Compatible Vehicles: Freightliner Trucks International Trucks Kenworth Trucks Mack Trucks Peterbilt Trucks Volvo Trucks Placement of Mount: Passenger side on the floor, under front seat Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket/Bench Material: Powder Coated Steel Weight: 10.8 lbs. Features: Quick installation with no drilling needed. Notes: If the heater box is under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty. May not work with swivel style seats for big rigs.

No-Drill™ Vehicle Base f/ '13-21 Ford Fusion + More The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Compatible Vehicles: Ford Edge (2007-2013) Edge Limited (2013) Edge SE (2013) Edge SEL (2013) Edge Sport (2013) Fiesta (2015) Fusion (2013-2021) Placement of Mount: Passenger side on the floor, under front seat Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: Powder Coated Steel Weight: 6 lbs. Features: Quick installation with no drilling needed

No-Drill™ Vehicle Base f/ '10-13 Ford Transit Connect + More Compatible Vehicles: Ford Transit Connect (2010-2013) Transit Connect Wagon Premiun (2013) Transit Connect XL Van (2013) Transit Connect XLT Van (2013) Transit Connect XLT Wagon (2013) Dodge Grand Caravan (2008-2009 2012-2016) Grand Caravan AVP (2013) Grand Caravan Crew (2013) Grand Caravan RT (2013) Grand Caravan SE (2013) Grand Caravan SXT (2013) RAM C/V Tradesman Van (2014-2015) Chrysler Town & Country (2008-2009 2012-2016) Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Pole: Purchased Separately Weight: 4.5 lbs. Material: Powder Coated Steel

No-Drill™ Vehicle Base for '05-18 Toyota 4Runner & Tacoma The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle.  Features: Material: Powder Coated Steel Placement of Mount: Passenger side on the floor, under front seat Drilling Requirements: None - attaches to seat bolts Seat Configuration: Bucket Pole: Purchased Separately Weight: 9.0 lbs. Note: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty. The RAM-VB-138 will not fit bench seat trucks. This base is not compatible with bench seat vehicles.

No-Drill™ Laptop Base f/ The Dodge RAM 1500-5500 - 2008-2015 Specifications/Features Compatible Vehicles: Dodge RAM 1500-5500 (2008-2015) Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board. Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Pole: Purchased Separately Weight: 2.1 lbs. Material: Powder Coated Steel Features: Quick installation with no drilling needed. Rock solid construction with lifetime warranty. Low profile keeps mount away from passenger leg space. Won't interfere with levers or factory-installed console or 4WD lever. Designed to accommodate trucks with PTO

No-Drill™ Laptop Base f/'17-20 Ford F-Series + More The RAM No-Drill™ laptop mounting base for the 2015 Ford F-150 features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Features: Placement of Mount: Passenger side, in front, where seat frame meets floor board Drilling Requirements: None. Utilizes existing vehicle mounting points and hardware Seat Configuration: Bucket Pole: Purchased Separately Material: Powder Coated Steel Custom, No-Drill™ mounting base offers lowest profile in the industry Manufactured from high strength steel with a durable powder coat finish If required, high quality fastening hardware is included Mounts using existing seat bolts, no drilling required Compatible Vehicles: Dodge Journey (2011-2018) Ford F-150 (2015-2020) F-250-F-550 (2017-2020) Escape (2013-2019) Expedition (2018-2019) Transit Connect (2014-2020) C-Max (2014-2018) Focus (2011-2018) Raptor (2015-2020) Jeep Compass (2013-2018) Patriot (2013-2017)

No-Drill™ Laptop Base f/ '97-16 Ford F-250, F-350, F-450, F-550, F-650, F-750 & Excursion The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the front bench or passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Compatible Vehicles: F-250 (1997-2016) F-350 (1997-2016) F-450 (1997-2016) F-550 (1997-2016) F-650 (1997-2018) F-750 (1997-2018) Excursion (2000-2005) Placement of Mount:  Passenger side floor board, in front of seat DRILLING REQUIREMENTS: No - attaches to seat studs Seat Configuration:  Bucket Pole:  Purchased Separately Material: Powder Coated Steel

RAM® No-Drill™ Vehicle Base for 2019 RAM 1500 This heavy duty, steel RAM® No-Drill™ laptop vehicle base is custom-designed for the 2019 Dodge RAM 1500. Using the passenger side seat rail bolts as attachment points, provided hardware is used to secure the mounting base in the vehicle. Specifications: Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Pole: Purchased Separately Material: Powder Coated Steel

Compatible Vehicles: Freightliner Trucks International Trucks Kenworth Trucks Mack Trucks Peterbilt Trucks Volvo Trucks This No-Drill™ Big Rig Laptop Stand installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens). The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Material: High Strength Composite and Powder Coated Steel Notes: If the heater box is under the seat, the installer may need to drill holes in the base to accommodate vehicle mounting holes or studs. Also, the heater box may cause the system to sit higher than normal. Pole may be cut down by installer to lower kit. This will not void the warranty. May not work with swivel style seats for big rigs If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

