Low-Profile Submersible Trailer Light Kit Low profile for trailers over 80 inches wide. Ideal replacement lights for most boat trailers. Conforms to applicable U.S. FMVSS and Canadian CMVSS safety standards.  Kit Includes: (2) multi-function lamps  Wiring harness  License plate bracket and mounting hardware

Submersible LED Low-Profile Trailer Light Kit Ideal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards. Kit Includes: Includes (2) multi-functional (stop/tail/turn) submersible low-profile LED trailer lights  License plate bracket  Wiring harness and installation hardware

Clamp-On Portable LED Light Kit - Marine Gray Features: Water-resistant bow and stern navigation lights Attwood's most durable, portable LED navigation light engines Sealed electronics, built to last in harsh conditions 150+ hour run-time on three AAA batteries (not included) Heavy-duty c-clamp WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Clamp-On Portable LED Light Kit - RealTree® Max-4 Camo Features: Water-resistant bow and stern navigation lights Attwood's most durable, portable LED navigation light engines Sealed electronics, built to last in harsh conditions 150+ hour run-time on three AAA batteries (not included) Heavy-duty c-clamp

Combination Bow Light - Low Profile Low Profile Combination Bow Light is for replacement of existing lighting (not for new construction). Constructed of die cast chrome zinc. Lens can be reversed for under mounting. Installs with two #10 FH fasteners (not included). Recommended for fresh water use. These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but do meet the USCG 33 CFR/ABYC A-16 from 1997. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Submersible LED Trailer Light Kit For use with trailers under 80 inches wide. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards. Kit Includes: (2) multi-functional (stop/tail/turn) submersible LED trailer lights  License plate bracket Wiring harness and installation hardware

Submersible Trailer Light Kit Applicable to trailers under 80 inches wide. Ideal for utility, snowmobile, camping, motorcycle, and boat trailers. Design conforms to applicable US FMVSS and Canadian CMVSS safety standards. Complete Kit Includes:  A pair of 8-function stop/tail/turn lights, wiring harness, and license plate bracket

Portable Low Profile Fuel Tank - 12 Gallon with Gauge Attwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space. Features:  12 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittings High-Contrast, easy to read gage Save space; the low profile is 3 inches lower than regular 12-gallon tanks Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 24" Width: (inch) 18" Height: (inch) 11.61" *No fuel line included

LED 3-Mile Transom Light Part #: 6556-7 For pleasure craft up to 164 ft. (50m) in length, Attwood offers one of the first 3NM LED transom navigational lights. Creating 135 degrees of light at 3NM of visibility, Attwood's proprietary optics design focuses the light aft, keeping the operator in a "shadow". A truly unique design, Attwood's transom light includes a luxurious electropolished stainless cover that is both durable and great looking. Attwood wraps it all together with an easy to install, "surface mount" design that utilizes a snap feature to eliminate exposed fasteners. 3 inch diameter. 1.5 watts at 12 VDC, compatible with both Attwood and Perko mounting holes. Lights are rated for 50,000+ hours of use and feature a 10 year warranty. Features: Stainless Steel 1.5W at 12VDC 135 degrees 3nm 10-Year Warranty

LED All Around Light - 24" Pole Attwood's LED All-Round Light uses the very latest in bright white LED technology. 30% brighter than traditional LED lights with 60% lower mass which eliminates wobble. Improved lens technology provides a cleaner light transmission. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. Provides 2-mile, 360° visibility for boats up to 39.4' (12M). Lights are completely sealed and watertight. Two pin w/locking collar 24" pole length 3 watts at 12VDC WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED All Around Light - 36" Pole Attwood's LED All-Round Light uses the very latest in bright white LED technology. 30% brighter than traditional LED lights with 60% lower mass which eliminates wobble. Improved lens technology provides a cleaner light transmission. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. Provides 2-mile, 360° visibility for boats up to 39.4' (12M). Lights are completely sealed and watertight. Two pin w/locking collar 36" pole length 3 watts at 12VDC WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED All Around Light - 42" Pole Attwood's LED All-Round Light uses the very latest in bright white LED technology. 30% brighter than traditional LED lights with 60% lower mass which eliminates wobble. Improved lens technology provides a cleaner light transmission. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. Provides 2-mile, 360° visibility for boats up to 39.4' (12M). Lights are completely sealed and watertight. Two pin w/locking collar 42" pole length 3 watts at 12VDC WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

LED All Around Light Attwood's LED All-Round Light uses the very latest in bright white LED technology. 30% brighter than traditional LED lights with 60% lower mass which eliminates wobble. Improved lens technology provides a cleaner light transmission. LED technology keeps lights cool to the touch and is rated for 50,000+ hours of use. Provides 2-mile, 360° visibility for boats up to 39.4' (12M). Lights are completely sealed and watertight. Wake Tower Light Waterproof White LED 3W at 12VDC

Flex-Fit™ PRO Polyester Size 6 Boat Cover for V-Hull Low Profile Cuddy Cabin Boats I/O or O/B - Grey *19'-22' Centerline Length *102" Max Beam Width Available in 10 sizes that fit practically all 14 – 23 foot boats. Economically priced, our Flex-Fit™ PRO universal cover is an excellent choice for storage and trailering. Our Flex-Fit™ PRO boat covers feature a strong and durable 1/4″ shock cord encased into the hem for a snug fit. One tie-down kit is included for quick and easy tie-down. Mesh Storage bag is included. Poly-Flex II - Economically-priced 5.3 oz. Solution-Dyed Marine Polyester with urethane coating. Lightweight and strong. Good resistance to tearing. Durable water repellency, UV and mildew resistant finish. Breathable to help allow interior moisture to escape. Designed and sewn in the USA. (3 Year Limited Warranty). Boat Types: V-Hull Low-Profile Cuddy Cabin Boats I/O or O/B Features: Construction - Join seams are folded four-ply. No raw edges  Stitching - Double stitch construction for added strength and durability  Weather Resistant - Anti-wick thread throughout construction  Double Reinforced - Tie-down loops sewn into hem  Best Warranty in the Business - Best Warranty in the business based on fabric selection All Carver Covers are Made in the USA

Portable Low Profile Fuel Tank - 12 Gallon without Gauge This Attwood 12-Gallon Fuel Tank is ideal for use in a pontoon boat, where greater fuel capacity is commonly desired for extended days on the water. This durable, sturdy tank is EPA-compliant and it features a low-profile design. It does not have a fuel gauge. Features:  12 Gallon fuel capacity Low-profile design Compatible with 1/4-inch NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 24" Width: (inch) 18" Height: (inch) 11.61" *No gauge or fuel line included