|
3 Piece Dock Bumper Kit - 1 Corner Piece, 2 18" Straight Pieces
This roto-molded bumper kit is fabricated from soft vinyl with UV Inhibitors and Fungicides. Each piece has angled ends to deflect craft and molded-in ribs for additional strength. The contours of each piece protects above as well as the dock face, providing excellent gunnel protection for bass and ski boats. Mounts easily in minutes and is suitable for all applications.
|
47.03 |
|
|
Ampco C216-Kit1-Buna, Kit #1
|
76.05 |
|
|
Ampco Pumps C114-KIT1-BUNA Seal Kit #1 Buna - 114
|
78.39 |
|
|
Ampco Pumps C218/328-KIT1-BUNA Seal Kit #1 Buna - 218/328
|
98.28 |
|
|
Ampco Pumps C218/328-KIT1-VITON Seal Kit #1 Viton - 218/328
|
149.76 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1" SHAFT 2" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
83.26 |
|
|
PSS Shaft Seal Maintenance & Parts Replacement Kit
FOR 1" SHAFT 2 1/4" TUBE
As with any rubber hose below waterline, the PSS bellows must be inspected
on a regular basis for any sign of wear, aging or chemical deterioration.
The PSS bellow should be replaced in six year intervals. During bellows
replacement it is recommended the o-rings & set screws in the stainless
steel rotor also be replaced.
Bellows may need to be more frequently inspected in an environment where
non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate
rubber deterioration, as will an ozonater.
The Maintenance Kit includes the items you need to properly maintain your
PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings,
five (5) set screws, four (4) new hose clamps and an allen key.
|
83.26 |
|
|
Gianneschi SUPER LARIO 3 Bronze Hand Pump 1 1/4"
Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 13.2 GPM at 95 feet head (40 PSI), Bronze construction, Bronze impeller. Inlet Port is 1-1/4 Inch, Discharge Port is 1-1/4 Inch.
Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.
|
3446.19 |
|
|
WakeSurf Edge Pro II Mega Wake Shaper - 14" x 18"
FATSAC's huge water displacement wing for maximum wave height!
Recommended boat 21’ or longer, have a 325hp engine or greater, use with FATSAC water ballast systems. Level load your boat to keep the nose down for the captain’s visibility and a long wake.
Features:
Patented Concave Water Channeling Wing - Our concave channeling wing surface pushes more water to increase the length of the wave while keeping the face super clean!
Super Strong Suction Cup Attachment - Our 4.5-inch rubber suction cups won’t damage the gel coat or leave black markings on your boat. Easy to adjust on the fly, No ugly Velcro or safety tethers are required.
Durable Rust-Free Materials - We Build the WakeSurf Edge with impact-resistant, lite weight glass-filled nylon 6.6. and rust-free stainless steel hardware. Our shaper is long-lasting; won’t rust or stain your boat.
Built-In Flotation - Don’t worry about your wake-shaping investment sinking to the bottom. The Wakesurf Edge wing is rotomolded and sealed airtight.
|
221.99 |
|
|
Embossed 4-Piece Step Kit - Snow Camo
Great for slippery trailer fenders, steps, and boat ladders SeaDek Step Kits are made from our .2" thick PE/EVA blended foam material.
Each kit comes with four (4) - 12.75" x 3.75" pieces of our soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry. Our step kits come with a 3M™ pressure sensitive adhesive to provide an easy peel-and-stick application.
Technical Specifications:
Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2"
Color - Snow Camo
Material - Closed PE/EVA cell foam
*Sold as an Individual
|
27.85 |
|
|
Embossed 4-Piece Step Kit - White
Great for slippery trailer fenders, steps, and boat ladders SeaDek Step Kits are made from our .2" thick PE/EVA blended foam material.
Each kit comes with four (4) - 12.75" x 3.75" pieces of our soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry. Our step kits come with a 3M™ pressure sensitive adhesive to provide an easy peel-and-stick application.
Technical Specifications:
Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2"
Color - White
Material - Closed PE/EVA cell foam
*Sold as an Individual
|
27.85 |
|
|
Embossed 4-Piece Step Kit - Cool Grey
Great for slippery trailer fenders, steps, and boat ladders SeaDek Step Kits are made from our .2" thick PE/EVA blended foam material.
Each kit comes with four (4) - 12.75" x 3.75" pieces of our soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry. Our step kits come with a 3M™ pressure sensitive adhesive to provide an easy peel-and-stick application.
Technical Specifications:
Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2"
Color - Cool Grey
Material - Closed PE/EVA cell foam
*Sold as an Individual
|
27.85 |
|
|
Embossed 4-Piece Step Kit - Aqua Camo
Great for slippery trailer fenders, steps, and boat ladders SeaDek Step Kits are made from our .2" thick PE/EVA blended foam material.
Each kit comes with four (4) - 12.75" x 3.75" pieces of our soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry. Our step kits come with a 3M™ pressure sensitive adhesive to provide an easy peel-and-stick application.
Technical Specifications:
Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2"
Color - Aqua Camo
Material - Closed PE/EVA cell foam
*Sold as an Individual
|
27.85 |
|
|
Embossed 4-Piece Step Kit - Desert Camo
Great for slippery trailer fenders, steps, and boat ladders SeaDek Step Kits are made from our .2" thick PE/EVA blended foam material.
Each kit comes with four (4) - 12.75" x 3.75" pieces of our soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry. Our step kits come with a 3M™ pressure sensitive adhesive to provide an easy peel-and-stick application.
Technical Specifications:
Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2"
Color - Desert Camo
Material - Closed PE/EVA cell foam
*Sold as an Individual
|
27.85 |
|
|
Embossed 4-Piece Step Kit - Army Camo
Great for slippery trailer fenders, steps, and boat ladders SeaDek Step Kits are made from our .2" thick PE/EVA blended foam material.
Each kit comes with four (4) - 12.75" x 3.75" pieces of our soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry. Our step kits come with a 3M™ pressure sensitive adhesive to provide an easy peel-and-stick application.
Technical Specifications:
Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2"
Color - Army Camo
Material - Closed PE/EVA cell foam
*Sold as an Individual
|
27.85 |
|