4MP HD-TVI Mini IR Turret with 2.9mm Lens - Grey Monitor your property with the miniature dark-gray aluminum 4MP Outdoor HD-TVI Mini-Turret Camera with Night Vision from Speco Technologies. Featuring a 4MP CMOS sensor and a 2.9mm fixed lens, this camera transmits video at resolutions up to 2560 x 1440 at 15 fps. The camera is equipped with IR LEDs for up to 35' of night vision, enabling you to capture video in even total darkness. Designed for outdoor use, the camera is housed in an IP66-rated weather-resistant enclosure. The UTC (Up-the-Coax) connection allows for OSD control of the camera. Features: Up to 2560 x 1440 resolution video at 15 fps over coax 12 built-in IR LEDs for up to 35' of night vision Signal distance up to 1600' Progressive scanning system Automatic gain control Automatic white balance Internal synchronization Runs on 12 VDC (power supply available separately) Vandal-resistant cast aluminum enclosure IP66 rated for outdoor use FCC and RoHS certified Miniature form factor, suitable for use in vehicles

4MP HD-TVI Mini Turret Camera 2.9mm Lens - White Housing Features: 2.9mm fixed lens 1/3” Progressive Scan CMOS, 4MP Compact size – only 2.36” in diameter! 12 IR LEDs Cast aluminum construction Signal distance up to 1600 feet Full OSD operation via UTC (TVI output only) Vandal resistant IP66 compliant, weather resistant 12VDC operation 5 year warranty *Also available in dark gray housing

March 0150-0125-0200-2.50 Imp Mag Assy Encap W/2.50  

March 0150-0125-0200-2.582 Imp Mag Assy W/2.582 Trim  

HD-TVI Intensifier In/Out Turret Camera with Motorized Lens Features: Full HD resolution over coax (HD-TVI) Supports up to Full HD 1080p @ 30fps  True WDR operation Superior low-light performance Amplify existing light with no distance limitation Presets: Outdoor, Low Light, Hallway, Lobby, Elevator, Indoor Built-in heater and anti-fog glass reduce condensation 3-axis for wall and ceiling mounting Full OSD operation through on-board control and UTC (up the coax) Additional 960H analog output Signal distance up to 1600 feet* Vandal / tamper resistant IP67 compliant, weather resistant 12VDC & 24VAC dual voltage operation 5-year warranty Technical Specifications: Output Resolution - 1920x1080 @ 30fps Power - 12VDC / 24VAC  Power Consumption - 150mA (DC), 2W (AC)  Operating Temperature - -4° F – 122° F  Signal Distance - Up to 1600 feet (depending on coax quality)* 

HD-TVI 2MP Color Waterproof Marine Bullet Camera with IR, 10' Cable, 3.6mm Lens, White Housing Features: 3.6mm fixed lens Full HD resolution over coax (HD-TVI) Full HD 1080p @ 30fps Great for marine applications Additional analog output for 960H Full OSD operation via UTC (TVI only)_ 12VDC / 24VAC dual voltage operation 5-Year warranty

HD-TVI Waterproof Mini Bullet Color Camera - Black Housing - 3.6mm Lens - 30' Cable Features: Underwater operation to a maximum 30' depth Additional analog output for 960H Full OSD operation through onboard UTC (up the coax) IP67 compliant, weather resistant 5 year warranty

2MP Ultra Intensifier® HD-TVI Dome Camera 3.6mm Lens - Dark Grey Housing with Included Junction Box Features: Next generation of Intensifier® technology provides an even more vivid color image in low light situations Preset image modes offer convenient settings for different environments Supports up to full HD 1080p resolution @ 30fps True WDR (wide dynamic range) operation Glacier: Operates in -40º F IP66 compliant, weather resistant IK10 compliant, vandal resistant TAA Compliant Junction box included for convenience 5 year warranty

4MP H.265 AI Bullet IP IR Camera - 2.8mm Lens & Junction Box Features: Supports up to 4MP @ 30fps Built-in standard PoE (IEEE 802.3af) H.265/H.264/MJPEG compression supported True Day/Night operation (IR cut filter) Adaptive IR LEDs reduce IR saturation IR range: Up to 100 FT (depending on scene reflection) Micro SD slot up to 256GB (card not included) True WDR (wide dynamic range) operation IP67 compliant, weather resistant Junction box included (works with NPT/BSP specifications) Conformant with ONVIF Profile G/S/T 5-year warranty UL-listed NDAA Compliant Technical Specifications: Power - DC Jack Maximum Resolution - 2592 x 1520  Field of View - 95.3°(H) , 53.2°(V), 115°(D)  White Balance - Auto, Indoor, Outdoor, Manual  Operating Temperature - -40°F 140°F  Unit Dimensions - 2.9” (W) x 2.9” (H) x 6.6” (D)  Unit Weight - 1 lb.

