Trac-Lock Slide This Trac-Lock™ seat mount is a high-strength aluminum slide and swivel that can rotate 360 degrees. This mount has a large 7-1/4 x 13-in. seat mounting platform and travels 5-1/4 inches forward and backward on self-lubricating pads.  Features: Adds 1-1/4 in. to the height of the pedestal Centrally located locking handle, easy to reach with left or right hand Specifications: Warranty: 5 Years

Trac-Lock Swivel/Slide Non-Locking Mount for 2-3/8" Post Trac-Lock slide and swivel seat mount are for a  2-3/8 in. post. Features: Travels 5-1/4″ Forward and backward with fingertip control Self-lubricated pads provide a smooth, easy glide Made of high-strength aluminum Rotates 360° Powder-coated swivel prevents corrosion Fits 2-3/8″ posts Specifications: Platform (inch): Large 7-1/4″ x 13″  *5-Year Limited Warranty

Universal Trac-Lock™ Slide Features: Large 7-1/4″ x 13″ x 2″ High 0-Degree Platform High-Strength Aluminum Travels 5-1/4″ Fore And Aft

Trac-Lock Swivel/Slide Non-Locking Mount for 2-7/8" Post Trac-Lock locking slide and swivel seat mount is for a 2-7/8 in. post. Features: Travels 5-1/4″ Forward and backward with fingertip control Self-lubricated pads provide a smooth, easy glide Made of high-strength aluminum Rotates 360° Powder-coated swivel prevents corrosion Fits 2-7/8″ posts Specifications: Platform (inch): Large 7-1/4″ x 13″  *5-Year Limited Warranty

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

Second Generation Posi-Lock Manual Adjust 2-7/8" Pedestal - No Swivel Non-removable pedestal system in 2-7/8 in. offers a heavy-duty base and post for today's larger and faster recreational boats. The base is permanent mold AC7A aluminum alloy with an anodized finish for maximum strength and corrosion protection. Then a 2-7/8 in. heavy-duty extruded post is pressed and hydra-formed into the base mechanically forming them together. This proprietary process allows maximum strength for a sturdy pedestal. Features: 2-3/8" inner post with 2-7/8" locking adapter, 9 in. round base Adjusts in 1-inch increments  Anodized post and base Use with 2-7/8" Trac-Lock™ slide or swivel (sold separately) Adjust from 11-7/8" to 14-3/4" Warranty: 5 years

Taper-Lock™ Trac-Lock™ 2-3/8" Non-Locking Seat Mount Features: 7″ x 7″ Non-Locking Trac-Lock™ Swivel High-Strength Aluminum With Powder Coat Finish Rotates 360° Fits 2-3/8″  Post Adds 3/4″ To Height Of Pedestal

Taper-Lock™ Trac-Lock™ 2-3/8" Locking Seat Mount 2-3/8″ post mount with bushing for snug fit. Made of high-strength aluminum, with powder coat finish. Centrally located locking handle, easy to reach with left or right hand. Features: Rotates 360° For use with 2-3/8″ fixed height pedestals Post Adds 3/4″ To Height Of Pedestal

Taper-Lock™ Manual Adjust Post - 21" to 31" for 2-3/8" 2-Piece Manual Adjustable Set Includes:  2-3/8″ Manual Adjustable Post With Posi-Lock System Trac-Lock™ Non-Locking Swivel (3100031-1) Use With Any Taper-Lock™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only) 

Taper-Lock™ Manual Adjust Post - 13" to 16" for 2-3/8" 2-Piece Manual Adjustable Set Includes: 2-3/8″ Manual Adjustable Post With Posi-Lock System Trac-Lock™ Non-Locking Swivel (3100031-1) Use With Any Taper-Lock™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only) 

