Dock Edge Flip-Up Cleat 8" White Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement. Product Specifications: Part No.: 2608W-F Description: Dock Cleat, Flip Up, 8", White, Almag 35 Weight: 1.5 lbs. Packaging Dimensions: 13 x 7 x 1 inches

Flip-Up Dock Cleat - 8" - Black Cast from solid marine grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.

Dock Edge Flip-Up Dock Cleat 8"Polished Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement. Product Specifications: Part No.: 2608P-F Description: Dock Cleat, Flip Up, 8", Aluminum, Polished Weight: 1.5 lbs. Packaging Dimensions: 13 x 7 x 1 inches

Dock Edge Flip-Up Dock Cleat 6" White Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement. Product Specifications: Part No.: 2606W-F Description: Dock Cleat, Flip Up, 6", White, Almag 35 Weight: 0.8 lbs. Packaging Dimensions: 7.5 x 7 x .75 inches

Dock Edge Flip-Up Dock Cleat 6" Polished Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement. Product Specifications: Part No.: 2606P-F Description: Dock Cleat, Flip Up, 6", Aluminum, Polished Weight: 0.8 lbs. Packaging Dimensions: 7.5 x 7 x .75 inches

Flip-Up Dock Cleat - 6" - Black Cast from solid marine grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.

Flip-Up Polyethylene Roto Molded 4-Step Dock Ladder - Grey Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicides. Rail Height: 20-1/2" above the dock Distance to first step: From dock surface, 11-3/4" & 10-1/2" between steps Steps: Are 4" deep and 14" wide Capacity: 500 lb (227 kg)

Dock Builders Cleat - Angled Aluminum Rail Cleat - 8" Features: Designed for aluminum framed docks Fits most OEM dock builder style docks with an aluminum extrusion Slides easily into place Angle allows for stronger hold

Stand-Off Flip-Up Polyethylene Roto Molded 4-Step Dock Ladder - Grey Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. The Stand Off roto-molded ladder extends into the water at a 60 degree angle to make getting out of the water easier. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicides. Rail Height: 20-1/2" above the dock Distance to first step: From dock surface, 12-1/2" & 10-1/2" between steps Steps: Are 6-1/2" deep and 14" wide Capacity: 500lb (227 kg)

Dock Bumper Corner Dock Guard - Black The black roto-molded bumper is fabricated from soft vinyl with UV inhibitors and Fungicides and has angled ends to deflect Craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.

Dock Bumper Straight Dock Guard - 18" - Black Fabricated from soft vinyl with UV Inhibitors and Fungicides, with angled ends to deflect craft and molded-in ribs for additional strength. The contours protect above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.

Dock Bumper Straight Dockguard - 18" - White Fabricated from soft vinyl with UV Inhibitors and Fungicides, with angled ends to deflect craft and molded-in ribs for additional strength. The contours protect above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.

Small Alloy Cam Cleat - Red, Black Base Features:  Hot-forged and hard anodized cams for maximum wear and corrosion resistance  Low effort line entry and exit due to unique teeth, line entry geometry and smooth finish  Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads  Superior resistance to sand and salt  Multi-coil spring generates near constant torque Easy entry/release and secure cleating of even the smallest diameter lines  Suitable for addition to swivel cleat bases for control lines and sheets  Small cleat has aluminium cams and a composite base for maximum durability and light weight  Medium cleat has an aluminium base and cams for maximum rigidity Engineered for Performance Intensive development efforts have produced this high performance range of cam cleats that provides unbeatable holding power while allowing easy cleating and releasing of control lines and sheets. Alloy Cleats™ Aluminium cam models built for ultimate durability where high wear and high loads are encountered. Cams are hot-forged and hard anodized for maximum strength and corrosion resistance. Ronstan Alloy Cleat™ models are available in sizes small and medium. The medium cleat is built on an aluminium base for maximum rigidity whilst the small cleat has a composite base for an optimum blend of lightness and durability. Slotted Bearings Self lubricating, self-cleaning slotted bearings provide lower frictional resistance, quicker response times and superior resistance to sand and salt than ball bearings which can deform under load. Multi-Coil Spring The multi-coil spring recessed in the upper part of the cam generates near constant torque. This consistency ensures secure cleating of even the smallest lines with minimal abrasion or rope wear. Unique Teeth and Entry Profiles Low effort line entry and exit due to unique teeth and entry geometry. Advanced Composite Base Small cleat has a base produced from long fiber reinforced polymer to save weight while providing essential stiffness. Customization A comprehensive range of specialist cleat accessories allow customization of the cleat set-up to optimize performance by controlling inward lead, outward lead, cleating and uncleating angle and height. Total Control Swivel cleat bases further enhance the function of cleats providing articulation, and with some models setting of cleating angle and direction (up or down cleating) to allow control of lines and sheets from various positions on the boat. Materials: Hard anodized aluminium cams Built on hard anodized aluminium base Specifications: Rope: 3/32 - 5/16 in. Height: 3/4 in. Width: 1 in. Length: 1-7/8 in. Fastener: 5/32 in. Fastener Hole Centers: 1-1/16 in. M.W.L : 165 lbs. B.L : 330 lbs Weight: 0.9 oz.

