|
Premier Wiper Arm - Stainless Steel - Single - 15-20"
Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield.
Features:
Compatible with 2.5 and 1.5 MRV wiper motors
Wet single-wiper style
Physical Specifications:
Each in Package Height (in): 0.6"
Each in Package Width (in): 3.1"
Each in Package Length/Depth (in): 19.5"
Each in Package Weight (oz): 12.8"
|
69.31 |
|
|
Premier Wiper Arm - Stainless Steel - Single - 20"-25"
Combine the heavy-duty construction and materials of the Premier wiper arm line with a built-in wet-arm system that allows for a clean and easy installation of a washer system. A simple and easy way to keep your windshield clean, the Premier wet arms feature a black PVC hose that runs up the center of the arm and ends in a four-nozzle fixture that is an integral part of the wiper arm itself. Each solid brass nozzle is adjustable to provide a maximum coverage spray pattern for almost any windshield.
Features:
Compatible with 2.5 wiper motors
Wet single-wiper style
Physical Specifications:
Each in Package Height (in): 1"
Each in Package Width (in): 2.9"
Each in Package Length/Depth (in): 21.5"
Each in Package Weight (oz): 12.96"
|
85.43 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 14"-20"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
33.54 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 6.75"-10.5"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
28.57 |
|
|
Wiper Arm Deluxe Stainless Steel Single - 10"-14"
Deluxe arms are used on Standard and Heavy-Duty motors.
Features:
Stainless Steel
Arm has "articulating/bend-back" feature
Motor shaft mounting has additional set screw clamping
Compatible with 2.5, 1.5, 1000, MRV wiper motors
Dry single wiper style
|
29.76 |
|
|
Stainless Steel Single Block - 25mm Sheave Diameter for 25mm Stanchion Pivoting
A single block intended for use on a dinghy. The block is light, reliable, and has good performance.
Applications:
For stanchion applications - furling system line
Specifications:
Materials Composite sheave and 316L stainless steel grade cheeks
Rope size: (inch) 5/16"-25/64" / (mm) 8-10
Length: (inch) 3 47/64" / (mm) 95
Width: (inch) 2 3/32" / (mm) 53
Thickness: (inch) 53/64" / (mm) 21
Sheave Diameter: (inch) 63/64" / (mm) 25
Working load: (lb) 610 / (mm) 280
Breaking load: (lb) 880 / (mm) 400
Weight: (lb) 0.154 / (g) 70
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
*Sold as an Individual
|
41.22 |
|
|
Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low Pitch
Features:
All Stainless Steel Inside & Out
304 Stainless Steel inside and out including a sealed sound unit
No rust
Guaranteed for 5 years
All meet ABYC A-23 for boats up to 12 meters
Pre-wired
It fits existing hole patterns
Specifications:
Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm)
Max Amp Draw: 3 Amps.
Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers
Rating: 106 dB @ 1 Meter Installed
|
39.43 |
|
|
Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V High Pitch
Features:
High pitched
304 Stainless steel inside and out
5-year Guarantee
Prewired
Mounting holes have 4" centers
Hardware not included
3"L x 3-1/4"W x 1-1/2"H (7.5 x 8 x 4.5cm)
|
39.43 |
|
|
SS75H Stainless Steel Thru-Hull 20° Tilt 600W Chirp - High Frequency
High-Frequency CHIRP Transducer with Temperature with Stainless Steel Thru-Hull.
Features:
Function: Depth,Temperature
Frequency: 130-210 kHz
Mount Style: Thru-Hull, Flush, 20 Degree Tilt
Housing Material: Stainless Steel
Install Type: Thru-Hull
Power Rating: 600W
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
800.00 |
|
|
SS60 Stainless Steel Thru-Hull 20° Tilt, 50/200, 10-Pin
Stainless Steel Thru-Hull Transducer with Temp, 600W (10-Pin), 20° Tilted Element. If a thru-hull flush-style transducer is called for, the Tilted Element SS60-SLTD/20 will accommodate a deadrise angle between 16° and 24°. This transducer compensates for deadrise by angling the element inside the housing. The transducer is labeled with an arrow on top of the housing that should point towards the keel, whether it is installed to port or starboard. This ensures that the tilted element within the housing is given the correct orientation.
Features:
600 Watts
50/200 kHz
45/12 degree Beam Angles
Stainless Steel Thru-Hull with Temperature
30' Cable with 10-Pin Connector
|
426.67 |
|
|
xSonic SS175H-W/20 Stainless Steel Chirp Transducer - 20° 1KW Tilted Element - 9 Pin Connector
SS175H-W/20 CHIRP Transducers enable bottom detection down to 300m+ with 5 to 10 times greater detail and Resolution so precise it's possible to distinguish between individual bait Fish, game Fish, and underwater structures.
*This Transducer is designed for smaller boats up to 36 feet (11 m).
Features
Frequencies: 130-210 kHz @ 25° constant beamwidth
16° - 25° Deadrise
300m+ Usable Depth
6m+ or large Boat size with Steel or Aluminum hulls
Depth & Temperature
CHIRP Technology
High-Performance
Stainless Steel
Exclusive Transducer ID
9-Pin Connector, 10M Cable
|
1458.80 |
|
|
MaxBlast Stainless Steel Trumpet 12V Horn - Single
MaxBlast Single Trumpet Air Horn is constructed of durable stainless steel. When installed, the trumpet should point slightly downward to permit water drainage.
Specifications:
Stainless Steel
Single
12V
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
73.04 |
|
|
Stud Catch
Length: 1-16/16"
Width: 3/8"
Fastener: #6(2)
Material: 316 Stainless Steel
|
27.20 |
|
|
Deck Fill for Carbon Canister System - Angled Body & Scalloped Stainless Steel Cap
Pressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back.
Features:
Fits 1-1/2 (inch) fill hose
Compatible with Ethanol blended fuels
Designed and tested to prevent water from entering the fuel system
All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling
EPA / CARB Certified
Dual 1 psi overpressure relief safety valves built into the deck fill caps
Automatic nozzle shutoff 4-18 gpm
Deck Fill for Carbon Canister System, angled, stainless steel, single pack
|
68.76 |
|
|
70 Series Screwless Flush Mount Rod Holder - 15 Degree - Stainless Steel - Cast Bottom - Black Liner - Boxed
These flush mount rod holders are made of 316L stainless steel and have a wide, low-profile cap that improves the look of any boat and provides outstanding mounting strength.
Features:
316L stainless steel
Fits 2-3/16 in. hole diameter
Cast models feature a ½ in. drain hole
No logo on the cap for a sleek low profile
The liner runs the full length of the tube
Includes a backing plate and installation nut
Installation requires Model # 53679 Installation Socket
Specifications:
Degrees: 15 degrees
Bottom Style: Cast
Liner Color: Black
Inner Diameter: 1-5/8 in.
Outer Diameter: 2-1/8 in.
Cap Size: 4-1/2 in. long x 3-5/8 in. wide
Tube Length: 9 in.
|
95.28 |
|