|
Neat Cleat Stainless Steel - 6"
A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.
Features:
Depth: 3-1/8 in.
Height: 1-5/8 in. (lowered)
Backed by a lifetime warranty against corrosion
Size: 6 in. L x 1-1/2 in. W
|
66.60 |
|
|
Quick Cleat - Stainless Steel - 3/8"
The Barton Marine Quick Cleat range is perfect for novices and seasoned mariners and takes the place of tying and releasing knots. The heavy-duty version is made of 316-grade Stainless Steel and is suited for marina use, larger yachts and ships, workboats, catamarans, and fishing boats to hold marine and boat gear securely on lines up to 5/16" (10 mm.)
The Barton Marine Quick Cleat offers exceptional value and takes the stress out of tying knots.
Quick Cleats are easy to use. Simply rotate the lever on top of the cleat, insert the line and release the lever which secures the rope. Quick Cleats are designed to alter rope tension in one direction but grip the rope firmly and securely in the other.
Securely hold fenders, tender and painter lines, Ribs, buckets, boat gear and equipment, covers, trampolines and water toys of all kinds.
Features:
Easy to use
Quality engineered and manufactured
Technical Specifications:
Material - Marine-grade 316 Stainless Steel
Working Load -1,188 lb (540 kg)
Maximum Rope Diameter - 5/16" (10 mm)
Height - 1" (2.4 cm)
Weight - 9.9 oz (280 g)
*Sold as an Individual
|
98.33 |
|
|
6" Folding Cleat - Stainless Steel
Features:
Folding Cleat Made with 316 Stainless Steel
Length - 6"
For top mount applications where depth under the deck is a concern
|
44.22 |
|
|
Folding Cleat - Stainless Steel Studded - 6"
Overall Length: 6"
Cleat Length: 6"
Depth: 1-5/8"
Overall Width: 1-7/8"
|
50.53 |
|
|
Mid-Rail Chock/Cleat Stainless Steel
Schaefer T-Track Chock cleats will fit Schaefer T-Track measuring 1" wide, 3/8" overall height, 1/8" "T" thickness and a base width of 1/2". They will not fit earlier versions of T-Track or some competitors models.
Specifications:
Length 6-1/2" (165 mm)
ID 1-7/16" (180 mm)
Line Size 1/2" (13 mm)
Track 1" x 1/8" (25 mm x 3 mm)
Pin. Size 1/4" (6 mm)
SWL 2500 lbs. (1140 kg)
Weight .9 lb. (.41 kg).
|
157.38 |
|
|
V-Jam Cleat - Stainless Steel - 6mm(1/4") Max Line Size
A stainless steel jam cleat useful for jamming small diameter, low load lines. Ideal for dinghy halyards and outhauls, flag halyards, etc
|
15.24 |
|
|
4-1/2" Folding Cleat - Stainless Steel
Features:
Folding Cleat Made with 316 Stainless Steel
Length - 4-1/2"
Height - Closed - 1/2", Open - 1-1/2"
Fastener- 1/4" (2) - Not Included
Overall body length - 4-9/16"
Overall body width - 1-9/16"
For top mount applications where depth under the deck is a concern
|
24.52 |
|
|
Folding Cleat - Stainless Steel Studded - 4-1/2"
Overall Length: 4-9/16"
Cleat Length: 4-1/2"
Depth: 1-5/8"
Overall Width: 1-3/8"
|
33.42 |
|
|
Mid-Rail Chock/Cleat Stainless Steel - 1-1/4"
Chock cleats will fit Schaefer T-Track measuring 1-1/4" wide, 7/16" overall height, 3/16" "T" thickness and a base width of 11/16". They will not fit earlier versions of T-Track or some competitors models.
Specifications:
Length 7-1/2" (190 mm)
ID 1-3/4" (45 mm)
Line Size 5/8" (16 mm)
Track 1-1/4" x 3/16" (31 mm x 4.6 mm)
Pin. Size .355
SWL 4500 lbs. (2045 kg)
Weight 1.5 lbs. (.68 kg)
|
167.51 |
|
|
Fender Cleat - 3-1/2"
The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable, enhanced cast 316 stainless steel it's simple design assures long-life and dependable operation.
Total Length: 3-1/2"
Total Width: 1-3/16"
Above deck-lowered/closed): 9/16"
Above deck- raised/open: 1-3/8"
Maximum Line Opening (adjusting heights): 3/4"
Install Depth: 1-7/8"
Mounting Hole Distance: 1-11/16"
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
20.52 |
|
|
Sure-Grip Stainless Steel Rod Holder - 4" & 5-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 5-degrees
Stem Length: 4 inches with wing nut
Use for: Horizontal rod position
Includes: 5071 mounting base
|
9.00 |
|
|
Sure-Grip Stainless Steel Rod Holder - 8" & 5-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 5-degrees
Stem Length: 8 inches with wing nut
Use for: Horizontal rod position with added clearance
Includes: 5071 mounting base
|
14.57 |
|
|
Sure-Grip Stainless Steel Rod Holder - 4" & 25-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 25-degrees
Stem Length: 4 inches with wing nut
Use for: Drifting or trolling
Includes: 5071 mounting base
|
14.57 |
|
|
Sure-Grip Stainless Steel Rod Holder - 4" & 45-Degree Angle
Attwood’s line of Sure-Grip Steel Rod Holders is the perfect complement to Attwood’s molded Pro-Series and Heavy-Duty Adjustable rod holders. They are designed for drift fishing, pan fishing, crappie, and more. The 3/8-inch diameter coated steel rod is tough, strong, and corrosion-resistant. Also, the UV-resistant plastic coating protects the rod butt and handle.
Specifications:
Angle: 45-degrees
Stem Length: 4 inches with wing nut
Use for: Trolling
Includes: 5071 mounting base
|
15.43 |
|
|
Lift Ring/Cleat
Length:6" (16cm)
Eye Diameter: 1-1/8"(3cm)
Max Load: 4,000lbs
Fastener:#10
Material: 316 Stainless Steel
|
43.75 |
|