|
Ring Buoy Holder with 60' Heaving Line
Features:
Ring holder is constructed from anodized aluminum
Fits all sizes of ring buoys
Comes complete with 60' mildew resistant, white U.V. polypropylene floating heaving line with attached rope float
Float also sold separately for use with swim area floating ropes or nets
Accommodates rope up to 3/8" in diameter
|
19.16 |
|
|
Ring Buoy Holder w/30' Heaving Line
Features:
Ring holder is constructed from anodized aluminum
Fits all sizes of ring buoys
Comes complete with 30' mildew resistant, white U.V. polypropylene floating heaving line with attached rope float
Float also sold separately for use with swim area floating ropes or nets
Accommodates rope up to 3/8" in diameter
|
14.66 |
|
|
RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post, Combination Bulkhead/Flat Surface Base & Plunger
The RAP-394-SSBMPU consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and combination/bulkhead/flat surface mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The combination bulkhead/flat surface mounting base can be installed on a flat surface such as the deck or on a vertical surface. This mounting base features a locking feature which requires the release of a plunger to remove the rod holder. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water.
Features:
Quick release and installation
High strength materials ensure product longevity
Compatible with all RAM & 3rd party post spline bases
Compatible with spinning reels and level wind reels
Ratchet system allows for multiple articulation points
Lanyard tie points for extra security
Custom designed for heavy chop environments
Mount virtually anywhere on heavy rigged kayaks without hinderance
Lifetime warranty
Made in U.S.A.
Dimensions:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
Material:
High Strength Composite
Notes:
The "U" in the part number reflects product packaged in poly bag.
|
24.85 |
|
|
RAM Tough-Tube Fishing Rod Holder w/3" Length Spline Post & Flush Mounting Base
The RAP-394-SSF consists of the TOUGH-TUBE fishing rod holder, 3" long ratchet spline post arm and square flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The flush mounting base contains 4 pre-drilled holes and a female socket for spline post arms. Ideally suited for anything from Kayaks to Tournament boats, this compact and simply design is ready for your next day on the water.
Features:
Quick release and installation
High strength materials ensure product longevity
Compatible with all RAM & 3rd party post spline bases
Compatible with spinning reels and level wind reels
Ratchet system allows for multiple articulation points
Lanyard tie points for extra security
Custom designed for heavy chop environments
Mount virtually anywhere on heavy rigged kayaks without hinderance
Lifetime warranty
Made in U.S.A.
Dimensions:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
Material:
High Strength Composite
Notes:
Part number reflects product packaged in clear clam shell for store shelf display.
|
23.76 |
|
|
Ring Buoy Throw Bag - 90' Rope
Throwline to attach to ring buoy for safe deployment.
Features:
Includes storage bag with cinch strap
Polypropylene floating rope
Technical Specifications:
Rope Material - Polypropylene
Rope Length - 90' (27.4 M)
Rope Size - .38" (.965 cm)
Tensile Strength - 1,900 lb (862 kg)
Weight (including bag): 1.65lbs (750 g)
*Sold as an Individual
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE),N,N-Dimethylformamide which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
42.10 |
|
|
RAM® Tough-Tube Fishing Rod Holder with 3" Length Spline Post & Round Flush Mounting Base
The RAP-394-SSFMTU consists of the TOUGH-TUBE fishing rod holder, a 3" long ratchet spline post arm, and a round flush mounting base. The ratcheting feature allows for the tube to tilt forward and back 180 degrees for optimum viewing angles. The round flush mounting base is designed to accommodate gunwales up to two inches thick, and seat with no visible hardware, this product is ideally suited to a wide variety of applications. Once installed, the post spline can be removed and the hole capped making it watertight. Ideally suited for anything from Kayaks to Tournament boats, this compact and simple design is ready for your next day on the water.
Features:
Quick release and installation
High-strength materials ensure product longevity
Compatible with all RAM & 3rd party post spline bases
Compatible with spinning reels and level wind reels
The Ratchet system allows for multiple articulation points
Lanyard tie points for extra security
Custom-designed for heavy chop environments
Mount virtually anywhere on heavily rigged kayaks without hindrance
Material: High Strength Composite
Notes: The "U" in the part number reflects the product packaged in a poly bag.
Lifetime warranty
Made in U.S.A.
