 600 W
Frequency: 200/50 kHz
Cable: 30ft (10m) cable with connector
|
209.99 |
|
|
Boat Outfitting Equipment and Supplies
When it comes time for outfitting your boat, you can get all your boating supplies and boating accessories from us. You will never need to go anywhere else for your boat outfitting, because we have all the boat supplies you need. If you're looking for anchors/chain/rope, anodes, antifouling systems or boarding ladders, we have you covered. We can also offer you a selection of bottom paint and bow thrusters to choose from. You may also want cleaning supplies that offer deck/galley options so you can get your boat sparkling and ready to enjoy. We also have display mounts and docking accessories to complete your outfitting needs.
|
|
|
Towing & Trailering
Trailering can add new dimensions to the sense of freedom that comes with boating, and that's one of the reasons it's so popular. With a trailerable boat, you're free to boat on just about any lake, river, bay or inlet. Trailering is great way to explore different waterways in your state or region it's also the most affordable way to store your boat. The tips below can help you learn all about towing and boat trailer maintenance.
Look for Certified Trailers NMMA Trailer Logo. Highly trained third-party inspectors visit the manufacturer each year and physically inspect boat trailer models, ensuring compliance to all certification requirements.
Trailering your boat can add new dimensions to the freedom that comes with boating. If you've never trailered a boat, there are several things you need to consider. First, determine the towing capacity of your car, truck or SUV. You can find this information in the owner's manual of your vehicle. Usually compact family sedans are not suitable for towing more than a small, aluminum fishing boat or PWC with a properly mounted hitch and lighting plug . Most standard pick-up trucks and SUVs can trailer boats up to 25 feet, but always consult your vehicle owner's manual for limitations.
The owner's manual of your boat will list the "dry” weight of the boat, less fuel and gear. When you're assessing your vehicle's towing capacity, be sure to add several hundred pounds to the dry weight to account for gear, gas and accessories.
As the weight, length and beam (width) of a given boat increase, so does the muscle power needed to launch and retrieve it. A small boat may be easy for one person to handle at the ramp, but larger boats (generally those more than 25 feet) may require additional hands. Don't be afraid to ask for help at the ramp if you need it, trailer boaters are always happy to help.
STOP Invasive Species
By following these guidelines:
Never release live or dead bait or bait packaging into a water body, or release aquatic animals from one water body into another.
Share live bait with other anglers or empty your bait bucket in the trash before leaving the area.
Don't drive the boat through aquatic plants; avoid chopping vegetation with outboard motor propeller
Once on dry land, drain water out of every conceivable place that can hold water: Follow factory guidelines for eliminating water from engines. All engines hold water, but jet drives on personal watercraft and other boats can hold extra water.
Remove the stern drain plug and put boat on an incline so that all the water drains out.
Drain livewells, bilge and transom wells.
Empty water out of kayaks, canoes, rafts, etc.
Remove any visible plant, fish, and animal or fragment as well as mud, which can house them. Check trailer, in and around the boat itself, the anchor, props or steering nozzle (PWCs and jet boats), lines, fenders, paddles
Rinse your boat, trailer, and equipment. Clean and dry anything that came in contact with the water. It is best to use high-pressure, hot (104°F) water or a solution of one percent table salt and water. A garden hose will work if no other option is available.
Air-dry your boat and equipment for as long as possible—at least five days is optimal.
Specials Closeouts Remanufactured Rebates
|
|
|
It's that time again when Old Man Winter is shortening or ending our sailing season. Maybe you store your boat in a garage, barn, or at a marina. Now is the time to brush up on safe and useful storage tips.
1. When packing up, clean your electronics with a microfiber cloth by wiping down buttons and screens. A soft cloth is recommended with bottled water to clean screens that may have been stained by saltwater. Screen cleaners will not do the job. You may want to document the wiring so that installation is easy when you are ready to launch.
2. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
3. Remove all batteries. Charge your batteries, clean the terminals, and put a light coat of grease on the terminals. Store your batteries in a warm, dry place. Not in the boat.
4. Winterize the engine:
Use fresh water to flush the engine, including the cooling system, to remove corrosion, dirt, salt, and residue
Refill the cooling system with antifreeze.