Series 25 T-Track - Composite Slide - 102mm(4") For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Lightweight Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fibre equivalents. The car design has been modelled and optimised using finite element analysis and rapid prototyping techniques to achieve maximum strength-to-weight characteristics. Orbit Block™ models use a Dyneema® Link which is 10 times stronger and lighter than steel, to provide the articulated connection between block and car. Integrated Functionality The clever 2-piece car body is molded from a composite material that delivers low friction on the alloy track without the need for separate inserts. It also provides the required mechanical strength without the weight and corrosion drawbacks of metal parts. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories. Low Profile and Compact Sleek styling and the positioning of the attachment pin provide a low lead aft for the lead block. The Dyneema® Link allows full articulation. The plunger stop button has a flush finish and the contoured form of the car eliminates the chance of lines and sails becoming snagged. Precise Adjustment The ergonomic plunger stop toggle combined with low friction of the car body allows for easy one-handed adjustment. The toggle is located at the rear of the car for easy access from the cockpit on sports boats and small keel boats. An arrow is located on the side to indicate the position of the stop for repeatable settings. A 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Features: Low profile and lightweight Removable attachment pin to suit either Dyneema® Link or a shackle Integrated becket for 2:1 headsail sheet systems Applications: Headsail sheet leads on boats up to 8M (26'). Materials: Toughened, glass fibre reinforced Nylon slide. DSpecifications: Length: 102mm(4") M.W.L.: 500kg(1,100lbs) B. L.: 1,000kg(2,200lbs) Weight: 107g(3.8oz)

Series 25 T-Track - Composite Slide - Series 40 BB Orbit Block? 153; - Stand Up - Suits 9mm(5/16") Rope For small keel boats and sportsboats T-track jib leads are a great blend of performance and functionality in a simple, efficient package. Composite slide bodies with plunger stops run on anodised aluminium track, and allow quick and easy manual adjustment. Lightweight Composite jib lead cars continue the design philosophy of the award winning Ronstan BB and RT Orbit Blocks™, with virtually all metal components now replaced with high-tech polymers and fiber equivalents. The car design has been modelled and optimised using finite element analysis and rapid prototyping techniques to achieve maximum strength-to-weight characteristics. Orbit Block™ models use a Dyneema® Link which is 10 times stronger and lighter than steel, to provide the articulated connection between block and car. Integrated Functionality The clever 2-piece car body is molded from a composite material that delivers low friction on the alloy track without the need for separate inserts. It also provides the required mechanical strength without the weight and corrosion drawbacks of metal parts. An integrated becket at the forward end of the car suits 2:1 sheet systems and the removable threaded pin allows easy fitting of alternate blocks and accessories. Low Profile and Compact Sleek styling and the positioning of the attachment pin provide a low lead aft for the lead block. The Dyneema® Link allows full articulation. The plunger stop button has a flush finish and the contoured form of the car eliminates the chance of lines and sails becoming snagged. Precise Adjustment The ergonomic plunger stop toggle combined with low friction of the car body allows for easy one-handed adjustment. The toggle is located at the rear of the car for easy access from the cockpit on sports boats and small keel boats. An arrow is located on the side to indicate the position of the stop for repeatable settings. A 'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Features: Low profile and lightweight Removable attachment pin to suit either Dyneema® Link or a shackle Integrated becket for 2:1 headsail sheet systems Applications: Headsail sheet leads on boats up to 8M (26'). Materials: Toughened, glass fibre reinforced Nylon slide. DSpecifications: Length: 102mm(4") M.W.L.: 325kg(715lbs) B. L.: 700kg(1,540lbs) Weight: 144g(5.1oz)

Series 19 C-Track with Slide, Swivel Fairlead, Cleat & Stop Features: Spring-loaded plunger stops allow fast, positive positioning of track slides Slides are available with swiveling cleat and fairlead to suit different crewing positions Features a small cam cleat and fairlead - suits line sizes 2-8mm (3/32-5/16") Applications: Dinghy and small catamaran jib sheet leads Dinghy outhauls Specifications: Length: 2-13/16"

Locking Slide Clips - Pair Flojet is the global leader of specialty diaphragm and magnetic drive pumps and accessories for beverage dispensing, general industrial equipment, agricultural spraying, marine, and recreational vehicles.  Side clips come as a pair. 

2155 - Remote Control Contura Switch  with Lockout Slide Vibration, shock, thermoschock, moisture and salt spray resistant Lockout slide reduces the risk of accidental switching Certifications: Meets UL 1500 and ISO 8846 external ignition protection requirements IP67 - Temporary immersion for 30 minutes Technical Specifications: Amperage Maximum Operating - 20A @ 12V DC and 15A @ 24V DC Amperage Operating Current - 18mA Pole/Throw - SPDT Lighting - LED rated for a 1/2 life of 100,000 hours Mounting Hole (H x W) - 1.45" x .83" (36.83" x 21.08") *Sold as an Individual WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.