|
RAM Composite Twist Lock Suction Cup Mount w/ Diamond Adapter
Description:
The RAP-B-166-2U consists of a 2.75" suction cup twist lock base, double socket arm and diamond base adapter. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
22.02 |
|
|
Ram Mounts
Looking for all the Ram Mount products we carry them. You can find them all right here in our Ram Mount Store Aqua Box Mount section. With everything from camera mounts to vehicle mounts including cell phone mounts, you will have plenty of choices to consider and options to choose from. Ram Mounting Systems is a quality manufacturer of all kinds of different mounts for your watercraft. You can get cell phone mounts and drink cup mounts here, along with GPS mounts and fishing rod holders. There are even iPad/iPhone/iPod mounts so you do not have to worry about having your electronics safe but close at hand.
If you have a kayak we have kayak mounts, too, and you can even do some work or surf the internet with laptop mounts to choose from. Of course, you want to make sure you choose a good marine electronics mount for your equipment, so you do not risk losing anything vital. Tablet mounts, swing arm mounts, surface mounts, and suction cup mounts are all available, and we have seat mounts, as well. You can even choose from motorcycle mounts, and rail/handle bar mounts to ensure you have everything you need your all of your future adventures.
|
|
|
Suction Cup Mounts from Ram Mount
|
|
|
Double Suction Cup Base
RAM suction cups are regarded as one of the most impressive suction cups in
the world. The incredible holding power is surprising when considering how
most suction cups function. When two suction cups are used together the
performance is amazing. The RAM Double Suction Cup Base is an amazing
innovation in suction cup mounting.
Features:
Double Suction Cup Base
Dual Suction Cups provide extra strength and stability
Dual Suction Cups for redundancy
High strength materials maximize longevity of the mount
Made in the U.S.A.
|
27.32 |
|
|
Dual Suction Cup Base with Medium Length Arm & Retention Knob
The RAM-B-189B-201-ALA1-KRU consists of a double 3.3" twist lock suction cup base that is connected to the diamond base with 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
The ball on this base connects to the standard length double socket arm with retention knob. A single spring inside the arm opens the end sockets, allowing you to pivot the ball and socket connection. The knob extension allows for easy adjustment of the mount and prevents over loosening of the knob. This socket technology allows for almost infinite adjustment and perfect viewing angles.
Features:
Material: High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size: 1" Rubber Ball "B" Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.23 lbs.
|
86.48 |
|
|
Triple Suction Cup Base with 1.5" Ball
The RAM-224-3U consists of a triple suction cup base with 1.5" diameter ball. The RAM-224-3U is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the RAM-224-3U on a glass or non-porous plastic surface.
Features:
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 1.14 lbs.
|
47.69 |
|
|
ROKK Mini Mount Kit - Suction Cup Mount - Phone Clamp
The ROKK Mini universal phone mounting kit is the toughest mounting system for your telephone.
The hi-performance ROKK mini modular system allows you to attach your electronics to boats, cars, off-road vehicles, aircraft and more. Move your electronics conveniently between different types of base mounts in different locations in one easy click.
Want to unlock multiple mounting options in different locations or simply mount a different electronic device? Just add another top or base to your modular kit and extend possibilities of your ROKK mini starter kit.
This three (3) part kit installs in minutes and allows quick release of mounted equipment.
Features:
Engineered to withstand high shock loading.
Secure mount for smart phones, handheld GPS and other small devices.
Base secures to with included hardware.
In the Box:
RLS-405 ROKK Mini Suction Cup Mount
RL-509 ROKK Universal Phone Clamp
RLS-AM ROKK Mini Adjustable Arm
*Sold as a Kit
|
84.18 |
|
|
Triple Suction Cup Base with AMPs Hole Pattern without Ball
The RAP-365-224-1BU consists of a triple 3.3" twist lock suction cup base with plate that contains the universal AMPs hole pattern. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
Specifications:
Material: High Strength Composite
Note: The "U" in the part number reflects product packaged in poly bag
Weight: 0.71 lbs.
|
36.23 |
|
|
Triple Suction Cup Base with 1.5" Diameter Ball
The RAP-365-224-1U, triple suction cup base, consists of a 1.5" ball base connected to a high strength composite base with three 3.3" diameter suction cup bases at each end. This base has a suction grip, allowing for the connection with 1.5" double socket arms to any non-porous surface, like a windshield, with confidence.