2MP HD-TV1 IR Bullet Camera with Junction Box Features: Supports up to 2MP @ 30fps Full HD resolution over coax Supports HD-TVI, CVI, AHD, and 960H Analog IR Range: 165’ (depending on scene reflection) 12VDC Operation (power supply not included) IP67 compliant, weather-resistant Junction box included Housing color: White Megapixel: 2MP

High Definition 3MP IP Mini Dome Camera - 2MP Resolution - 316 Stainless Steel & 120-Degree Horizontal Field of View - 2.8mm Lens Iris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application. The IRIS-S460 is a high-definition 3MP IP camera that is directly compatible with Raymarine chart plotters (running LH2 / LH3 software), Navico MFDs (Simrad, Lowrance, B & Gs), and Furuno Timezero software v4.1 and above. Compatible with Garmin via the CMAC series of switchers, interfaces, and recorders. The IRIS-S460 features built-in Power over Ethernet (PoE) or 12VDC operation and is ONVIF compliant, supporting multiple streams, variable bitrates, and a host of image settings, including image mirror and flip, color, contrast, and brightness settings. The S460’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment and is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger's vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts. Measuring only 58mm high by 60mm in diameter, the S460 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells. Built-in infrared LEDs operate automatically via a day/night filter to provide illumination up to 10 meters at night and in low-light conditions. Whether you need a high-quality and rugged camera as part of your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, the IRIS-SX60 range of cameras is the perfect solution. Features: Marine Grade 316 Stainless Steel rugged corrosion-free case Compatible with Raymarine / Axiom chart plotters running LH2 and higher Compatible with Simrad, Lowrance & B & G Compatible with Furuno software running TZ4.1 and above Garmin Compatibility in conjunction with CMAC Systems High polish finish Built-in infra-red LED illumination (10m Range) PoE & 12VDC connections Extremely low power consumption IP66 environmental protection Specifications: Lens (millimeter): 2.8mm Horizontal Field of View: 120-degree HFOV Sensor (inch): 1/4” CMOS Sensor Resolution: Variable - 1920x1080P (2MP) max Interface: RJ45 10/100 base t ethernet Video Processing: H.264 Codec / dual stream Protocols/Video Format: TCP/UDP/HTTP/Multicast/UPnP/NTP/RTSP/ONVIF Onvif: Profile S v2.4 Bitrate: VBR / CBR 32kbps 8Mbps Illumination: 6 x 850nm infra-red - 10-meter range Lens/Field of View: 2.8mm option Mirroring: Horizontal & vertical - configure via browser Automatic Gain control: Supported / multiple levels Compatibility:  Raymarine / Axiom (LH2 or higher), NAVICO MFDs inc SIMRAD / LOWRANCE, B & G, Furuno Timezero v4.1 and higher. PC-based systems, MFDs with digital (HDMI / DVI) Input, MFDs via IRIS NVR/HVR, IE Browser, CMAC systems Operating Temperature: -30 +60 Connections: Water-resistant RJ45 Socket / non-PoE with DC power socket Material: 316 Stainless Steel Power: PoE IEEE802.3af / 12VDC <200mA max. Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H Environmental: IP66

RAM® Torque™ 3/8" - 5/8" Diameter Mini Rail Base w/ 1" Ball, Medium Arm and Diamond Ball Base Take your mobile entertainment on the road with the new RAM® Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1" ball base that accommodate bars 3/8" to 5/8” in diameter with a B-sized standard length arm and diamond base so that you can connect any of the RAM Mounts cradles or anything else with the AMPS hole pattern. Sizing inserts are included to provide a snug fit and offer additional protection for the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments. This low-profile mount is the perfect way to secure your personal electronics and small accessories in any high-vibration environment. Mounting Base Dimensions: Accommodates rails 3/8" to 5/8" in diameter  Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 0.56 lbs.

Poly-Flex II Fishing Chair Cover - Fits up to 15"H x 20"W x 20"D - Grey Specifically designed to protect Fishing Chairs from harmful UV damage, dirt and environmental hazards. Enjoy a clean seat each time the boat is used with this convenient accessory. Each cover has a durable 1/8″ braided rope in the hem with cord lock for a secure fit. Available in Sunbrella®, Performance Poly-Guard® & Sun-DURA®. Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Poly-Flex II Captain's Chair Cover - Fits up to 32″H x 26″W x 25″D - Grey Specifically designed to protect a Captain’s Chair from harmful UV damage, dirt and environmental hazards. Enjoy a clean seat each time the boat is used with this convenient accessory. Each cover has a durable 1/8″ braided rope in the hem with cord lock for a secure fit. Available in Sunbrella®, Performance Poly-Guard® & Sun-DURA®. Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Poly-Flex II Small Center Console Universal Cover - 40"D x 33"W x 36"H - Grey *Measurements - 40"D x 33"W x 36"H The design now accommodates the forward console seat.  We’ve added a heavy-duty adjustable strap system for a more customized fit and heavy-duty shock cord in the hem to keep the cover securely in place. Available in all of our boat cover fabrics to match your boat cover. Poly-Flex II Good Quality Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). *For storage and mooring only. Not recommended for trailering.