Warm up the engine to loosen impurities.
Replace the oil and filters.
Look for the residue of old oil.
Remove and store all belts.
5. Fill the engine with gas and stabilizer. Run the engine for 15 minutes so that the mixture reaches the engine. If your engine uses E-10 fuel, take extra care in that it absorbs moisture ten times more than typical gasoline. (source: trailervalet.com).
6. A thorough cleaning of the boat before you store is a must, whether you have a small fishing boat or a six-cabin yacht. Soap and water will do a thorough job. Clean lockers, refrigerators, coolers, sinks, and cushions. Open all and allow to dry before you store. Next, clean the entire outside from bow to stern. End your cleaning with a coat of wax to the exterior and polish. Leaving a clean boat will make the launch process a lot easier when it's time.
7. Keeping mold and mildew at bay: Mildew comes from humidity. The best way to reduce humidity is ventilation. Although some skippers button up their boats to be airtight for the winter, there has to be some ventilation source. Use products that absorb moisture such as Damp Rid or purchase a dehumidifier such as Eva-Dry Mini Dehumidifiers. Find and seal any leaks and keep the boat clean. Cover the boat with either shrink wrap or a boat cover.
8. Shrinkwrap or a canvas boat cover? Ratings and opinions from the Hull Truth Boating Forum suggest that canvas covers are a better option for durability and cost. The canvas covers can be used season after season. With shrink wrap covers, there is the cost of installation every year. One source said if you are north of Boston, shrink wrapping is preferable because snow will slide right off the plastic wrap, versus weighing down the canvas. Contributors also felt the boat stays cleaner with shrink wrap.
Remove boat cushions, or not? The jury is out about removing boat cushions. Many skippers remove all cushions and bedding. Others spray the cushion bottoms with anti-mold spray. If keeping cabin cushions on the boat, stand them up on end to reduce the chance of mold. Most important is to keep as much moisture out of the cabin, as mentioned above.
Do everything you can to keep your boat critter-free during the winter. Lock all windows. Many small, rabid animals, especially raccoons, are looking for a warm place to nest for the winter. Raccoons are drawn by any food left in boats and will chew carpeting and cushions. Once inside a locked boat, they have no way to exit since they have most likely fallen from an open window. The messes they leave, including their waste, can be very unpleasant and a costly wake-up call in the spring. Keep mice out by plugging up scuppers and vents. Many skippers use Dryer Fresh Cab rodent repellent hoping the strong scent will repel rodents.
Circle Saturday, May 22, 2021, on your calendar. That is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water for a great boating season.
Fair Winds. Smooth Sailing
To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.
__________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com
|
|
|
Pro Troller Smart Tabs Series f/12-16' Boats w/40 - 80 HP
Trolling Brakes and Trim Tabs All in One!
The ProTroller series incorporates the ability to turn SMART TABS into trolling brakes. By simply moving a lever up or down, ProTroller Smart Tabs switch between the most effective trim and stabilizer system on the market to the most effective trolling brakes on the market.
TROLLING BRAKES:
With the levers in the down position, the plates drop down to create equal braking on both sides of the boats, providing the added benefit of tracking straight at ultra low speeds. Steering control is maintained because the propeller is not restricted, as with other systems.
TRIM TABS:
Move the lever up to the running position and enjoy the performance and efficiency of automatic trim tabs. Better ride and handling, faster acceleration, more top speed, and better fuel economy are only a few of the benefits you get with SMART TABS. Not only are they completely automatic, but they can be fine tuned to each boat and to the boaters preference. This unlimited versatility provides performance enhancement unmatched by any other product, and it's GUARANTEED!
IMPROVES YOUR BOAT'S OVERALL PERFORMANCE GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money?
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATION
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.
Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
149.26 |
|
|
Pro Troller Smart Tabs Series f/17-20' Boats w/80 - 175 HP
Trolling Brakes and Trim Tabs All in One!
The ProTroller series incorporates the ability to turn SMART TABS into trolling brakes. By simply moving a lever up or down, ProTroller Smart Tabs switch between the most effective trim and stabilizer system on the market to the most effective trolling brakes on the market.
