|
17" CM Mooring Buoy with SS Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 17" x 22" (43.2 x 55.9cm)
Tube Diameter - .625" (1.6cm)
Circumference - 53.4" (138.7cm)
Volume - 11.8 gallons (44.7L)
*Sold as an Individual
|
292.12 |
|
|
17" CM Mooring Buoy w/Steel Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 17" x 22" (43.2 x 55.9cm)
Tube Diameter - .625" (1.6cm)
Circumference - 53.4" (138.7cm)
Volume - 11.8 gallons (44.7L)
*Sold as an Individual
|
224.05 |
|
|
13.5" CM Mooring Buoy w/SS Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
259.76 |
|
|
13.5" CM Mooring Buoy w/Steel Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
191.65 |
|
|
17" CM Mooring Buoy with SS Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 17" x 22" (43.2 x 55.9cm)
Tube Diameter - .625" (1.6cm)
Circumference - 53.4" (138.7cm)
Volume - 11.8 gallons (44.7L)
*Sold as an Individual
|
292.12 |
|
|
17" CM Mooring Buoy w/Steel Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 17" x 22" (43.2 x 55.9cm)
Tube Diameter - .625" (1.6cm)
Circumference - 53.4" (138.7cm)
Volume - 11.8 gallons (44.7L)
*Sold as an Individual
|
224.05 |
|
|
13.5" CM Mooring Buoy w/SS Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
259.76 |
|
|
13.5" CM Mooring Buoy w/Steel Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
191.65 |
|
|
Surface Strip Light w/Switch - Warm White/Blue LEDs - 12V
The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.
Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.
The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.
Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.
These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.
Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
|
69.88 |
|
|
T-Top Tube Light w/Aluminum Housing - White/Blue LED Lights
LED Lights - Hard Wired
High output, low glare
Vibration & shock-resistant LEDs
Less than 1/4 amp draw won't drain battery
Impact-resistant & water resistant ideal for marine & other outdoor uses
T-Top Light
108 LEDs provide high output, low glare light
Switch from white light to red light for chart-reading
Impact-resistant Polycarbonate lens
Polished anodized aluminum housing
Pre-drilled for easy mounting
14' wiring cable to accommodate most tops & bridges
|
158.02 |
|
|
S-1 Buoy 6" x 15" - Cobalt Blue
The adaptable S Series S-1 buoy is an excellent choice for multipurpose applications. Use as a fender or mooring buoy for small boats and jet skis. Its compact size is perfect when storage space is limited.
The S Series' elongated design allows it to sit higher in the water than an ordinary round buoy. Replace the "bleach bottle" when small pot and trap fishing with a durable, distinctly visible marker buoy. Water sport associations and competition enthusiasts combine the S-1 "boat guide" with the Polyform WS-1 Slalom Buoy as a complete course-marker package.
Features:
Even wall thickness for maximum strength and durability
Reinforced ropehold
Polyform's unique vinyl valve system
Technical Specifications:
Size (diameter x length) - 6" x 15" (15.2 x 38.1cm)
Eye Diameter - .5" (1.3cm)
Circumference - 18.9" (47.9cm)
Volume - 1.6 gallons (6.1L)
Boat Size - 15' - 20' (4.6 - 6.1M)
*Sold as an Individual
|
23.71 |
|
|
S-1 Buoy 6" x 15" - White
The adaptable S Series S-1 buoy is an excellent choice for multipurpose applications. Use as a fender or mooring buoy for small boats and jet skis. Its compact size is perfect when storage space is limited.
The S Series' elongated design allows it to sit higher in the water than an ordinary round buoy. Replace the "bleach bottle" when small pot and trap fishing with a durable, distinctly visible marker buoy. Water sport associations and competition enthusiasts combine the S-1 "boat guide" with the Polyform WS-1 Slalom Buoy as a complete course-marker package.