Specifications:
Material: High Strength Composite and Powder Coated Marine Grade Aluminum
Ball Size:1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag.
Weight: 0.93 lbs.
|
50.84 |
|
|
RAM 3" Diameter Suction Cup w/1" Plastic Ball
Part #: RAP-B224-2U
Color: Black
Ball Size: 1"
Material:: High Strength Composite
|
12.62 |
|
|
RAM Twist Lock Suction Cup with Double Socket Arm and Diamond Base Adapter
The RAM-B-166U, twist lock suction cup mount consists of a 3.25" suction cup locking base and diamond plate end. The mount is designed with a RAM 1" diameter rubber ball and socket system that has adjustment point at the cradle plate and base. Simply attach the suction cup base to the windshield of your vehicle for an easy and safe way to view your iPhone in your vehicle. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials ensure your iPhone is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device.
Overall Length:
6.75"
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. This mount does not require any drilling for installation.
|
35.40 |
|
|
Suction Cup Mount
Navigate with your zūmo® device in your vehicle with this suction cup mount. Take advantage of zūmo® 350LM's versatility. Move your zūmo from your motorcycle to your car dashboard or windshield with this automotive suction cup mount.1
1 Notice regarding windshield mounting legal restrictions:
Before using the suction cup mount on your windshield, check the state and local laws and ordinances where you drive. Some state laws prohibit drivers from using suction mounts on their windshields while operating motor vehicles. Other state laws allow the suction mount to be located only in specific locations on the windshield. Many other states have enacted restrictions against placing "non-transparent material" on the windshield or placing objects on the windshield in locations that obstruct the driver's vision.
Compatible Devices:
zūmo® 350LM
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
19.19 |
|
|
Portable Navilight 360° 2NM Rescue - Glow In The Dark - Green w/Bendable Suction Cup Mount
The Navilight 360° Rescue Edition 2NM - US Coast Guard approved for 2 nautical miles is based on the Navi light 360° 2NM and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. Additionally it is fitted with a glow in the dark circle around the switch. These unique glow pigments glow for 8 hours after only 10 minutes of exposition to daylight. This and the emergency green color of the body, makes Navi light 360° Rescue Edition 2NM extremely easy to locate, day and night. It uses super bright LED light, is water proof, floats and attaches almost anywhere through its double magnetic mounting system.
Examples of usage:
*Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs
In a vessel of 12M or more in length but less than 50M in length:
As Sternlight
As Flashing light
As All-round light
In vessels of less than 12M in length:
As Masthead light
As Sternlight
As All-round light
Specifications:
USCG Approval, 2 Nautical Miles
5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light
Floatable, waterproof (20M) and air-tight
Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
Powered by three AAA batteries (not included)
Size: H = 35mm, Diameter = 68mm
Weight (net): 115g
Modes / approximate burn time:
16 white LED, 360° All-round light, Anchoring light / 15hrs
16 white LED, 360° Flashing light / 85hrs
10 white LED, 225° Masthead light / 24hrs
6 white LED, 135° Sternlight / 32hrs
4 white LED, 360° Cabin light / 72hrs
Bendable Suction Mount
Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.
Examples of Usage:
Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:
The outboard engine
The steering console, the windshield or any place on the hull where the lights are seen best
On canoes and kayaks with a smooth and flat surface
Specifications:
Secure suction cup base
Quick release suction cap
Bendable shaft moves through 180°
Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces
Size: L = 68mm, H = 157mm
Weight (net): 80g
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
127.78 |
|
|
Portable Navilight 2NM - TriColor w/Bendable Suction Cup Mount
The Navilight Tricolor 2NM - US Coast Guard approved for 2 nautical miles includes a green light to be shown at the starboard side and a red light to be shown at the port side. In addition, it includes the white Sternlight, to be used at the stern. It is battery operated, uses super bright LED light, is water proof, floats and attaches almost anywhere through its double magnetic mounting system.
