Gen 2 Panel/Aux Loom Cable - 10M Features: Lewmar Gen 2 Panel/Aux Loom Cable Cable: 10M Includes pre-installed connector ends

Gen 2 Panel/Aux Loom Cable - 2M Features: Lewmar Gen 2 Panel/Aux Loom Cable Cable: 2M Includes pre-installed connector ends

Gen 2 Panel/Aux Loom Cable - 22M Features: Lewmar Gen 2 Panel/Aux Loom Cable Cable: 22M Includes pre-installed connector ends

Generation 2 Single Joystick Thruster Controller Lewmar’s range of thruster controls provides superior tactile control of single or dual thruster installations.  The controllers are installed without the need for rear access and feature a snap-on bezel to neatly hide the mounting screws.  A cover is also included, providing additional security against accidental use and giving extra environmental protection.   If replacing a previous generation touch panel, joystick panel, or dual joystick panel, the existing mounting hole and fixing screw positions can be reused.  Compatible with: Lewmar TT, RT, SRT & VRT thrusters are fitted with a blue box and can be fitted to thrusters fitted with a black box using a controller adapter. *Requires Lewmar connecting cable. Features: The ergonomic control ‘pad’ gives tactile feedback  Membrane switch panel sealed from dust and moisture ingress  Multi-function LED indicator displays system deployment, thruster operation, low voltage, motor temperature warnings & fault conditions.  Fit existing cut-out of Lewmar joysticks  Removable cover  Technical Specifications: Power - 12/24 Volt DC Cut-out - 2.5" Diameter *Sold as an Individual

Generation 2 Pro-Series Compound Gear Kit  Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses. Compatible With: Generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses *Sold as an Individual

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

keywords: ProMariner, ProSport, GEN 2, ProMariner ProSport GEN 2, invertor, charger

Caterpillar Loom Cable - 12 Way Caterpillar Loom Cable, 12 Way is used to connect ECI-100 to Caterpillar engines in order to display engine data on Raymarine MFDs.

Y-Loom Cable Connects SeaTalkng network to Volvo Penta IPS system

i6W 2-Axis Global System with 23.6" Reflector & Worldview LNB Gen2 *Must Ship Truck Freight The available i6W is equipped with Intellian's WorldView LNB, which allows for complete global operation without needing to adjust the antenna. WorldView ready, the Intellian i6W is ideal for larger yachts or commercial vessels traveling across different global regions. With its highly accurate satellite tracking capability, the i6 outperforms in all conditions. Intellian's best-selling system, the i6W is renowned for its robustness and exceptionally strong signal gain. Great for extended offshore voyaging, the i6W is ideal for ocean cruisers, larger yachts and commercial vessels. The i6W can operate in any global coverage area without manual intervention. Fully Automated System Automatic Satellite Search and Identification Function 2-axis high speed tracking system. High Performance Antenna 60 cm (24 in) diameter parabolic antenna for receiving Ku-Band satellite signals. Circular or linear polarization depending on region and LNB selected. Built-in HD module for Ku-band HD TV reception. Quick & Quiet Technology Technology allows you to tune in quickly, maintain a solid signal lock, and enjoy your favorite TV programming in quiet comfort. The Wide Range Search (WRS) Algorithm delivers the fastest signal acquisition available anywhere. Dynamic Beam Tilting (DBT) technology uses intelligent, real-time beam analysis to ensure superior signal quality while eliminating intrusive background noise experienced with conventional antennas. Antenna Control Unit Intuitive controls and digital satellite information display on the ACU. Wireless automated updates and diagnostics via Aptus PC and Aptus Mobile DC Out Port for easy power supply to the Intellian MIM or the Shaw Decoder Module. Multiple Receiver Capability Multiple receivers and TVs can be connected using a Multi-Switch (M2-TD02) sold separately or the Intellian MIM (Multi-Satellite Interface Module). Using the MIM a master receiver can be selected to control the target satellite. In North America, when using Dish Network or Bell TV, a MIM is required, enabling automatic satellite switching from your remote control just like you do at home. Built-in GPS and NMEA 0183 Interface The i6 includes a built-in GPS inside the Antenna Unit for faster signal acquisition. The ship's GPS can also be connected through the NMEA 0183 port on the rear panel of the ACU. Stylish Radome Profile 70 cm (27.5 inch) antenna radome diameter Antenna weighs less than 20 kg (44 lbs) What's in the box? All Satellite Systems include the following parts as standard: Antenna & Radome 60 cm (24?) Reflector & LNB ACU (Antenna Control Unit) PC Controller Program (Software CD included) Installation & Operation Manual Installation Template Quick Installation Guide Installation Kit: ACU Table Mounting Bracket x 2EA 15m (49 ft) x 1EA Antenna-ACU RG6 Coaxial Cable 3m (10 ft) x 1EA ACU-IRD RG6 Coaxial Cable 10m (33 ft) x 1EA DC Power Cable 1.8m (6 ft) x 1EA PC Serial Cable Connectors & Screws 3 Year Global Warranty Industry leading 3-year parts and workmanship guarantee with a 2-year labor warranty for all antenna systems, ensuring peace of mind with your hardware investment.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

140TT 2.2kw Gen. 2 Bow Thruster - 12V Maneuvering around the dock area can be difficult, but Lewmar’s TT Thrusters make docking simple. The revolutionary design of the TT propeller, the latest in Lewmar’s long history of custom thruster solutions, achieves a perfectly even thrust in both directions for maximum control and maneuverability. All Lewmar Thrusters have been extensively tested, resulting in a smooth, efficient, and quiet performance that will have you docking like a pro in no time. Features: No reservoir to install, no leaks, and no maintenance High performance 5 blade propellers give equal thrust in both directions High integrity seal Spline driven propeller, no drive pin or anode required Blue box electronics prevent misuse and protect motor Hardened and ground spiral bevel gear for maximum efficiency and quiet power transmission Self-resetting thermal protection  Easy plug together switch connections Minimum silhouette hub for smooth water flow Technical Specifications: Voltage - 12V Power - 2.2 KW Power - 3 HP Tunnel Size - 5.5" Thrust - 92lb Weight - 29lb *Sold as an Individual

RayNet to RJ45 Male Cable - 10M Part #: A80159 RayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays. The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector. Features: 10M (32.81') RayNet to SeaTalkhs (RJ45) cable

NMEA2000 Cable - 10M WeatherStation cables are available in four versions: NMEA 0183, NMEA 2000, combined NMEA 0183 and 2000, and Furuno NMEA 0183. All cables have a round white connector at one end that fits into the base of a weather station. NMEA 2000 cables end in a standard male NMEA 2000 5-Pin connector. If the cable is longer than 6 meters, it contains a built-in termination resistor and is intended to be used as an extension of the network backbone. NMEA 0183 cables end in an Airmar 8-Pin connector (CX-128) which can be removed if necessary. Combined cables end in an Airmar 8-Pin connector and are supplied with an Airmar splitter box that has NMEA 0183 and NMEA 2000 output ports. Furuno cables end in a 7-Pin Furuno connector and are designed to plug into Furuno NMEA 0183 equipment. With NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

SeaTalk hs Network Cable, 10m Raymarine SeaTalk hs network cables provide waterproof, reliable, high-speed connections between E-Series components. Available in multiple lengths to simplify installation, the network cable locks positively into E-Series displays, switches and couplers. A 1.5 meter SeaTalk hs cable is supplied with each E80 and E120 display.

Power Cable - 10M with Bare Wires for Quantum Quantum 10M power cable with Bare wires.