|
RAM Chrome Motorcycle Brake/Clutch Reservoir Base w/1" Ball
The RAM-B-309-1CHU connects to your handlebar clutch/brake clamp, left or right side, and holds one 1" diameter mounting ball. The chrome base fits the control clamps on your motorcycle with 40mm x 6mm stainless steel hardware, provided in the kit. To see if the RAM-B-309-1CHU base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
34.28 |
|
|
RAM 1.5" Ball Mount with 6.25" X 2" Rectangle Base, Double Socket Arm & Track Ball™ Base
The RAM-111B-354-TRA1U consists of a Track Ball™ base that can attach to any track system including the RAM Tough-Track™. Connected to the base is a standard length double socket arm and 6.25" x 2" rectangle plate for supporting a wide range of fishfinders and chartplotters. The rectangular plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts, including Marine GPS, CB Radios, Ham Radios, Gimbal Brackets and more.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
Part number reflects product packaged in clear polybag for store shelf display. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
|
51.59 |
|
|
RAM Combination Brake/Clutch Reservoir U-Bolt Mount with Diamond Base Adapter
Simply attach the RAM ball base to the brake/clutch handlebar control bracket and the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your Apple Touch is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device. Cutting edge products like the Apple Touch deserve a cutting edge mount and RAM delivers.
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. To see if the (RAM-B-309-1U) base will mount to your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94" and a maximum of 1.58".
|
37.26 |
|
|
RAM 1" Diameter Ball Mount with 2.5" Flex Adhesive Base & Diamond Base Adapter
The RAP-B-378-238U consists of the flex adhesive base with 1" ball, STANDARD SIZE double socket arm and and diamond base adapter. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The hole pattern found on the diamond base adapter will connect to most RAM cradles. The included RAM's patented design dampens shock and vibration, helping to extend the life of your device. Using a PSA stick pad, put the flex adhesive mount practically anywhere you want to keep your portable electronics easy to see and always within your reach. Designed with a very small foot print, finding a home on your scooter, motorcycle, kayak, boat or vehicle dash is easy. Attaching the patented 1" rubber ball, to one of many RAM arms, creates the ultimate socket system with multiple adjustment points for articulation and perfect viewing angles.
Material:
High Strength Composite
Ball Size
1" Rubber "B" Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
24.05 |
|
|
The u-bolt base makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles. High quality materials insure your device is safe, secure, and within easy reach. RAM's design also dampens shock and vibration helping to extend the life of your mobile device. Included in this package is hardware that accommodates rails from 0.75" to 1.25" in diameter.
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag. If you prefer a motorcycle mount with stainless steel hardware, view the RAM-B-149U. To accommodate rails smaller than 0.75" in diameter RAM provides the extension RAP-319U.
|
32.66 |
|
|
Tough-Claw Mount w/Self-Leveling Cup Holder
The RAM-B-132-400U consists of the small Tough-Claw base and universal self-leveling drink cup holder. The drink cup holder has two pivot points, allowing for your drink to always stay upright and never spill. Cozy is included with purchase of the RAM-B-132-400U. This mount rotates 360 degrees.
The RAM-B-132-400U includes the RAM Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars and flat surfaces. The compact design allows easy installation in a wide variety of applications including motorcycles, kayaks and boats, bicycles, wheelchairs, medical carts and more. The marriage of tool-less removal and a low-profile makes this must have accessory easy to pack with you wherever you go.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Material:
High Strength Composite & Stainless Steel
Note:
The "U" in the part number reflects product packaged in poly bag.
|
28.57 |
|
|
Tough-Claw Mount w/Universal X-Grip Phone Holder
The RAM-HOL-UN7-400U consists of the small Tough-Claw base and universal X-Grip holder. The X-Grip holder has a clean and clever four leg design that sports great holding power without hiding your smart-phone behind foam pads and plastic. The X-Grip holder expands and contracts for perfect fit of most smart phones. This mount rotates 360 degrees.
