|
Premier Wiper Arm - Stainless Steel - Single - 20"-25"
Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield.
Features:
Compatible with 2.5 wiper motors
Wet single-wiper style
Physical Specifications:
Each in Package Height (in): 1"
Each in Package Width (in): 2.9"
Each in Package Length/Depth (in): 21.5"
Each in Package Weight (oz): 12.96"
|
85.43 |
|
|
Premier Wiper Arm - Stainless Steel - Single - 15-20"
Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield.
Features:
Compatible with 2.5 and 1.5 MRV wiper motors
Wet single-wiper style
Physical Specifications:
Each in Package Height (in): 0.6"
Each in Package Width (in): 3.1"
Each in Package Length/Depth (in): 19.5"
Each in Package Weight (oz): 12.8"
|
69.31 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 14"-20"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
33.54 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 6.75"-10.5"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
28.57 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 10"-14"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
29.76 |
|
|
Stainless Steel Single Block - 25mm Sheave Diameter for 25mm Stanchion Pivoting
A single block intended for use on a dinghy. The block is light, reliable, and has good performance.
Applications:
For stanchion applications - furling system line
Specifications:
Materials Composite sheave and 316L stainless steel grade cheeks
Rope size: (inch) 5/16"-25/64" / (mm) 8-10
Length: (inch) 3 47/64" / (mm) 95
Width: (inch) 2 3/32" / (mm) 53
Thickness: (inch) 53/64" / (mm) 21
Sheave Diameter: (inch) 63/64" / (mm) 25
Working load: (lb) 610 / (mm) 280
Breaking load: (lb) 880 / (mm) 400
Weight: (lb) 0.154 / (g) 70
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
*Sold as an Individual
|
41.22 |
|
|
Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low Pitch
Features:
All Stainless Steel Inside & Out
304 Stainless Steel inside and out including a sealed sound unit
No rust
Guaranteed for 5 years
All meet ABYC A-23 for boats up to 12 meters
Pre-wired
It fits existing hole patterns
Specifications:
Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm)
Max Amp Draw: 3 Amps.
Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers
Rating: 106 dB @ 1 Meter Installed
|
39.43 |
|
|
Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V High Pitch
Features:
High pitched
304 Stainless steel inside and out
5-year Guarantee
Prewired
Mounting holes have 4" centers
Hardware not included
3"L x 3-1/4"W x 1-1/2"H (7.5 x 8 x 4.5cm)
|
39.43 |
|
|
Stainless Steel Standoff 1.25" Base 1/4" x 20 Thread .75" Tall - 6-Pack
Unlike the SOB standoffs which have a blind thread, the SOT series standoffs
have a thread which runs all the way through the barrel of the standoff.
This allows the standoff to be mounted from either side of the base. These
parts are manufactured in 316 stainless steel making them suitable for deck
applications. This standoff is inertial (friction) welded to the base
yielding a very strong part. The bases are all 1.25" in diameter. Use for
through deck mounting of hardware or anywhere you need a fixed female
thread.
|
55.69 |
|
|
Stainless Steel Stud 1.25" Base 1/4 x 20 Threads 2.25" Tall - 10 Pieces
The stainless steel stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs in shear. All studs have 1/4 x 20 threads. Use for hanging panels, through deck mounts and many other uses.
|
50.21 |
|
|
Stainless Steel Stud 1.25" Base 1/4 x 20 Thread 0.75" Tall - 100 Pack
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
|
232.32 |
|
|
Stainless Steel Stud 1.25" Base #10 x 24 Thread 2.5" Tall
Stainless stud mounts to virtually any surface using our acrylic adhesive. This is a structural part with 500 lbs of tensile strength and 650 lbs shear strength. Can be bonded from either surface of the base plate.
|
56.27 |
|
|
Stainless Steel Stud 1.25" Base 10 x 24 Threads .50" Tall - 15 Quantity
Studs with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that require a smaller stud diameter. These studs can be bonded from either surface of the base plate.
|
24.83 |
|
|
Stainless Steel Stud 1.25" Base 10 x 24 Threads 1.00" Tall - 15 Quantity
Studs with smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items that require a smaller stud diameter. These studs can be bonded from either surface of the base plate.
|
28.66 |
|
|
xSonic SS175H-W/20 Stainless Steel Chirp Transducer - 20° 1KW Tilted Element - 9 Pin Connector
SS175H-W/20 CHIRP Transducers enable bottom detection down to 300m+ with 5 to 10 times greater detail and Resolution so precise it's possible to distinguish between individual bait Fish, game Fish, and underwater structures.
*This Transducer is designed for smaller boats up to 36 feet (11 m).
Features
Frequencies: 130-210 kHz @ 25° constant beamwidth
16° - 25° Deadrise
300m+ Usable Depth
6m+ or large Boat size with Steel or Aluminum hulls
Depth & Temperature
CHIRP Technology
High-Performance
Stainless Steel
Exclusive Transducer ID
9-Pin Connector, 10M Cable
|
1458.80 |
|