MSD Fitting f/Small Tank 970 Series Toilets Replaces MSD fittings for Series 974 MSD models.  Converts Series 972 and 974 - 2.6 gallon models to MSD toilets. *Sold as an Individual  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MSD Fitting f/Large Tank 970 Series Toilets Replaces MSD fittings for Series 975 MSD models.  Converts Series 975 and 976 - 5 gallon models to MSD toilets. *Sold as an Individual  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

45° Adjustable Fitting for Back of UP Series Helms Typical Application: Fitting for the back of the UP series helms Specifications: ORB, Size #6 to 3/8 COMP FITTING Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

90° Adjustable Fitting for Back of UP Series Helms Typical Application: Fitting for the back of the UP series helms Specifications: ORB, Size #6 to 3/8 COMP FITTING Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Union T-Fitting f/3/8" Tube Compression Hose Fittings Union T-Fitting for 3/8" Tube Typical Applications:  T-Fitting for 3 standard 3/8" compression thread hose fittings  Specifications: 3/8 COMP FITTING ALL Sides = 9/16 - 24 UNEF 2A

Powertech T-Fitting f/Mercury-Style ORF Hoses Typical Application: 3-Way ORF fitting for mercury style ORF hoses

Perko 1" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad Flange Technical Information: Hose Size Inches: 1 Mounting Hole Diameter Inches: 1-1-5/16 Maximum Hull Thickness Inches: 1-1/2 O.D. Flange Inches: 2-1/4 Model Number: 0328DP6 Ship Weight: 2.0/7.3 lbs. MADE IN THE USA

Perko 1-⅛" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad Flange Technical Information: Hose Size Inches: 1-1/8 Mounting Hole Diameter Inches: 1-1/2 Maximum Hull Thickness Inches: 1-1/2 O.D. Flange Inches: 2-1/4 Model Number: 0328DP6A Ship Weight: 2.0/7.0 lbs. MADE IN THE USA

3/4" Thru-Hull Fitting f/Hose - Plastic Narrow Flange Features: Molded white Narrow Flange Specifications: Hose Size: 3/4" Mounting Hole Diameter: 1" Max. Hull Thickness: 1-7/16" O.D. Flange: 1-1/2"

Perko 1/2" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad Flange Technical Information: Hose Size Inches: 1/2 Mounting Hole Diameter Inches: 13/16 Maximum Hull Thickness Inches: 1-1/4 O.D. Flange Inches: 1-1/2 Model Number: 0328DP4 Ship Weight: 1.0/5.8 lbs. MADE IN THE USA

Perko 5/8" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad Flange Technical Information: Hose Size Inches: 5/8 Mounting Hole Diameter Inches: 13/16 Maximum Hull Thickness Inches: 1-1/4 O.D. Flange Inches: 1-1/2 Model Number: 0328DP4A Ship Weight: 1.0/6.1 lbs. MADE IN THE USA

Perko 3/4" Thru-Hull Fitting f/ Hose Plastic Molded White Plastic Broad Flange Technical Information: Hose Size Inches: 3/4 Mounting Hole Diameter Inches: 1 Maximum Hull Thickness Inches: 1-7/16 O.D. Flange Inches: 1-7/8 Model Number: 0328DP5 Ship Weight: 1.3/9.1 lbs. MADE IN THE USA

"Off the Boat" Rock Strainer This strainer replaces the existing foot on the pump and prevents small rocks from damaging the foot valve. Fits 124, 136 and 300 series pumps. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Engine Mount Kit - 4 Engine Mounts f/Small Yanmar Engines (Yanmar*) * Suitable for the Yanmar 1GM, 2GM, 3GM, 3YM, 3HM and 3JH series engines The R & D Marine Engine Mounts are designed specifically for the rigors of marine applications. The mounts are stiff enough to absorb forward and reverse propeller thrust, yet soft enough to isolate drivetrain vibrations from the hull. To help increase the longevity of the mounts, all steel parts are zinc plated and pasivated to limit corrosion. The rubber component is covered by an oil shield to protect it from petroleum based products. R & D Marine mounts are preloaded based on the combined engine and transmission weight to limit engine movement. To facilitate in the ease of installation the mounts are height adjusting and the mounting holes in the base of the mount are slotted to assist in alignment of the drivetrain. How To Select (details required): 1.Define the total weight of the engine and the transmission. 2.Determine 60% of the total weight and then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the tranmission side of the engine). 3.Determine 40% of the total weight and then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the tranmission side of the engine). 4.Determine the stud necessary stud diameter and footprint of the mount. 5.Choose mount most appropriately sized for the per mount weight. When possible, choose the mount nearest the middle of the weight range. Example: Engine weight is 480lbs., transmission weight is 110lbs., footprint is 4", stud diameter is 5/8". Total weight is 590lbs. 590 x .6 / 2 = 177 lbs per rear mount. Mounts required are 800-010 590 x .4 / 2 = 118 lbs per rear mount. Mounts required are 800-037 Why R&D Marine Engine Mounts? Designed for marine use, accepts propeller and engine thrust in both directions Offers a fail safe design R & D Marine Mounts are height adjustable Pre-loaded to reduce movement Slotted holes in base to assist in alignment Mount types to fit all applications

Flared Top Saddle f/Small T-Cleat & C-Cleat Features: Used to keep the uncleated line within close proximity to the cleat, facilitating recleating Suits small C-Cleat and T-Cleat Grade 316 stainless steel