No-Drill™ Vehicle Base for '07-13 Chevrolet Silverado + More The RAM® No-Drill™ laptop mounting base features a heavy-duty steel mounting base custom designed to fit this vehicle perfectly. Using the passenger side seat rail bolts as attachment points, existing hardware is used to secure the laptop mount base in the vehicle. Placement of Mount: Passenger side floor board, in front of seat Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Hole Pattern: Seat Bolt Distance: 15"-15.5625" center to center Pole: Purchased Separately Material: Powder Coated Steel Features: Quick installation with no drilling needed. Rock solid construction with a lifetime warranty Compatible Vehicles Chevrolet Avalanche (2007-2013) Avalanche LS/LT/LTX (2009) Silverado (2007-2013) Silverado 1500 (2007-2013) Silverado 1500 Hybrid (2008) Silverado 1500HD (2008) Silverado 2500HD (2007-2013) Silverado 3500HD (2007-2013) Suburban (2007-2014) Suburban 12-Ton (2012) Suburban 34-Ton (2012) Tahoe (Front Bucket Seats Only) (2007-2014) GMC Sierra (2007-2013) Sierra 1500 (2007-2013) Sierra 1500 Denali (2012) Sierra 1500 Hybrid (2008 2012) Sierra 1500HD (2008) Sierra 2500HD (2007-2014) Sierra 2500HD Denali (2007-2012) Sierra 3500HD (2007-2014) Sierra 3500HD Denali (2007-2014) Sierra Hybrid (2011) Yukon (2007-2014) Hummer H2 (2003-2011)

RAM Mount No Drill Vehichle System f/Nissan NV1500, NV2500HD, NV3500HD &  Toyota Tundra This No-Drill™ Laptop Stand System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. This configuration provides a telescoping feature that ranges from 12 to 18 inches. Dual swing arms provide articulation and 12 inches of reach for passenger and driver access to the mounted device. Patented rubber ball and socket joint provides additional adjustment as well as shock and vibration isolation. The RAM Tough Tray™ is spring loaded to accommodate 10" to 16" wide laptops & (17" wide screens) The tray features four adjustable retaining arms with rubber grip feature. These arms can be moved both vertically and horizontally. This allows for a custom fit for varying thicknesses of laptops and the freedom of not blocking ports or drives. A screen support and USB light are also available to accessorize the tray. Hole patterns on perimeter of tray facilitate the mounting of additional RAM systems to support GPS or other electronics. Compatible Vehicles: Nissan NV1500 (2011-2021) Nissan NV2500 HD (2011-2020) Nissan NV3500 HD (2011-2020) Toyota Tundra (2007-2021) Features: Placement of Mount: Passenger side, front, where seat rail frame attaches to floor board. Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Material: High Strength Composite and Powder Coated Steel Notes: If the Tough-Tray™ Laptop Cradle is intended to hold a laptop or device while the vehicle is in motion, we recommend the Secure-N-Motion™ kit.

No-Drill Laptop Base for the Ford Explorer and Police Interceptor Utility Compatible Vehicles: Ford Explorer (2011-2012) Ford Police Interceptor Utility (2013) Placement of Mount: Passenger side floor board, in front of seat Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Pole: Purchased Separately Material: Powder Coated Steel Notes: Utilizes existing vehicle hardware. Plastic trim may be re-installed once the No-Drill base has been secured into vehicle.

No-Drill™ Laptop Base f/RAM Promaster & Promaster City This No-Drill™ base installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rails. Placement of Base: Passenger side between seat track and seat frame box or floor board Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Seats. The RAM-VB-129-A will not work for bench/tube frame seats. For bench seat or tube frame seat model vehicles, consider the use of the RAM-VB-184T. Material: Powder Coated Steel

No-Drill Laptop Base for the Dodge Challenger, Charger, Magnum, Sprinter Van, Freightliner Sprinter Van & Mercedes Sprinter Van Compatible Vehicles:  Chrysler 300 (2011-2021) Dodge Challenger (2011) Charger (2005, 2011-2021) Charger Police Package (2005, 2011-2021) Magnum (2005) Magnum Police Package (2005) Sprinter Van (2007-2011) Freightliner Sprinter Van (2010-2020) Mercedes Metris (2016-2021) Sprinter Van (2010-2019) Ram Promaster (2014-2021) Promaster City (2014-2020) Placement of Mount:  Passenger side on the floor, in front of seat Drilling Requirements:  No - uses existing seat bolts Seat Configuration:  Bucket Pole:  Purchased Separately Weight:  4.9 lbs. Material: Powder Coated Steel Features:  Quick installation with no drilling needed. Rock solid construction with a lifetime warranty.

No-Drill Laptop Base for the Ford Police Interceptor Sedan Compatible Vehicles: Ford Police Interceptor Sedan (2013) Ford Taurus (2013) Placement of Mount: Between the seat cushion and seat frame on passenger side Drilling Requirements: No - attaches to seat studs Seat Configuration: Bucket Pole: Purchased Separately Weight: 3.5 lbs. Material: Powder Coated Steel