|
Fender 'TOON Accessory Kit
Dock Edge's Fender 'TOON Accessory Kit
|
11.94 |
|
|
Pontoon Mirror/Bracket Kit w/VR-100 Pro & PCX-200 (Silver)
The Pontoon Mirror System includes a bracket and mirror. It is a mirror system designed specifically for the pontoon pilot. The convex mirror provides a wide viewing angle and the precision-machined bracket provides a rigid lock for superior stability in rough waters.
The VR-100 PRO mirror is a Black 6″ x 14″ HD Prescription-Grade Mirror.
The PCX-200 bracket is made from 6061-T6 aerospace aluminum. The clamp-on design provides a solid foundation secured to the pontoon rail with a 3M ultra-high bond, pressure-sensitive adhesive, and stainless steel set screws. No drilling is required.
In the Box:
VR-100 PRO (Black)
PCX-200 Mirror Bracket (Silver)
Set Screws x 2
Ultra-High Bond, Pressure-Sensitive Adhesive
Easy-to-Follow Installation Instructions with Mounting Template
*Does not include cover
*Sold as an Individual
|
298.04 |
|
|
Pontoon Mirror/Bracket Kit w/VR-100 Pro & PCX-200 (Titanium Grey)
The Pontoon Mirror System includes a bracket and mirror. It is a mirror system designed specifically for the pontoon pilot. The convex mirror provides a wide viewing angle and the precision-machined bracket provides a rigid lock for superior stability in rough waters.
The VR-100 PRO mirror is a Black 6″ x 14″ HD Prescription-Grade Mirror.
The PCX-200 bracket is made from 6061-T6 aerospace aluminum. The clamp-on design provides a solid foundation secured to the pontoon rail with a 3M ultra-high bond, pressure-sensitive adhesive, and stainless steel set screws. No drilling is required.
In the Box:
VR-100 PRO (Black)
PCX-200 Mirror Bracket (Titanium Grey)
Set Screws x 2
Ultra-High Bond, Pressure-Sensitive Adhesive
Easy-to-Follow Installation Instructions with Mounting Template
*Does not include cover
*Sold as an Individual
|
298.04 |
|
|
Pontoon Fender Lock
Taco Marine introduces the latest in a line of accessories intended for easy docking along with safety and convenience. Make your docking experience as effortless as possible. Quickly set your fender lines at the desired length off the side of your pontoon boat. The line remains at optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your pontoon boat is protected with the fenders in their ideal position.
Features:
Stainless Steel Type 316
Designed for pontoon boats
1” diameter button
Fits 1" - 1-1/4” square tube
Nylon ring washer to separate dissimilar metals
Mounting application fastens from the bottom of the square tube
|
87.00 |
|
|
Mooring Fender Lock Kit - Stainless Steel Pair
Stainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal.
Features:
Accepts up to 1/2-inch diameter fender line
Stainless steel construction and includes mounting hardware
Includes two flush-mount stainless steel mounting plates and two stainless steel keys
Quickly and easily install or move fenders when mooring
Dimensions:
Width: (inch) 2"
Height: (inch) 1"
*Line sold separately
|
7.60 |
|
|
9" Diameter Fender Holder Kit - 2 Pack
Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel. The modular design and hardware attachments allow for a wide array of options for boat fender storage.
Features:
Versatile system for easy installation
Durable construction for years of service
Flexible modular design - add on or reconfigure at anytime
Available as individual pieces or as a kit for a two or three holder assembly
One of the most popular fender holders on the market
The two holder kits include two TFR fender baskets (of selected size), three TFR 402 rails mounts (for 7/8 - 1 in. rails) and a pair of TFR 403 Parallel Connectors
Specifications:
Size: (inch) 9"
Fits the following Polyform fenders: F-2, F-3, G-5, HTM-2, NF-5
*Note: Fenders sold separately
|
219.19 |
|
|
Dock Bumper Straight Dockguard - 18" - White
Fabricated from soft vinyl with UV Inhibitors and Fungicides, with angled ends to deflect craft and molded-in ribs for additional strength. The contours protect above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.
|
17.09 |
|
|
True Fit 2 Fender Holder Kit - 12" Diameter
Polyform True Fit Boat Fender Holders provide a convenient storage location for boat fenders. Made from durable materials, these fender holders are built to last many years and provide a professional look for any vessel. The modular design and hardware attachments allow for a wide array of options for boat fender storage.
The modular system fits rails from 7/8" to 1" at any height or angle. Because of its modular design, you can add on additional fender holders as your needs change.
Compatible With:
F-5 Fenders, G-6 Fenders, NF-5 and HTM-3 Fenders
Features:
A versatile system for easy installation
Durable construction for years of service
Flexible modular design - add on or reconfigure at anytime
Technical Specifications:
Made from 304 Stainless Steel wire
Dimension (individual Fender Holder) Inside Diameter - 12"
Dimension (individual Fender Holder) Length - 25"
Weight (kit) - 3.7 lbs
In the Box:
Two (2) TFR-280 Holders
Three (3) TFR-402 Swivel connectors (7/8" - 1" Rail)
Two (2) TFR-403 Parallel connectors
*Sold as a Kit
|
241.76 |
|
|
Quick Release Fender Lock Kit
Enhance dockside safety and convenience with the Quick Release Fender Lock, which ensures secure, quickly stored fender lines that are set and maintained at your preferred length. This complete kit includes the locking Pull Pin and the Receiver. The Receiver features a spring-loaded hole cover that provides a finished look when the Pull Pin is not inserted and protects the interior of the receiver from the elements. The locking Pull Pin features a 1" diameter push button and a 7/8" diameter hole to accommodate a large line. When you're ready to set your fenders, simply insert the locking Pull Pin into Receiver.