The RAM-HOL-UN7-400U includes the RAM Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars and flat surfaces. The compact design allows easy installation in a wide variety of applications including motorcycles, kayaks and boats, bicycles, wheelchairs, medical carts and more. The marriage of tool-less removal and a low-profile makes this must have accessory easy to pack with you wherever you go.
Clamping Range (Rail/Tube Surfaces):
0.625" to 1.5"
Clamping Range (Flat Surfaces):
0" to 1.14"
Holder Dimensions:
Minimum Width = 1.875"
Maximum Width = 3.25"
Depth = 0.875"
Material:
High Strength Composite & Stainless Steel
Note:
The "U" in the part number reflects product packaged in poly bag.
|
51.37 |
|
|
RAM 1.5" Ball Marine Electronic "Rugged Use" Mount f/the Lowrance Elite 5 Series
Part #: RAM-101-LO11
The RAM-101-LO11 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and adapter base that inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1.5" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
This mount is compatible with the following electronic devices:
Lowrance Elite-5
Lowrance Elite-5M
Lowrance Elite-5X
Raymarine Apelco Fishfinder with matching hole pattern
Ball Size:
1.5" Rubber Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display. RAM recommends this mount for "Rugged Use" mounting applications, including heavy weight Lowrance Elite and Mark Fishfinders.
|
51.59 |
|
|
RAM 1" Ball Marine Electronic "Light Use" Mount for the Lowrance Elite-4 Series
Part #: RAM-B-101-LO11
The RAM-B-101-LO11 consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and adapter base that inserts directly to the back of Lowrance Elite 4 and Mark-4 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Designed into the mount is a 1" diameter patented rubber ball and socket system with adjustment points at both socket ends of the arm; this with RAM's rubber ball and socket technology allows for almost infinite adjustment and perfect viewing angles.
This mount is compatible with the following electronic devices:
Lowrance Elite-4
Lowrance Elite-4 DSI
Lowrance Elite-4 Gold
Lowrance Elite-4x
Lowrance Elite-4x DSI
Lowrance Elite-4m
Lowrance Mark-4
Ball Size:
1" Rubber "B" Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
Part number reflects product packaged in clear clam shell for store shelf display. RAM recommends this mount for "Light Use" mounting applications, including light weight Lowrance Elite and Mark Fishfinders.
|
35.11 |
|
|
RAM Pin-Lock™ Security Kit and 1.5" Diameter C Size Mount for Gimbal Brackets
The RAM-SG-111U consists of a 2.5" diameter round base, STANDARD LENGTH double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security™ nut/knob and key knobs for Gimbal Brackets. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price. The included threaded key knob replaces the gimbal knob, assuring your mounted electronic device is safe from theft and tampering.
Features
Overall Height:
7.35"
Weight Capacity:
Up to10 lbs
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
67.36 |
|
|
RAM Transducer Arm Mount with Open Single Socket: Compatible with all RAM 1" Ball Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to a 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer.
Compatible Transducers:
The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw.
Features:
1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location
2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm
3. Quality materials prevent corrosion and keeps your transducer arm mount
4. Lifetime warranty
Material:
High Strength Composite and Aluminum Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.
|
44.42 |
|
|
RAM Transducer Arm Mount with 18" Rigid Aluminum Rod and Open Single Socket: Compatible with all RAM 1" Ball Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. This transducer mount enables quick, effective deployment and retrieval of your Lowrance StructureScan LSS transducer, while protecting it from damage. Perfect for kayak applications, the included rigid mounting arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the transducer mount can quickly be moved to a different kayak with an existing 1" RAM ball. Add a RAM ball mount for the Lowrance HDS-7 Fishfinder, and you have a complete mounting solution for your next fishing adventure.