Raptor Bundle Pair - 8' Black Shallow Water Anchors with Active Anchoring & Footswitch Included Bundle Includes: (2) Minn Kota Raptor 8' Shallow Water Anchor with Active Anchoring - Black (1) Minn Kota Raptor Wireless Footswitch – Bluetooth Minn Kota Raptor 8' Shallow Water Anchor with Active Anchoring - Black Raptor keeps working to hold you more reliably than any other anchor, especially in rough conditions. It knows where you’re anchoring, what’s happening to your boat, and what to do next. It reads the bottom, senses the anchoring force, and reacts automatically to keep you locked down until you’re ready to change spots. Legendary Minn Kota's durability and innovative anchoring technology make Raptor the only hydraulic anchor that can call itself relentless.  Features: Active Anchoring: This revolutionary anchoring technology continuously monitors the anchoring force and adjusts to keep you pinned to the bottom Auto Bottom Mode: On Active Anchoring-enabled models, this anchoring mode automatically senses bottom composition and hardness to deliver the right amount of anchoring force every time Durable Design: A wider profile, heavy-duty reinforced pivot points, and extruded aluminum design will keep Raptor on the water in the harshest conditions Retraction Force: We designed Raptor with increased retraction force to ensure spike removal in all bottom types Multiple Control Options: Control Raptor from anywhere on the boat using your choice of options: wireless remote, foot switch, i-Pilot or i-Pilot Link remote, mobile app, or right from the Humminbird fish finder User-Selectable Anchoring Modes: Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), Standard (normal anchoring), and Auto-Bottom Mode on Active Anchoring equipped models, which automatically deliver the ideal anchoring force by sensing bottom hardness Indestructible Anchoring Spike: A strong and flexible composite anchor spike backed by a lifetime guarantee Auto Up/Down: Automatically deploy or retract your Raptor with the push of a button; no need to hold the button down Saltwater-Tough Engineering: Keeps Raptor safe from the corrosive effects of saltwater Other Features: Wireless remote 15' hydraulic hoses Specifications: Product Weight: 41 lb. Anchoring Depth: 8 ft. Product Dimensions: 12 in x 4.75 in x 58 in Operation: Hydraulic Deployment: Four-Bar Articulating Arm Minn Kota Raptor Wireless Footswitch – Bluetooth Raptor wireless foot switch allows for hands-free control of your Raptor. Control one or two Raptors independently or simultaneously. The foot switch is waterproof, includes LED indicator lights, and has an easy-access battery compartment. Features: Enable or disable active Anchoring Anchor mode selection of Auto-Bottom, Standard, Rough Water, or Soft Bottom Change deployment and retraction speed Selection and control of single or dual Raptors LED display of anchor mode for single or dual Raptors Modular deck mount for easy removal and storage Automatic up/down Waterproof and floats Battery included

C-Cleat Cam Cleat - Small - Black w/Black Base 2-8mm(3/32" - 5/16") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring