|
Flip-Up Dock Cleat - 6" - Black
Cast from solid marine grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.
|
21.36 |
|
|
Dock Edge Flip-Up Cleat 8" White
Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.
Product Specifications:
Part No.: 2608W-F
Description: Dock Cleat, Flip Up, 8", White, Almag 35
Weight: 1.5 lbs.
Packaging Dimensions: 13 x 7 x 1 inches
|
35.24 |
|
|
Dock Edge Flip-Up Dock Cleat 6" White
Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.
Product Specifications:
Part No.: 2606W-F
Description: Dock Cleat, Flip Up, 6", White, Almag 35
Weight: 0.8 lbs.
Packaging Dimensions: 7.5 x 7 x .75 inches
|
21.36 |
|
|
Dock Edge Flip-Up Dock Cleat 6" Polished
Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.
Product Specifications:
Part No.: 2606P-F
Description: Dock Cleat, Flip Up, 6", Aluminum, Polished
Weight: 0.8 lbs.
Packaging Dimensions: 7.5 x 7 x .75 inches
|
21.36 |
|
|
Dock Edge Flip-Up Dock Cleat 8"Polished
Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.
Product Specifications:
Part No.: 2608P-F
Description: Dock Cleat, Flip Up, 8", Aluminum, Polished
Weight: 1.5 lbs.
Packaging Dimensions: 13 x 7 x 1 inches
|
35.24 |
|
|
Flip-Up Dock Cleat - 8" - Black
Cast from solid marine grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional, they are available in 3 sizes to suit any requirement.
|
35.24 |
|
|
Flip-Up Polyethylene Roto Molded 4-Step Dock Ladder - Grey
Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicides.
Rail Height: 20-1/2" above the dock
Distance to first step: From dock surface, 11-3/4" & 10-1/2" between steps
Steps: Are 4" deep and 14" wide
Capacity: 500 lb (227 kg)
|
239.60 |
|
|
8' x 5' Inflatable Dock
The 8x5 dock is constructed to comfortably fit up to 6 people with minimal tossing, turning, or tipping and is the optimal size as a maintenance platform.
The inflatable dock was invented with one goal in mind: to create a floating “home base” on the water. Throw on some lounge chairs and a cooler, and you’ve created your own floating island to kick back with friends and family. Designed with premium-grade PVC & our state-of-the-art drop stitch technology, our inflatable docks feel rigid when inflated, and are incredibly light & compact when folded up.
The concept is quite simple – they’re really just floating rectangles. But when you take a closer look, they become so much more – hang out on it, work off it, launch off it. The possibilities truly are limitless.
Drop-stitch core - Drop-Stitch is constructed of thousands of polyester threads that connect the top and bottom pieces of PVC together. This technology allows for high-pressure inflation, creating a flat & rigid surface, with a solid feel.
PVC Exterior Layer - The top layer of the inflatable dock is constructed with 1000 Denier, 3 Ply, PVC material. This premium-grade material is extremely durable, UV & Puncture Resistant, and tough enough to withstand harsh marine environments.
Fabric-reinforced PVC rail - The inflatable dock’s exterior rails are double-reinforced to ensure seam durability and toughness. Its extra-reinforced exterior layer is designed to absorb impact from hard objects, so you can confidently tie up against other boats and docks.
Features:
Ties up to anything, anywhere
Accommodates chairs, coolers, and more
Doubles as a portable water sports launch pad
Modular design for easy connection
Equipped with high-pressure Halkey Roberts (HR) valve
Additional 40 square feet of floating real estate
Pet-friendly PVC material
Equipped with (6) D-Rings to attach necessary tools
Double-layered PVC rail eliminates the risk of hull damage when tying to your boat or dock
Allows access to hard-to-reach spots you couldn't before
Technical Specifications:
Folded size - 24" x 16" x 7"
Inflated size - 8' (L) x 5' (W) x 6" (H)
Recommended pressure - 10 PSI
Weight - 26 lbs
In the Box:
Floating dock
Pump
Carry bag
Repair kit
|
341.99 |
|
|
Stand-Off Flip-Up Polyethylene Roto Molded 4-Step Dock Ladder - Grey
Tough and durable, this roto-molded ladder swings up and out of the way, locking in place when not in use. The Stand Off roto-molded ladder extends into the water at a 60 degree angle to make getting out of the water easier. Will not corrode with exposure and will not fade or crack. Molded-in U.V. inhibitors and fungicides.
Rail Height: 20-1/2" above the dock
Distance to first step: From dock surface, 12-1/2" & 10-1/2" between steps
Steps: Are 6-1/2" deep and 14" wide
Capacity: 500lb (227 kg)
|
261.54 |
|
|
Dock Bumper Corner Dock Guard - Black
The black roto-molded bumper is fabricated from soft vinyl with UV inhibitors and Fungicides and has angled ends to deflect Craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.
|
18.38 |
|
|
Dock Bumper Straight Dockguard - 18" - White
Fabricated from soft vinyl with UV Inhibitors and Fungicides, with angled ends to deflect craft and molded-in ribs for additional strength. The contours protect above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.
|
17.09 |
|
|
Dock Bumper Straight Dock Guard - 18" - Black
Fabricated from soft vinyl with UV Inhibitors and Fungicides, with angled ends to deflect craft and molded-in ribs for additional strength. The contours protect above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.
|
17.09 |
|
|
Small Alloy Cam Cleat - Red, Black Base
Features:
Hot-forged and hard anodized cams for maximum wear and corrosion resistance
Low effort line entry and exit due to unique teeth, line entry geometry and smooth finish
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Superior resistance to sand and salt
Multi-coil spring generates near constant torque Easy entry/release and secure cleating of even the smallest diameter lines
Suitable for addition to swivel cleat bases for control lines and sheets
Small cleat has aluminium cams and a composite base for maximum durability and light weight
Medium cleat has an aluminium base and cams for maximum rigidity
Engineered for Performance
Intensive development efforts have produced this high performance range of cam cleats that provides unbeatable holding power while allowing easy cleating and releasing of control lines and sheets.
Alloy Cleats™
Aluminium cam models built for ultimate durability where high wear and high loads are encountered. Cams are hot-forged and hard anodized for maximum strength and corrosion resistance. Ronstan Alloy Cleat™ models are available in sizes small and medium. The medium cleat is built on an aluminium base for maximum rigidity whilst the small cleat has a composite base for an optimum blend of lightness and durability.
Slotted Bearings
Self lubricating, self-cleaning slotted bearings provide lower frictional resistance, quicker response times and superior resistance to sand and salt than ball bearings which can deform under load.
Multi-Coil Spring
The multi-coil spring recessed in the upper part of the cam generates near constant torque. This consistency ensures secure cleating of even the smallest lines with minimal abrasion or rope wear.
Unique Teeth and Entry Profiles
Low effort line entry and exit due to unique teeth and entry geometry.
Advanced Composite Base
Small cleat has a base produced from long fiber reinforced polymer to save weight while providing essential stiffness.
Customization
A comprehensive range of specialist cleat accessories allow customization of the cleat set-up to optimize performance by controlling inward lead, outward lead, cleating and uncleating angle and height.
Total Control
Swivel cleat bases further enhance the function of cleats providing articulation, and with some models setting of cleating angle and direction (up or down cleating) to allow control of lines and sheets from various positions on the boat.
Materials:
Hard anodized aluminium cams
Built on hard anodized aluminium base
Specifications:
Rope: 3/32 - 5/16 in.
Height: 3/4 in.
Width: 1 in.
Length: 1-7/8 in.
Fastener: 5/32 in.
Fastener Hole Centers: 1-1/16 in.
M.W.L : 165 lbs.
B.L : 330 lbs
Weight: 0.9 oz.
|
21.17 |
|
|
C-Cleat Cam Cleat - Small - Black w/Black Base
2-8mm(3/32" - 5/16") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
20.64 |
|
|
C-Cleat Cam Cleat - Medium - Black w/Black Base
3-12mm(1/8" - 1/2") Rope Diameter
Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive.
Features:
Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance
Cam profile and multi-coil spring minimise line entry and release effort
Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion
Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads
Applications:
Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating
Materials:
Carbon fiber composite cams
Long strand glass fiber reinforced polymer base
PTFE impregnated Acetal slotted bearing
Stainless steel multi-coil spring
|
22.25 |
|