Fender Lock Chrome Plated Zinc Alloy The eye is to be permanently attached to the fender line

Flush Pull Chrome Plated Zinc Alloy Dimmensions: 3-11/16" x 1-11/16"

Locking Collar Pole Light Mounting Base (2 Pin) - Plug-In Type Base 5° Rake Construction Chrome Plated Zinc Alloy Black Plastic Waterproof snap-on cover Pigtail Leads Fits Figs. 1343, 1348, 1400, 1445, 1451, 1455, 1456, 1465 and 1470 Series All-Round Pole Lights

Mooring Fender Lock Kit - Stainless Steel Pair Stainless Steel Fender Lock Kit 11575-3 makes hanging or moving fenders quick and easy. The two-part kit is easy to install with stainless steel screws or bolts (not included). Tie fenders to the key part of the kit then twist into the deck plate to secure fenders to the gunwale. No need to untie and retie fenders when moving or docking; just twist the key for installation or removal. Features: Accepts up to 1/2-inch diameter fender line Stainless steel construction and includes mounting hardware Includes two flush-mount stainless steel mounting plates and two stainless steel keys Quickly and easily install or move fenders when mooring Dimensions: Width: (inch) 2" Height: (inch) 1" *Line sold separately

Surface Mount Drawer Pull - Chrome Plated Zinc Specs: Chrome Plated Zinc Alloy Overall Width: 3-7/16" Inside Width: 2-5/16" Screw Size: 6

Chrome Plated Zinc Cabin Door Hook - 2" Features: Chrome Plated Zinc Alloy

Bi-Color LED Horizontal Mount - Chrome Plated Zinc This Perko light is certified for use on power-driven vessels under 20 meters (65.6 feet) in both the USA and European markets. Features: Chrome-plated zinc alloy top with black polymer base High-tech, self-contained LED modules Same footprint as the 0627/0628 incandescent lights (wiring hole and mounting screw locations may vary) 2-mile (USCG 2nm) certified Specifications: Voltage: 12 Volt LED Wattage: 2.5 watts Amperage: 0.21 amps Dimensions (L x W x H): 3-3/8 in. x 2-1/2 in. x 1-1/2 in. Screw Size: #6 Finish: Chrome Meets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm NMMA Type Accepted Number: 2619657

Red/Green Horizontal Mount Side Lights - Pair - Chrome Plated Zinc This Perko light is certified for use on power-driven vessels under 20 meters (65.6 feet) in both the USA and European markets. Features: Chrome-plated zinc alloy top with black polymer base High-tech, self-contained LED modules Same footprint as the 0627/0628 incandescent lights (wiring hole and mounting screw locations may vary) 2-mile (USCG 2nm) certified Specifications: Voltage: 12 Volt LED Wattage: 2.5 watts Amperage: 0.21 amps Dimensions (L x W x H): 3-3/8 in. x 2-1/2 in. x 1-1/2 in. Screw Size: #6 Finish: Chrome Meets Global Specs for: ABYC C-5, NMMA Type Accepted, EN/ISO 19009:2015, ABYC A-16 (2016), 1972 COLREGS, RCD 2013/53/EU, USCG 33 CFR - 2nm NMMA Type Accepted Number: 2619658 *Sold as a pair

Perko Rectangular Plug-In Base f/Pole Cards - Chrome Plated Zinc/Black Features: Plain black cap, chrome plated zinc alloy Black polymer base Pigtail leads Fits 1343, 1348, 1400, 1451 and 1470 Series All-Round Pole Lights Specs: Number of Pins: 2 Base Dimensions: 3-3/4" x 1-5/8" Tube Angle: 16° Screw Size: 8

Pontoon Fender Lock Taco Marine introduces the latest in a line of accessories intended for easy docking along with safety and  convenience. Make your docking experience as effortless as possible. Quickly set your fender lines at the desired length off the side of your pontoon boat. The line remains at optimum length with the mounting pin attached. At the dock, you simply insert the pin into the fitting and your pontoon boat is protected with the fenders in their ideal position. Features: Stainless Steel Type 316 Designed for pontoon boats 1” diameter button Fits 1" - 1-1/4” square tube Nylon ring washer to separate dissimilar metals Mounting application fastens from the bottom of the square tube

Watertight Cable Outlet for 5/16" Cable Chrome Plated Brass The chrome plated brass watertight cable outlet is designed for use with a 5/16 in. OD cable. Equipped with rubber grommet for watertight passage of cable. Base diameter: 1-1/4 in. Built from quality materials for long-lasting durability. Features: Watertight cable outlet Chrome plated brass Diameter base: 1-1/4 in. Built with quality materials

Perko 5/8" Thru-Hull Connection f/ use with Hose Chrome Plated Bronze Flange is machined to fit and grooved to retain bedding compound neck is threaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inches Short Length- For thin hull sections up to 5/8 inches maximum Technical Information Regular Length - Chrome Plated Bronze: Hose Size Inches: 5/8 Mounting Hole Diameter Inches: 13/16 Maximum Hull Thickness Inches: 1-1/16 O.D. Flange Inches: 1-1/2 Model Number: 0350004DPC Ship Weight: 1.9/3.3 lbs. Made in the USA

Perko 3/4" Thru-Hull Connection f/ use with Hose Chrome Plated Bronze Flange is machined to fit and grooved to retain bedding compound neck is threaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inches Short Length- For thin hull sections up to 5/8 inches maximum Technical Information Regular Length - Chrome Plated Bronze: Hose Size Inches: 1/4" Mounting Hole Diameter Inches: 1" Maximum Hull Thickness Inches: 1-5/8" O.D. Flange Inches: 1-7/8" Model Number: 0350005DPC Ship Weight: 2.9/5.6 lbs. Made in the USA

Perko 1" Thru-Hull Connection f/ use with Hose Chrome Plated Bronze Flange is machined to fit and grooved to retain bedding compound neck is threaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inches Short Length- For thin hull sections up to 5/8 inches maximum Technical Information Regular Length - Chrome Plated Bronze: Hose Size Inches: 1 Mounting Hole Diameter Inches: 1-5/16" Maximum Hull Thickness Inches: 1-3/4" O.D. Flange Inches: 2-1/4" Model Number: 0350006DPC Ship Weight: 4.6/8.4 lbs. Made in the USA

Perko 1-1/2" Thru-Hull Connection f/ use with Hose Chrome Plated Bronze Flange is machined to fit and grooved to retain bedding compound neck is threaded to approximately 3/16 inch from flange. Cast bronze, plain or chromed brass Regular or short length versions Regular Length- Fits maximum hull thickness up to 2 inches Short Length- For thin hull sections up to 5/8 inches maximum Technical Information Regular Length - Chrome Plated Bronze: Hose Size Inches: 1-1/2 Mounting Hole Diameter Inches: 1-7/8 Maximum Hull Thickness Inches: 1-7/8 O.D. Flange Inches: 3-1/8 Model Number: 0350008DPC Ship Weight: 8.2/16.1 lbs. Made in the USA