|
As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away.
Outside Storage?
It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.
Rinse/Flush
Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat.
Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring.
Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present.
Salt
Watch out for salt. Buy a good salt remover to minimize corrosion.
Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine.
Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4*
STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel.
Batteries
Remove the batteries from your boat and store in your garage or basement.
Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery.
If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat.
Cleaning
Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint.
Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins.
Cover Up
If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often.
https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html
and
https://www.clrmarine.com/462m4/winterizing.html
Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information.
Fair winds and smooth sailing.
To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/.
_________________________________________________________________________
Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten.
She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com
©Copyright Cheryl Kuba, 3happycampers.com, 2021.
|
|
|
Chesapeake White with Stainless Steel Bezel Boxed Set of 6 - Speed, Tach, Fuel Level, Volt, Water Temperature & Oil PSI - Inboard Motors
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured white pointer and domed glass lens.
Packaged and ready for the display counter. This 6 gauge box set offers a complete set of gauges ready to install.
Boxed Set Includes:
Speedometer (0 to 60 MPH)(GPS)
Tachometer (0 to 6000 RPM)
Fuel Level (E to F)
Voltmeter 10 to 16 AMPS)
Water Temperature (100 to 250° F)
Oil Pressure (0 to 80 PSI)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Dual Scale - Imperial and Metric
Factory P/N KTF063
*Sold as a Box Set
**Gauge Covers not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
360.59 |
|
|
Spun Silver Box Set of 6 Gauges f/ Inboard Engines - Speed, Tach, Voltmeter, Fuel Level, Water Temperature & Oil
Packaged and ready for the display counter. This 6 gauge boxed set offers a complete set of gauges ready to install.
Boxed Set Includes:
Tachometer (0 to 6000 RPM)
Speedometer (0 to 55 MPH)
Fuel Level (E to F)
Voltmeter (10 to 16 AMPS)
Water Temperature (100 to 250° F)
Oil Pressure (0 to 30 PSI)
Factory P/N KTF0184
*Sold as a Box Set
**Gauge Covers not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
266.64 |
|
|
Coral 2" Water Temperature Gauge (100 - 250°F)
Perimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer, and flat glass lens.
A temperature gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
2" - Hole Size: 2.0625" (53mm)
Specifications:
Scratch Resistant Lens
Black Aluminum Bezel
Contoured White Pointer
Dual Scale - Imperial and Metric
Factory P/N GP9461
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
28.24 |
|
|
SingleViu 52mm (2-1/16") Water Temperature Gauge - 250°F - 450-30 Ohm
SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes.
These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.
*450 - 30 Ohm Sender Required
Features:
450-30Ω Default Input
RGB LED Illumination (default illumination set to White)
Water Resistant Front & Rear
Includes Wire Harness
Molex MX 150 8 Pin Connector
Voltage 12-24V
Spin-Lok™ Mounting Hardware
Analog Input
∗Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
98.06 |
|
|
Chesapeake Black 2" Water Temperature Gauge (100-250°F)
Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
A temperature gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
2" - Hole Size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Dual Scale - Metric and Imperial
Factory P/N GP9142
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
34.06 |
|
|
Chesapeake White SS 2" Water Temperature Gauge (100-250°F)
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
A temperature gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
2" - Hole Size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Dual Scale - Imperial or Metric
Factory P/N GP9178
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
34.06 |
|
|
Dress White 2" Water Temperature Gauge (100-250°F)
Perimeter-lighted White dial with bold Black graphics, White aluminum bezel, contoured Black pointer and flat glass lens.
A temperature gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
2" - Hole Size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Can be adapted for 24 VDC systems
Dual Scale - Metric and Imperial
Factory P/N GP9120
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
27.01 |
|
|
Euro Black 2" Water Temperature Gauge (100-250°F)
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer, and flat glass lens.
A temperature gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
2" - Hole Size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Dual scale - Imperial and Metric
Factory P/N GP9118
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
24.58 |
|
|
Euro White 2" Water Temperature Gauge (100-250°F)
Perimeter-lighted White dial with bold Black graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
A temperature gauge operates by sending a low amperage current through the gauge's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
2" - Hole Size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
Perimeter-lighted White dial
12 VDC negative ground
Can be adapted for 24 VDC systems
Dual Scale - Metric and Imperial
Factory P/N GP9119
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
25.06 |
|
|
Kronos 2" Water Temperature Gauge (100-250°F)
Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed. All instruments include two piece Newport pointer with White hub.
A temperature gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc.
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
2" - Hole Size: 2.0625" (53mm)
Specifications:
Flat Scratch Resistant Lens
Polished Stainless Steel bezel
LED Illuminating around the Perimeter of the Dial
Newport style White Pointer
Dual Scale - Imperial and Metric
Factory P/N GP7682
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
36.66 |
|
|
Chesapeake Black w/Stainless Steel Bezel Boxed Set of 6 - Speed, Tach, Fuel Level, Voltmeter, Water Temperature & Oil PSI - Inboard Motors
Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Packaged and ready for the display counter. This 6 Gauge Boxed Sets offer a complete set of gauges ready to install.
Boxed Set Includes:
Speedometer (0 to 60 MPH) (GPS)
Tachometer (0 to 6000 RPM)
Fuel Level (E to F)
Voltmeter 10 to 16 AMPS)
Water Temperature (100 to 250° F)
Oil Pressure (0 to 80 PSI)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Dual Scale - Imperial and Metric
Factory P/N KTF064
*Sold as a Box Set
**Gauge Covers not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
360.59 |
|
|
Platinum 4" Multi-Function - Fuel, Oil, Volt & Water Temperature
Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.
All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.
Multi-Function Gauge Displays:
Fuel (E-1/2-F)
Voltmeter (10 - 18 VDC)
Oil Pressure (0 - 80 PSI)
Water Temperature (100 - 250° F)
4" - Hole size: 3.375" (85mm)
Specifications:
Domed Glass Anti-fog, Scratch Resistant Lens
Stainless Steel Bezel
Blue LED Illuminating around the Perimeter of the Dial
Illuminated Backlit Fire-Orange Tip Pointer
Factory P/N GF0417
*Sold as an Individual
*Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
165.47 |
|
|
Cockpit Marine 52mm (2-1/16") 250°F Water Temperature Gauge - Black Dial/Bezel
VDO Cockpit Marine offers a comprehensive modular, modern series of instruments for engine monitoring. More functions and greater flexibility in installation and design increase the scope for high manufacturing standards and guarantee the highest level of reliability and readability.
As the result of ongoing research and development work, VDO Cockpit Marine gauges offer an innovative, comprehensive standard instrumentation platform. VDO Cockpit Marine gauges provides maximum freedom to customize the cockpit and is the natural choice for an attractive price and performance ratio.
Features:
100F-250° F range
Works with all 450-29 Ohm common marine temperature senders
For 12V electrical systems
Connection: M4 Stud
Mounting Hardware: Included
Input Type: Analog
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.43 |
|
|
Euro Black 2" Water Temperature Gauge - Metric (40° to 120° C)
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
A temperature gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc...
As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the temperature.
2" - Hole Size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Perimeter-lighted Black dial
Can be adapted for 24 VDC systems
Factory P/N GP9124
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
26.14 |
|