Features:
Manufactured from stainless steel Type-316L
Designed for fiberglass
The overall height above the deck is 1-11/16"
Features a 1" diameter button
Nylon ring washer to separate dissimilar metals
The mounting application fastens from the bottom of the Receiver
3-year limited warranty
|
113.82 |
|
|
Dock Bumper Corner Dock Guard - Black
The black roto-molded bumper is fabricated from soft vinyl with UV inhibitors and Fungicides and has angled ends to deflect Craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.
|
18.38 |
|
|
Dock Bumper Straight Dock Guard - 18" - Black
Fabricated from soft vinyl with UV Inhibitors and Fungicides, with angled ends to deflect craft and molded-in ribs for additional strength. The contours protect above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.
|
17.09 |
|
|
Edge Mount Trim Tab Kit w/LED Indicator Switch Kit
Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.
Suggested Boat Length:16'-25'
L" x W": 9" x 12"
Hinge Height: 2"
Minimum Transom Height: 13.5"
Kit Contents
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads & Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner's / installation manual
All necessary stainless steel mounting hardware
Specifications:
Blades: 12 Gauge Stainless Steel
Finish:Smooth
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
LED Indicator Switch Kit
With Built-In Retractor & Self-Check Features For Single Actuator Systems / 12 & 24-Volt
Lenco Waterproof Trim Tab Tactile Switch Kits complete your trim tab system with totally waterproof, maintenance-free, and easy-to-install tactile switches.
The Lenco indicator switch is the most advanced trim tab switch available. The switch itself is completely waterproof, and has an over-molded connector to eliminate water intrusion. L.E.D. indicator lights let you know exactly where your trim tabs are at all times. A backlit keypad automatically illuminates graphics for night viewing. A photo eye reads ambient light and adjusts the indicator intensity for optimum viewing in all lighting conditions.
The standard tactile switch is built to all the same exacting standards as the indicator switches.
Kit Contents
Self-contained sealed Key Pad
Control box
36" Power Pigtail.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
967.84 |
|
|
12" x 9" Electro-Polished Edge Mount Trim Tab Kit
12 Volt
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Electro-Polished blades are constructed of 12-gauge 304 stainless steel with 1" turned up edges and an 85x inside taper and 1/8" diameter stainless steel hinge pin. The actuators mount at the trailing edge of the blades, requiring 1/2" less transom height than the standard mount tabs.
Kits include:
(2) 12-gauge stainless steel Electro-Polished blades
(2) 15054-001 actuator with 6' leads and Deutsch connectors
(2) 30133-103 20' actuator extension wiring harnesses
(2) 15085-001 upper mounting brackets with gland seal
(2) 50014-001 lower mounting brackets
Lenco owner's/installation manual
Stainless steel mounting hardware
Specifications:
Boat Length:14' - 18'
L" x W":12" x 9"
Hinge Height:2"
Minimun Transom Height:11"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
658.37 |
|
|
12" x 12" Electro-Polished Edge Mount Trim Tab Kit
12 Volt
Fast response electric actuators for precise control. Fully submersible. All Plug & Play Deutsch connections. Electro-Polished blades are constructed of 12-gauge 304 stainless steel with 1" turned up edges and an 85x inside taper and 1/8" diameter stainless steel hinge pin. The actuators mount at the trailing edge of the blades, requiring 1/2" less transom height than the standard mount tabs.
Kits include:
(2) 12-gauge stainless steel Electro-Polished blades
(2) 15054-001 actuator with 6' leads and Deutsch connectors
(2) 30133-103 20' actuator extension wiring harnesses
(2) 15085-001 upper mounting brackets with gland seal
(2) 50014-001 lower mounting brackets
Lenco owner's/installation manual
Stainless steel mounting hardware
Specifications:
Boat Length:17' - 30'
L" x W":12" x 12"
Hinge Height:2"
Minimun Transom Height:11"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
706.08 |
|
|
9" x 12" Edge Mount Trim Tab Kit without Switch Kit -12V
Lenco Electric Edge Mount Trim Tab Kits make your boat ride smoother, dryer, faster and with increased safety whether on a small skiff or a large yacht. The Lenco ball screw design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. Lenco fast response electric actuators are fully submersible with all plug & play waterproof Deutsch connections. Edge Mount actuators mount at the trailing edge of the plane, requiring 4" (10.16 cm) less transom height than Lenco standard mount trim tabs.
Kit Contents:
2 each of 12-gauge stainless steel trim tab blades
2 each of #15054-001 actuator with 6' leads & Deutsch plugs
2 each of #30133-103 20' actuator extension wiring harnesses
2 each of #15085-001 (116) upper mounting brackets with gland seal
2 each of #50014-001 (119) lower mounting brackets
1 each of the Lenco owner’s / installation manual
All necessary stainless steel mounting hardware
Specifications:
Suggested Boat Length: 16' to 25'
Length of Tab: 9"
Width of Tab: 12"
Hinge Height: 2"
Minimum Transom Height: 13.5"
Blades: 12 Gauge Stainless Steel
Finish: Smooth
Switch Kit: Sold Separately
Class: Fuel Efficient
Compliance: CE Certified
Compatibility: Any Boat
Actuators: 12-volt
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
621.73 |
|