Compatible Transducers:
Lowrance StructureScan LSS-2
Lowrance StructureScan LSS-1
Features:
18" rigid aluminum rod can be bent to position your transducer to its optimum location
Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm
High quality materials prevent corrosion
Compatible with the Yakattack 1" screw ball
Lifetime warranty
Made in U.S.A.
Material:
High Strength Composite and Aluminum Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.
|
51.71 |
|
|
RAM Transducer Arm Mount with Male Wedge Base and 1" Ball: Compatible with Hobie and Scotty Wedge Hole Bases
Kayak fishing is all about adaptability. RAM Mount offers the widest selection of kayak fishing accessories to adapt to a wide range of fishing scenarios. RAM now offers a deployable transducer arm for kayaks. This solution enables the quick and effective deployment and retrieval of your transducer, while protecting your transducer from damage. Perfect for kayak applications, the transducer arm can quickly be retrieved if you enter shallow water or when beaching your kayak. With little effort, the arm can quickly be moved to a different kayak and attached to an existing flush mount or 1" RAM ball. The unique design provides a universal solution for virtually any kayak as well as any transducer.
Compatible Transducers:
The RAM transducer arm mount is compatible with all transducers that contain a 1/4" screw.
Features:
1. 18" rigid aluminum rod can be bent to position your transducer to its optimum viewing location
2. Patented socket technology allows for quick raising, lowering, removal and stowage of transducer arm
3. Quality materials prevent corrosion and keeps your transducer arm mount
4. Compatible with Hobie and Scotty wedge bases
5. Lifetime warranty
Material:
High Strength Composite and Aluminum Steel
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in clear clam shell for store shelf display. Transducer device not included with purchase.
|
54.77 |
|
|
RAM Pin-Lock™ Security Kit and 1.5" Diameter Ball Mount with 6.25" X 2" Rectangle Plate
The RAM-S-111U consists of a 2.5" diameter round base, STANDARD LENGTH double socket arm, 6.25" x 2" rectangle base, RAM mixed combination Pin-Lock security™ nut and key knob. The 6.25" x 2" rectangle base is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are commonly used. With an emphasis on aesthetics and function, RAM® security nuts/knobs are low profile and only add a small amount of additional bulk to your system when compared to the standard knob included. At a fraction of the cost of currently available keyed locking knobs, the additional peace of mind and tamper resistance comes at a very affordable price.
Features
Overall Height:
7.35"
Weight Capacity:
Up to 10 lbs
Material
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1.5" Rubber Ball Size
|
55.60 |
|
|
LED Spotlight Mount with Medium Size Tough-Claw™
The RAM Mounts LED Spotlight has been completely redesigned. We have integrated a new LED bulb that yields a brighter and more efficient light that enables you to add safety and lower power draw to your ATV, boat or vehicle. The weather-resistant body shields the 30° spot light LED bulb, which yields a wider and brighter range of light, from the elements. The long cord with standard 12v plugin means you can mount the light from nearly any location.
The RAM-B-152-404 includes the Medium RAM® Tough-Claw; the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 1" to 1.875" outer diameter. Perfectly suited for mounting on any handlebars, roll bars and much more, the RAM® Tough-Claw™ with LED Spotlight will soon become another essential RAM® component in your collection of mounting options.
Clamping Range (Rail/Tube Surfaces):
1" to 1.875"
Clamping Range (Flat Surfaces):
0" to 1.6"
Bulb Specifications:
PAR36
12 Volts DC
9 Watts
1900 Lumens
Sealed Beam
30-Degree Spot Light
Frosted Lens
4500K Color Temp
Tough-Claw™ Features:
High strength glass filled nylon construction with corrosion resistant stainless steel hardware
Rubber pads provide stable, even gripping and protection of mounting surface
Clamp jaw is configured for round, flat and odd shapes
Quick installation and removal of Tough-Claw™
Lifetime Warranty
Made in U.S.A.
Material:
Powder Coated Marine Grade Aluminum and High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
115.80 |
|