Specifications:
Inner diameter: 1.9"
Inner tube length: 10" (from bottom to top of lip)
Post Spline Length: 3"
|
29.47 |
|
|
Foam Ring Buoy - 20" - White w/White Grab Line
Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape.
Minimum Buoyancy 16.5lbs
SOLAS - "Saving of Lives at Sea"
SOLAS approved ring suitable for quick release from the bridge.
SOLAS approved
|
70.62 |
|
|
Foam Ring Buoy - 24" - White w/White Grab Line
Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape.
Minimum Buoyancy 16.5lbs
SOLAS - "Saving of Lives at Sea"
SOLAS approved ring suitable for quick release from the bridge.
SOLAS approved
|
89.44 |
|
|
White 30" Foam Ring Buoy w/White Grab Line
Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy.
Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line.
SOLAS approved models equipped with reflective tape.
Minimum Buoyancy 32 lbs
Features:
Vinyl skin life rings can be painted or numbered with excellent adhesion
For both recreational and commercial use
Most durable life ring on the market
Vinyl skin is more puncture resistance and less likely to tear or scuff
All life rings meet USCG approval for both commercial and recreational use
|
89.04 |
|
|
Foam Ring Buoy - 20" - Orange w/White Grab Line
Inspected, tested and approved in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape.
Minimum Buoyancy 16.5lbs
SOLAS - "Saving of Lives at Sea"
SOLAS approved ring suitable for quick release from the bridge.
SOLAS approved
Coast Guard approved
|
70.62 |
|
|
Foam Ring Buoy - 24" - Orange w/White Grab Line
Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape.
Minimum Buoyancy 16.5lbs
SOLAS - "Saving of Lives at Sea"
SOLAS approved ring suitable for quick release from the bridge.
SOLAS approved
|
89.44 |
|
|
Foam Ring Buoy - 30" - Orange w/Grab Line
Inspected and tested in accordance with U.S. Coast Guard regulations. All rings contain unicellular polyurethane foam for buoyancy. Floating polypropylene grab lines contain UV stabilizers to ensure sunlight resistance. PE and vinyl skin version feature molded-in becket design, vinyl coated foam versions use sewn-in beckets to secure grab line. choose between energy absorbent vinyl skin, vinyl coated foam, or rough, hard shell polyethylene skin. SOLAS approved models equipped with reflective tape.
Minimum Buoyancy 16.5lbs
SOLAS - "Saving of Lives at Sea"
SOLAS approved ring suitable for quick release from the bridge.
SOLAS approved
|
89.04 |
|
|
BoatGuard® Mooring Whip - 14'
For boats up to 10,000lbs
Taylor Made Products now provides a more economical way to protect your boat in higher wake areas. Designed with the same tough standards as our fixed base and our premium Mooring whips, these new Whips provide the "Safety Zone" between dock and boat for many types of docking applications. Unlike the competition, Taylor uses a large diameter solid Fiberglass pole that withstand rugged environments and provide that Spring Action to keep your boat safely away from the dock. CAD designed Whip Base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.
Note: When determining whip model weight is more important than length. Some docking conditions may be too rugged for this product.
|
626.86 |
|
|
BoatGuard® Mooring Whip - 12'
For boats up to 5,000lbs
Taylor Made Products now provides a more economical way to protect your boat in higher wake areas. Designed with the same tough standards as our fixed base and our premium Mooring whips, these new Whips provide the "Safety Zone" between dock and boat for many types of docking applications. Unlike the competition, Taylor uses a large diameter solid Fiberglass pole that withstand rugged environments and provide that Spring Action to keep your boat safely away from the dock. CAD designed Whip Base is injection molded from high impact reinforced plastic for incredible strength and durability. Sold as pairs and include all lines and hardware to complete the installation.
Note: When determining whip model weight is more important than length. Some docking conditions may be too rugged for this product.
|
542.34 |
|
|
Taylor Made Products
Taylor Made's industry-leading team of engineers are not only extraordinarily capable but bring with them decades of expert training and knowledge of marine manufacturing processes. Taylor Made sets the standard for design and excellence in boat fenders, covers and tops, dock products, furniture, windshields and a wide variety of other boating accessories. Taylor Made's mission is to simply build the highest quality marine products in the world. No compromises.
|
|