TROLLING BRAKES:
With the levers in the down position, the plates drop down to create equal braking on both sides of the boats, providing the added benefit of tracking straight at ultra low speeds. Steering control is maintained because the propeller is not restricted, as with other systems.
TRIM TABS:
Move the lever up to the running position and enjoy the performance and efficiency of automatic trim tabs. Better ride and handling, faster acceleration, more top speed, and better fuel economy are only a few of the benefits you get with SMART TABS. Not only are they completely automatic, but they can be fine tuned to each boat and to the boaters preference. This unlimited versatility provides performance enhancement unmatched by any other product, and it's GUARANTEED!
IMPROVES YOUR BOAT'S OVERALL PERFORMANCE GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money?
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATION
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.
Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
189.97 |
|
|
MIAMI BEACH — Nine marine manufacturers were honored for innovative achievement this morning — the opening day of the Miami International Boat Show.
Winning companies received their awards during a media breakfast held at the Miami Beach Convention Center.
The Innovation Awards, organized by the National Marine Manufacturers Association and judged by Boating Writers International, recognize innovative products that benefit the marine industry or consumer. The products must be "practical, cost-effective and available to the consumer within 60 days of award receipt."
The judges chose the winners from 50 products entered in eight different categories.
“There were some exceptional entries this year, and it made the judging process a challenge,” said Zuzana Prochazka, Miami Innovation Awards chair and member of the BWI board of directors.
The judges selected winners for every category, and several additional products were given honorable mentions.
In the consumer electronics and software category, the judges selected the NavNET 3D by Furuno USA Inc. NavNET is a multifunction navigation suite available in both standalone and black-box units.“This is a truly game-changing product that sets the standard for the industry,” judge John Wooldridge said.
Two honorable mentions were also awarded in this category, which the judges say was crowded with excellent entries. The first went to the HX850S floating hand-held, GPS-enabled VHF from Standard Horizon, and the second was presented to the Satellite Personal Messenger Device, also known as SPOT.
The AirBattens from UK-Halsey Miami was the winner in the Consumer-Installed Non-Electronic Hardware category. According to the judges. AirBattens increases in-mast furling mainsail performance by 15 percent by significantly improving sail shape.
An honorable mention in this category was given to the design of the Adaptive Seating & Steering System developed by Shake-A-Leg Miami.
In the Consumer Personal Gear category, the Innovation Award was presented to the Coastal Compact Life Raft from Revere Survival Products.
The H2 LED Dock, Marina and Pier Lights by TouchStone Accent Lighting took home the award in the Consumer-Installed Docking and Fendering Equipment category. The H2 LED cleat light was called a simple, well-engineered and sleek light available in 12-volt or solar versions that mount under a standard 10-inch cleat.
The True North 34 from Pearson Yachts/True North Yachts was the winner in the Inboard and Outboard Cruisers category. The judges said the 34-foot True North combines an innovative hideaway tailgate/transom and moveable cockpit seating for a truly unique design.
Walker Bay Boats' Airis High-Pressure Inflatable Kayak was deemed the winner in the Inflatables, Small Boats Up to 15 Feet and Tenders category. Constructed using patent-pending AirWeb technology, this one-of-a-kind performance hull design can be inflated to more than six psi, resulting in a rigid and stable platform that is lightweight and compact enough to be carried as a backpack, the judges said.
Yamaha Motor Corp. took home the award in the PWC, Jet Boats and Pontoon Boats category for its Wave Runner SHO. Yamaha's SHO features several PWC-industry ‘firsts,' including: A nano-engineered hull that decreases the craft's weight by 25 percent; a no-wake mode that automatically sets engine RPM at optimal no-wake speed; and cruise control.
The RPT (Revolutionary Planning Technology) pontoon tube design by Sylvan Marine received an honorable mention from the judges in this category.
In the Runabouts and Fishing Craft category, judges presented the Innovation Award to Boston Whaler for its 230 Dauntless. The revolutionary approach to seating in the Dauntless 230 sets it apart in its class, according to the judges.
This year's Environmental Award went to the Eco-Star 200 electric boat by Starcraft Marine. The Eco-Star 200 combines access to electrical motors with exceptional maneuverability of twin propellers, all on the popular deck boat platform. The judges considered this design to be a positive step for both the boating industry and use of alternative energy propulsion systems.
