|
Jabsco offers 3 options of Oil Change Systems to help you get you ready for Winter.
The Porta-Quick Portable Oil Changer makes quick, clean and easy oil changes on-board any boat, because it uses the vessel's own power supply to operate the powerful oil reservoir mounted flexible impeller pump.
The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engine oil pan or transmission sump.
The Do-it-Yourself Oil Changer will extract up to 50 weight of oil at a temperature of 160°F (71°C) through the engine's dip stick tube, usually in less than 5 minutes.
The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing oil in Boats, RV's, and Lawn and Garden Equipment.
Specials Closeouts Remanufactured Rebates
|
|
|
17820 Oil Changer System
The Jabsco Oil Change System is designed to be installed in a vessel's engine room with its manifold and valves permanently plumbed to the vessel's engines' oil pans or transmissions' oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve. The system's cover provides an attractive appearance, fully shrouding the entire pump and manifold system. It also provides added protection against accidental draining of an engine's oil supply because the valve cover protects the factory supplied valves from being accidentally bumped open. Additionally, at the end of an oil change, the cover will not close unless the factory supplied valves are in the fully closed position.
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
605.62 |
|
|
Mate USA M164-924-15 12/24V OIL CHANGE SYSTEM
3 Valves compact oil change electronic system for fixed boat installations. Conceived for oil fill and drain operations for all on-board uses like generators, engines, transmissions and catwalks. The electronic control adjusts the speed of the pump according to oil viscosity/temperature and increases its speed during priming. Automatically shuts off in case of empty tank, short circuit and after 30 minutes of operation. Indicated for a perfect cleaning of all on-board areas while avoiding leaks and dispersions on the boat floor. Easy to operate and carry.
PART #: M164-924-15
VOLTS: 12/24
GPM: 2.6
AMPERE: 4A/2A
PORTS: 1/2" NPT
|
927.00 |
|
|
Oil Changer System
This kit is particularly suitable for oil changes or the removal/change of other viscous liquids like antifreeze in tight spaces.
Features:
The pump is self-priming and can run dry
Can be reversed
Kit Contains:
5-gallon bucket
12V gear pump with 6 ft. wires with fuse and battery clamps
Oil dip hose set with 6mm and 8 mm quick-connect hose connections
5/8 in. port connections
6 amp fuse for continuous duty
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
181.82 |
|
|
3 Port Oil Change System with Reversing Switch - 12V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
860.66 |
|
|
3 Port Oil Change System with Reversing Switch - 24V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
874.00 |
|
|
6 Port Oil Change System with Reversing Switch - 12V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
924.67 |
|
|
6 Port Oil Change System with Reversing Switch - 24V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
938.00 |
|
|
4 Port Oil Change System with Reversing Switch - 12V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
908.00 |
|
|
4 Port Oil Change System with Reversing Switch - 24V
Features:
Powerful Gear pump Delivers Nearly twice the Flow as Competitive Models
TouchPad Controlled
Bronze Manifold System
System Sizes from 3 Valves to 6 Valves
Resettable Overcurrent and Dry Run Protection
Cover Conceals Pump and Circuitry on G Series
Oil Pan Adaptors Available for all Common Marine engines
|
921.34 |
|
|
Flat Tank Oil Changer System
The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process, ideal for changing engine oil in Boats, RV's, Lawn and Garden Equipment.
There is no need to worry about open containers causing spills when changing engine oils with the 3-1/2 Gallon (13LTR) compact self-contained unit fitted with a self-priming diaphragm pump with an easy pour spout for emptying.
The Flat Tank design allows for easy storage in deck boxes, boat storage lockers, or RV storage compartments. Easy to use, clean and efficient dipstick suction tube, battery clamp wire leads, an on-off pump switch.
Features:
Stores easily
Compact robust tank design
Easy pour spout with screw on cap
Easy to carry handle
3-1/2 gallon (13ltr) sealed container
Self-priming, run dry pump
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
191.41 |
|
|
Oil Change Systems
Use our Shipping Cost and Time Estimator on the Shopping Cart page of CLR Marine. You will need to add the item to the cart to get an estimate. We ship Monday-Friday (excluding Holidays and some weather days) and almost always ship same day when your order is placed before 2:30 PM Eastern Time if in stock.
|
|
|
Oil Change Pump w/3.5 Gallon Bucket - 12 VDC, 1.5 GPM
Incorporating SHURFLO's advanced motor technology that includes thermal overload protection, general utility pumps are self-priming, easy to install and are extremely versatile-perfect for a variety of uses including winterizing, oil changing and liquid transfer. 1 Year Warranty.
Features:
12 VDC
8' [2.4 m] Cable w/ Battery Clips
CE
Hose kit
3.5 Gal [13L] Storage Container
Uses: Oil changing, winterizing and liquid transfer
|
220.88 |
|
|
Jabsco 17830-0012 12V Oil Pump
Pump Body: Bronze
Port Size: 3/8" NPT
Impeller: Nitrile
Shaft Seal: Buna Lip Type
Motor: Reversible Permanent Magnet DC with Integral Reversing Switch, CE and EMC Compliant. Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected).
APPLICATIONS
The Oil Change Pump is the same high quality pump used in the Jabsco multi-engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. The pump is designed to be installed near a vessel’s engine and permanently plumbed to the engine’s oil pan. The pump can be used to remove old oil from the engine, then with the integral reversing switch, the flow direction can be changed to pump a measured amount of new oil back into the engine. The connection to the engine should be controlled by the 3/8" ball valve (provided) to guard against accidental oil discharge.
|
389.66 |
|
|
Jabsco 17820-0024 Oil Change Sys 24V
FEATURES
Pump Body:
Bronze
Port Size:
Valves: 1/2" NPT Full Flow Ball Type
Impeller:
Nitrile
Shaft Seal:
Buna Lip Seal
Motor:
Reversible Permanent Magnet With Integral Reversing Switch; Complies with USCG 183.410 and ISO 8846 Marine. CE Rated.
APPLICATIONS / CHARACTERISTICS
The Jabsco Oil Change System is designed to be installed in a vessel’s engine room with its manifold and valves permanently plumbed to the vessel’s engines’ oil pans or transmissions’ oil sumps. The manifold is factory fitted with three ball valves to serve three different oil reservoirs and may be fitted with two additional ball valves to drain up to five oil reservoirs. The system can be used to remove old oil from an engine or transmission then reversed, with the integral reversing switch, to pump a measured amount of new oil back into the engine or transmission. Each connection to an engine is controlled by a dedicated full flow ball valve.
Jabsco Oil Changer System 24V 5 Ports
|
695.50 |
|