The green as well as the red lights show an unbroken light over an arc of the horizon of 112,5°. The white Sternlight shows an unbroken light over an arc of the horizon of 135°. All lights work independently, in a combination of all three or red/green together.
Examples of usage:
*Based on the Convention on the International Regulations for Preventing Collisions at Sea, commonly called 72 COLREGs
On a power-driven vessel of 12M or more in length but less than 50M in length:
As green or red sidelight
As sternlight
On a power-driven vessel of less than 12M in length:
as green or red sidelight
as combined green / red
as sternlight
On a sailing vessel underway:
as green or red sidelight
as sternlight
On a sailing vessel of less than 20 meters in lengths as backup light:
Tricolor lantern at or near the top of the mast
Specifications:
USCG Approval, 2 Nautical Miles
5 Modes: Tricolor Masthead light (135° white, 112,5° red, 112,5° green), BiColor side light, red side light, green side light, white Sternlight
Floatable, waterproof (20M) and air-tight
Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
Powered by three AAA batteries (not included)
Size: H = 35mm, Diameter = 68mm
Weight (net): 118g
Modes / approximate burn time:
16 green / red / white LED, 360° TriColor lantern / 12hrs
10 green / red LED, 225° Bi-Color sidelight / 20hrs
5 green or 5 red LED, 112,5° sidelight / 38hrs
6 white LED, 135° Sternlight / 32hrs
Bendable Suction Mount
Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.
Examples of Usage:
Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:
The outboard engine
The steering console, the windshield or any place on the hull where the lights are seen best
On canoes and kayaks with a smooth and flat surface
Specifications:
Secure suction cup base
Quick release suction cap
Bendable shaft moves through 180°
Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces
Size: L = 68mm, H = 157mm
Weight (net): 80g
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
126.56 |
|
|
Portable Navilight 360° 2NM - White w/Bendable Suction Cup Mount
The Navilight 360° 2NM - US Coast Guard approved for 2 nautical miles is the most versatile light of Navisafes range of battery operated portable navigation lights and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. It uses super bright LED light, is waterproof, floats and attaches almost anywhere through its double magnetic mounting system.
Examples of Usage:
*Based on the Convention of the International Regulations for Preventing Collisions at Sea
On a power-driven vessel underway of 12 meters or more in length but less than 50 meters in length:
Sternlight
All-round white light
On a power-driven vessel underway of less than 12 meters in length:
Masthead light
Sternlight
All-round white light
On a power-driven vessel underway of less than 7 meters in length whose maximum speed does not exceed 7 knots:
All-round white light
Rowing/Paddle Vessels
All-round white light
Anchored vessels and vessels aground
Anchor lights must always be shown from sunset to sunrise
All-round white light
Specifications:
USCG Approval, 2 Nautical Miles
5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light
Floatable, waterproof (20 m) and air-tight
Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
Powered by three AAA batteries (not included)
Size: H = 35 mm, Diameter = 68 mm
Weight (net): 113 g
Modes / approximate burn time:
16 white LED, 360° All-round light, Anchoring light / 15hrs
16 white LED, 360° Flashing light / 85hrs
10 white LED, 225° Masthead light / 24hrs
6 white LED, 135° Sternlight / 32hrs
4 white LED, 360° Cabin light / 72hrs
Bendable Suction Mount
Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.
Examples of Usage:
Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:
The outboard engine
The steering console, the windshield or any place on the hull where the lights are seen best
On canoes and kayaks with a smooth and flat surface
Specifications:
Secure suction cup base
Quick release suction cap
Bendable shaft moves through 180°
Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces
Size: L = 68mm, H = 157mm
Weight (net): 80g
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
116.96 |
|