Features:
Even wall thickness for maximum strength and durability
Reinforced ropehold
Polyform's unique vinyl valve system
Technical Specifications:
Size (diameter x length) - 6" x 15" (15.2 x 38.1cm)
Eye Diameter - .5" (1.3cm)
Circumference - 18.9" (47.9cm)
Volume - 1.6 gallons (6.1L)
Boat Size - 15' - 20' (4.6 - 6.1M)
*Sold as an Individual
|
16.79 |
|
|
A-2 Buoy 14.5" Diameter - White
The A-Series is the product that launched the Polyform story. This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions.
Marking gear used in heavy seas is no easy task. That's why more fishermen use Polyform A-Series than all other buoys combined. You name it, ocean, sea, or river, and the A-Series has been there.
Put your trust in Polyform's most versatile and well-known product.
Features:
Even wall thickness for maximum thickness
Heavy duty reinforced ropeholds
Polyform's unique vinyl valve system
Dual valve inflation/deflation system
Excellent choice for a rafting fender
One (1) piece design
Technical Specifications:
Size - 14.5" x 19.5" (36.8 x 49.5cm)
Eye Diameter - 1.125" (2.9cm)
Circumference - 45.6" (115.8cm)
Volume - 8.2 gallons (31L)
Boat Size - 30 - 40 (9.1 - 12.2M)
*Sold as an Individual
|
63.68 |
|
|
A-4 Buoy 20.5" Diameter - White
The A-Series is the product that launched the Polyform story. This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions.
Marking gear used in heavy seas is no easy task. That's why more fishermen use Polyform A-Series than all other buoys combined. You name it, ocean, sea, or river, and the A-Series has been there.
Put your trust in Polyform's most versatile and well-known product.
Features:
Even wall thickness for maximum thickness
Heavy duty reinforced ropeholds
Polyform's unique vinyl valve system
Dual valve inflation/deflation system
Excellent choice for a rafting fender
One (1) piece design
Technical Specifications:
Size - 20.5" x 27" (52.1 x 68.6cm)
Eye Diameter - 1.125" (2.9cm)
Circumference - 64.4" (163.6cm)
Volume - 22.5 gallons (85.2L)
Boat Size - 50 - 60' (15.2 - 18.3M)
*Sold as an Individual
|
120.11 |
|
|
16 AWG Gauge Striped Marine Wire 500' Spool - Brown with Blue Stripe
Striped wire is great for situations where someone is dealing with a large number of wires. Using striped wire makes identification easier. This, in turn, can increase job efficiency. All of Pacer's 16 AWG striped marine wire is manufactured in Sarasota, FL, USA, from Type III Class K tinned copper. During the production process, the copper conductors are jacketed with PVC insulation. This jacket is designed to be durable and flexible. All of Pacer's primary striped wire meets the requirements and standards of UL, ABYC, and NMMA.
How many options of 16 AWG striped marine wire does Pacer offer? The most important thing when selecting the proper striped wire is choice. By offering an enormous section, users are guaranteed to find the perfect choice. Currently, there are over 100 possible combinations of 16 AWG striped marine wires. Have a question about striped marine wire? Contact a Pacer expert today. This particular brown marine wire has a blue stripe and comes in a 500 ft. spool.
Features:
Stranded, tinned copper conductors
Highly flexible color-coded insulation
Annealed Finely Stranded Tinned Copper ASTM b172 Class K
Resistant to: Acid, Alkali, Abrasion, Flame, Gasoline, Oil, Moisture
Specifications:
Spool Length: 500 ft.
Insulation: -20 degrees C to 105 degrees C Flexible, Color Coded PVC
Temperature Rating: 105 degrees C Dry, 75 degrees C Wet, 60 degrees C Oil
Voltage Rating: 600-V
Applications:
Point-to-point wiring
Internal wiring of panels and motors
Compliances:
UL Standard 1426 (BC-5W2)
AWM 1015/1230
AWM 1028/1231
MTW, CSA: TEW
ABYC: E-8.14, E-9.14, Coast Guard: 33 CFR part183
|
74.77 |
|