|
13.5" CM Mooring Buoy w/SS Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
259.76 |
|
|
13.5" CM Mooring Buoy w/Steel Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
191.65 |
|
|
13.5" CM Mooring Buoy w/SS Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
259.76 |
|
|
13.5" CM Mooring Buoy w/Steel Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 13.5" x 18" (34.3 x 45.7cm)
Tube Diameter - .625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 6.6 gallons (25L)
*Sold as an Individual
|
191.65 |
|
|
17" CM Mooring Buoy with SS Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 17" x 22" (43.2 x 55.9cm)
Tube Diameter - .625" (1.6cm)
Circumference - 53.4" (138.7cm)
Volume - 11.8 gallons (44.7L)
*Sold as an Individual
|
292.12 |
|
|
17" CM Mooring Buoy w/Steel Iron - Red
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 17" x 22" (43.2 x 55.9cm)
Tube Diameter - .625" (1.6cm)
Circumference - 53.4" (138.7cm)
Volume - 11.8 gallons (44.7L)
*Sold as an Individual
|
224.05 |
|
|
17" CM Mooring Buoy with SS Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Stainless Steel
Size - 17" x 22" (43.2 x 55.9cm)
Tube Diameter - .625" (1.6cm)
Circumference - 53.4" (138.7cm)
Volume - 11.8 gallons (44.7L)
*Sold as an Individual
|
292.12 |
|
|
17" CM Mooring Buoy w/Steel Iron - White Blue Stripe
The CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring.
With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS). To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide).
The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide.
Features:
Large eye (4-3/8") and swivel (1-1/2") provide maximum strength
Soft vinyl surface won't harm boat finishes
Polyform's unique vinyl valve seals securely
Even wall thickness for strength and durability
One (1) piece design
Technical Specifications:
Mooring Iron - Galvanized Steel with protective vinyl-coated eye
Size - 17" x 22" (43.2 x 55.9cm)
Tube Diameter - .625" (1.6cm)
Circumference - 53.4" (138.7cm)
Volume - 11.8 gallons (44.7L)
*Sold as an Individual
|
224.05 |
|
|
Polyform HTM-4 Fender 13.5" x 34.8" - White with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
162.11 |
|
|
G-3 Twin Eye Fender 5.5" x 19" - Black w/Air Adapter
Polyform's G-Series fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropehold area for long term durability. We also put a little fun into fenders by offering the G-Series in 14 colors. Now, all competitive products are judged by the standard we set.
Features:
Even wall thickness for maximum strength
Molded in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and permanent protected moorings
Offered in 14 colors to suit any vessel: Black, white, gray, classic red, burgundy, sand, forest green, teal, blue, cobalt, navy, purple, yellow and orange
Unique Polyform valve for years of service.
Size: 5.5" x 19"
Eye Diameter: 5/8 in
Circumference: 17.3 in
|
20.64 |
|
|
HTM-4 Fender 13.5" x 34.8" - Black w/Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
162.11 |
|
|
HTM-4 Fender 13.5" x 34.8" - Blue with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
162.11 |
|
|
HTM-4 Fender 13.5" x 34.8" - Black
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
*Sold as an Individual
|
161.56 |
|
|
HTM-4 Fender 13.5" x 34.8" - Blue
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
*Sold as an Individual
|
161.56 |
|
|
HTM-4 Fender 13.5" x 34.8" - White
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 13.5" x 34.8" (34.3 x 88.4cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 42.4" (107.8cm)
Volume - 15.6 gallons (59.1L)
Boat Size - 40' - 50' (12.2 - 15.2M)
Weight - 10.5lb
*Sold as an Individual
|
161.56 |
|