Flojet G57-5005A Pump Aod Santo w/o Ports Flojet Diaphragm Pump AOD Air Powered, no Snap-In Port Fittings, 7.0GPM Max with 3/4” Port Fittings, Polypropylene, Santoprene Check Valve Seat and Diaphragm, 1/4” Hose Barb Straight Brass Air Inlet   Model No.: G57 Series Capable of Air or CO2 drive pressures up to 100PSI (6.9bar) Highest flow rate for any air pump of comparable size Robust Design with durable integral mounting Patented Shuttle Valve, eliminates stalling Capable of passing solids up to 3.2mm diameter easily with large clog-free Check Valves Corrosion Resistant materials capable of handling a wide range of chemicals Sanitary design with insert molded diaphragm (Santroprene only) Leak Resistant radial seals, no critical o-ring seals Quiet Operation with large exhaust muffler Ease of Installation with all quick disconnect ports Stall-proof design with patented shuttle valve   Automotive Cleaning and Recycling; Chemical Transfer and dispensing; Bag-In-Box chemicalsParts Washers; Car Wash Systems   Innovative compact design features a patented shuttle valve that eliminates stalling and provides a long life. Features a chemically resistant polypropylene body with a choice of EP/PP blend, FKM or FFKM elastomers, as well as quick disconnect liquid and gas port fittings for easy installation.

Flojet 01740-003S Strainer 3/8" Barb X 3/8" Barb Flojet Strainer with 3/8” Hose Barb Inlet and 3/8” Hose Barb Outlet, In-Line Design, Fine 40 Mesh Stainless Steel Screen   Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water.   Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap.   Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.   Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)   Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)   The Strainers that are Equiped with a "Direct Plug-In Quad Port" will fit into the Snap-In Quad Ports on Flojet Diaphragm Pumps and Jabsco Diaphragm Pumps sized under 6 GPM.

Flojet 01740-010 Strainer 3/4 Barb X Quad 90D Flojet Strainer with Direct Plug-In Quad Port Outlet and 3/4” Hose Barb Inlet, 90 Degree Elbow Design, Fine 40 Mesh Stainless Steel Screen Strainers for In-Line Applications. FDA Approved for Potable / Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM) Maximum Water Temperature: 160F (70C) Maximum Pressure: 70 PSI (5 bar)

Flojet 01740-711A Strainer for Jabsco 52700 This fits Flojet and Jabsco 5700 Diaphragm pumps. Strainers for In-Line Applications. FDA Approved for Potable Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Flojet 01720-002S Strainer Inline 1/2Hb SS Strainers for In-Line Applications. FDA Approved for Potable Drinking Water.   Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap.   Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.   Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Flojet 01720-010S Strainer Inlet 3/4Hb X Q Strainers for In-Line Applications. FDA Approved for Potable Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Flojet 01720-023S Strainer Inlet 3/8Hb Strainers for In-Line Applications. FDA Approved for Potable Drinking Water.   Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings.   Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications.   Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Flojet 01720-375B Strainer 3/8 Brb 20 Mesh Strainers for In-Line Applications. FDA Approved for Potable Drinking Water. Strainer Body made of Polypropylene with Clear Polysulfane Cap and Buna-N FDA O-Rings. Suitable for Fresh or Salt Water use. Easily Cleaned with See Through Thread-On Cap. Course 20 Mesh Screens are typically used for Washdown, Bilge and Toilet Rinse Applications. Fine 40 Mesh Screens are typically used for Potable / Drinking Water Applications. Maximum Flow Rates: With 3/4" Hose Barb Fittings: 7.0 GPM (27 LPM) With 1/2" Hose Barb Fittings: 4.0 GPM (15 LPM) With 3/8" Hose Barb Fittings: 2.1 GPM (8 LPM)

Flojet 01740-950S Strainer 90' Quad X Quad This Flojet 01740-950S strainer keeps debris out of your pump. Its 40 mesh screen is typically used for potable / drinking water applications. The strainer body is made of polypropylene with a clear cap and Buna-N o-rings. It has a 90 degree elbow design.   The strainer has a direct plug-in quad port outlet and female quad port inlet. You can use any standard snap-in quad port fitting for the inlet side. It will fit into the snap-in quad ports on Flojet diaphragm pumps under 6 GPM.   Materials are FDA approved Easy-to-clean plastic bowl Fine 40 mesh stainless steel screen Ports: Quad Female to Quad Male Set at 90 degrees from inlet to outlet  

Flojet D3131V5011A Mpu 12V V/V 3C Sw60  Flojet- Diaphragm Pump Duplex II 12V, 3/8”FNPT Ports, 1.6GPM, 60psi Switch, Polypropylene, Viton Valves, Viton Diaphragm

Flojet D3631V5011A Mpu 115V Vit/Vit 2C Sw60  Flojet- Diaphragm Pump Duplex II 115V, 3/8”FNPT Ports, 1.6GPM, 60psi Switch, Polypropylene, Viton Valves, Viton Diaphragm

Flojet D3835B5011A Mpu 115V B/B 3C Sw60 6' Cor  Flojet- Diaphragm Pump Duplex II 115V, 3/8”FNPT Ports, 1.6GPM, 60psi Switch, Polypropylene, Buna Valves, Buna Diaphragm, 6' Power Cord

Flojet D3835H5011A Pump 115V E/S 3C Sw60  Flojet- Diaphragm Pump Duplex II 115V, 3/8”FNPT Ports, 1.6GPM, 60psi Switch, Polypropylene, EPDM Valves, Santoprene Diaphragm, 6' Power Cord

Flojet I102010211 Pump 115V 4.8/25 Psv N/Sw  Flojet- Diaphragm Pump Duplex II 115V, 3/8”FNPT Ports, 4.8GPM, Bypass 25psi, Polypropylene, Viton Valves, Santoprene Diaphragm, 6' Power Cord

Flojet I103050211 Pump 115V 4.8/25 Pse N/Sw  Flojet- Diaphragm Pump Duplex II 115V, 3/8”FNPT Ports, 4.8GPM, Bypass 25psi, Polypropylene, EPDM Valves, Santoprene Diaphragm, 6' Power Cord