|
Hold Down Kit for 550P & Campa XT
Thetford hold-down kit is produced for 550P and Campa XT models.
|
23.05 |
|
|
Hold Down Kit for Small Porta Potti
This hold-down kit will fit Thetford Porta Potti model numbers 92868, 92865, 92871, 92859 and 92862
|
23.05 |
|
|
Porta Potti 335 Marine Toilet with Hold Down Kit
The Porta Potti 335 with the Hold Down Kit is a super compact portable toilet which is perfect to use on boats! The toilet is delivered with a special ‘hold down kit’ to attach the toilet to the floor of your boat, wherever you want. One simple action releases the toilet.
Features:
White finish
Manual flush, piston pump
Integrated pour-out spout
Integrated cover-lock
Hold Down Kit
Benefits:
Perfect for use on boats
Modern, refreshed design
Improved valve handle system
Improved carry handle of the waste holding tank
Improved seating comfort
|
118.69 |
|
|
Porta Potti 135 Marine Toilet with Hold Down Kit
Whether you’re a day tripper or a week-long cruiser, our marine portables are compact, convenient and designed with marine-specific features and benefits. Thetford Marine Porta Potti – don’t leave the dock without it.
Features:
Durable, easy to use and easy to clean
Contemporary styling with integrated seat and cover design
Ergonomic carrying handle
Exclusive, rotating pour-out spout
Deodorant sample included
Bellows pump flush
Sealed valve keeps odors in holding tank
Easy-to-read Level Indicator tells when it’s time to empty (available with piston flush only)
Hold down kit secures toilet to deck
Optional MSD (not interchangeable with pour-out spout)
1-year warranty
|
96.41 |
|
|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Porta Potti 565E Curve Portable Toilet
The Thetford Porta Potti® Curve Portable Toilet is durable, easy to use and to clean. High Profile, sleek, modern and homelike design with a comfortable seat height.
Please note: Replaces Porta Potti Model 550E.
Features:
Sanitary, odorless, and leak proof, Porta Potti is the world's leading brand of portable toilets
On the road, on the water, or at home, Porta Potti is ideal
If a power outage causes loss of water, it's Porta Potti to the rescue
Truckers love Porta Potti too, because it's safe and convenient in a sleeper cab
Battery-powered flush
Sleek, modern and homelike design
High Profile
Comfortable seat height
Increased bowl size
Hidden controls
Power: (6) AA Batteries (Included)
Improved water tank carrying handle
Optional Hold Down Kit (92415 Sold Separately)
Integrated toilet paper holder
Holding tank level indicator for fresh water and waste tanks
Warranty: 1-Year
Specifications:
Dimensions:
Height: 17-5/8" (44.8 cm)
Depth: 17-3/4" (45 cm)
Width: 15-1/4" (38.8 cm)
Capacities:
Fresh Water: 4.0 gal (15 liters)
Waste Tank: 5.5 gal (21 Liters)
Average Flushes: 56
Caution: Do not use stiff brushes or homemade products to clean or lubricate the valve and seal, as these will damage the seals and surfaces, causing odors to escape from holding tanks. Thetford recommends using Aqua-Clean and toilet seal lubricants.
|
178.03 |
|
|
Cooler Tie Down Kit
This Cooler Tie Down Strap Kit includes everything you need to secure your cooler to your boat, truck or trailer during travel. The adjustable straps create a strong, secure hold and the included hardware is stainless steel, so it won't rust or corrode.
Features:
Mount to boat deck, truck bed or trailer to create a tie-down point for coolers
Stainless Steel hardware won't rust or corrode
Easy to install
In the Box:
Two (2) Tie down straps
Mounting hardware
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.19 |
|
|
Hold Down Bracket Kit for 964 Portable Toilets
Stainless Steel hold down Brackets for 964 series portable toilets.
In the Box:
Hold Down Brackets
Mounting Hardware
Legacy # 385310018
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
33.42 |
|
|
Hold Down Bracket Kit for 965
Stainless Steel hold down Brackets for 965 series portable toilets.
In the Box:
Hold Down Brackets
Mounting Hardware
Legacy # 385310239
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
42.23 |
|
|
NMEA 2000 Cable & T Connector Connection Kit for Siren 3 Pro
Optimize the connectivity of your Connected Boat® system, allowing you to monitor engine data, water, fuel and waste tanks, and more! The NMEA 2000 Connection Kit includes a 2-meter connection cable and a 3-Way Connection "T" – everything you'll need to hook up to the NMEA 2000 data system 'backbone'.
*Compatible with the Siren 3 Pro Only
|
46.16 |
|
|
Stern To Stern Combo Tie-Down Kit
The Rod Saver Stern-to-Stern Combo Tie-Down Kit is the answer to all our tie-down needs. Replace all your worn out tie-downs at one time and tow your boat without anxiety. This kit includes a pair of 4' quick-release transom tie-downs, a replacement 20' winch strap and a 30' bow tie-down. Made in USA.
|
44.38 |
|
|
ShadeFin with White Fabric, Case & Fixed Rod Holder Mount Kit
Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat.
ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.
ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling.
Features:
Light, compact and portable
Easily mounts into any standard rod holder
Kit comes with a Fixed Rod Holder Mount
Adjustable Rod Holder Mount options available
Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube
Large coverage area of 5’ X 6’
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
|
1679.99 |
|
|
ShadeFin with Black Fabric, Case & Fixed Rod Holder Mount Kit
Add an extra layer of sun protection with ShadeFin by TACO Marine that easily attaches into rod holders, tops and arches for convenient, portable shade for almost any boat.
ShadeFin’s ocean-inspired design provides expanded shade coverage for multiple areas of the boat, including fore, aft and sides of tops or anywhere there is a rod holder. ShadeFin’s fabric provides an excellent UPF 50+ rating of sun protection while boating and fishing, or when relaxing at the dock and sand bar. To anticipate the needs of many boaters, ShadeFin is available with either a fixed or adjustable rod holder mount, which inserts into any standard rod holder, or with a clamp-on mount for pipe or tube.
ShadeFin’s body houses the ribs and material, and is offered in all black or white. A protective mesh storage sleeve comes standard with the ShadeFin. To operate ShadeFin, remove the sleeve, mount to a desired location onboard and activate the underside release tabs. Structural ribs attached to weather-resistant sun-protecting fabric expand out from the body to lock the fin in place. ShadeFin is lightweight, portable and requires no drilling.
Features:
Light, compact and portable
Easily mounts into any standard rod holder
Kit comes with a Fixed Rod Holder Mount
Adjustable Rod Holder Mount options available
Clamp-on mounting options available for 3/4”, 1” schedule-40 Pipe and 1-1/4” O.D. tube
Large coverage area of 5’ X 6’
UPF (Ultraviolet Protection Factor) rating of 50+ (“Excellent” rating)
Made of high-quality anodized aluminum parts
|
1679.99 |
|
|
Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills
(1324)
Black Plastic with Gasket
Built in Lock Cylinder
Size #0 Fits PERKO Fills 1313 & 1399
Cap Outside Thread Diameter: 1-15/32"
|
31.62 |
|
|
Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills
(1324)
Black Plastic with Gasket
Built in Lock Cylinder
Size #1 Fits PERKO Fills 0520, 0527, 0528, 0557, 0599 and 1270
Cap Outside Thread Diameter: 1-7/8"
|
34.79 |
|