Congratulations to all the 2008 Innovative Achievement Award winners from CLR Marine.
We must mention one of the 2007 Innovative Achievement Award winners was the Companionway CloZures.
|
|
|
SX ProTroller Series Trim Tabs 9.5 X 10 f/14-17' Boats w/40-80 HP
Trolling Brakes and Trim Tabs All in One!
The ProTroller series incorporates the ability to turn SMART TABS into trolling brakes. By simply moving a lever up or down, ProTroller Smart Tabs switch between the most effective trim and stabilizer system on the market to the most effective trolling brakes on the market.
TROLLING BRAKES:
With the levers in the down position, the plates drop down to create equal braking on both sides of the boats, providing the added benefit of tracking straight at ultra low speeds. Steering control is maintained because the propeller is not restricted, as with other systems.
TRIM TABS:
Move the lever up to the running position and enjoy the performance and efficiency of automatic trim tabs. Better ride and handling, faster acceleration, more top speed, and better fuel economy are only a few of the benefits you get with SMART TABS. Not only are they completely automatic, but they can be fine tuned to each boat and to the boaters preference. This unlimited versatility provides performance enhancement unmatched by any other product, and it's GUARANTEED!
IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money?
The SX series incorporates all of the fully automatic features of our popular SMART TABS, in addition to the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools required are a drill with a 3/16" bit and a phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any power boat, and TRACKING RIBS have been added to improve handling at higher speeds.
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATION
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.
Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
149.26 |
|
|
SX ProTroller Series Trim Tabs 9.5 X 10 f/17-20' Boats w/80-175 HP
Trolling Brakes and Trim Tabs All in One!
The ProTroller series incorporates the ability to turn SMART TABS into trolling brakes. By simply moving a lever up or down, ProTroller Smart Tabs switch between the most effective trim and stabilizer system on the market to the most effective trolling brakes on the market.
TROLLING BRAKES:
With the levers in the down position, the plates drop down to create equal braking on both sides of the boats, providing the added benefit of tracking straight at ultra low speeds. Steering control is maintained because the propeller is not restricted, as with other systems.
TRIM TABS:
Move the lever up to the running position and enjoy the performance and efficiency of automatic trim tabs. Better ride and handling, faster acceleration, more top speed, and better fuel economy are only a few of the benefits you get with SMART TABS. Not only are they completely automatic, but they can be fine tuned to each boat and to the boaters preference. This unlimited versatility provides performance enhancement unmatched by any other product, and it's GUARANTEED!
IMPROVES YOUR BOAT'S OVERALL PERFORMANCE - GUARANTEED!!!
If these trim tabs don't provide you with an outstanding performance increase, contact us within 30 days of your purchase.
Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self adjust and performance better for less money?
The SX series incorporates all of the fully automatic features of our popular SMART TABS, in addition to the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools required are a drill with a 3/16" bit and a phillips screw driver. SMART TABS SX provide un-equaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any power boat, and TRACKING RIBS have been added to improve handling at higher speeds.
Our breakthrough technology in trim tabs is completely automatic requiring no operator adjustment while underway. Nauticus trim tabs self adjust according to how you load and maneuver your boat.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.
Reduce the minimum planning speed by up to 33%
Faster Acceleration
Increase top speed
Provide a level, more comfortable ride at lower speeds
Improve fuel economy, handling and safety
NO HYDRAULICS - NO ELECTRIC SWITCHES
Nauticus trim tabs are completely automatic requiring no operator adjustment while underway.
The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.(see installation instruction).
SPEED REGULATION
Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.
Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.
BOAT STABILIZERS
Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.
ONE OF A KIND
The unique system is the only one of its kind in the industry. The internal valve system is truly "smart" in its design of controlling you boats performance.
It will reduce the minimum planning speed by 33%
Provide a level, more comfortable ride at lower speeds
Improve economy, handling and safety
As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.
The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.
INSTALLATION IS SIMPLE
With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.
All mounting hardware, instructions, and templates are included.
SMART TABS require NO THROUGH HULL DRILLING
|
149.26 |
|