|
Sherwood P1016 Engine Cooling Pump
The Sherwood P1016 flexible impeller engine cooling pump replaces the Sherwood pump P1016-01
Applications for the Sherwood P1016 pump include: Cummins QSD 2.0 & 2.8 engines, replaces Cummins 854179001, Mercury MerCruiser 879312023 and 854179001 pumps.
This is a genuine Sherwood P1016 flange mounted boat engine cooling pump, using raw water intake (river water or sea water) to cool the engine. The Sherwood P1016 is supplied complete with a 12 vane through key drive flexible neoprene impeller.
The raw water engine cooling pump is the heart of the marine engine, supplying a continuous flow of raw water to maintain temperatures consistent with the demanding engine performance. Over the years, Sherwood raw water pumps have developed a reputation of excellence in quality; and today are chosen for their performance and dependability by the most prestigious marine engine manufacturers.
Sherwood pumps are one of the largest suppliers of flexible rubber impeller cooling pumps for marine engines in the USA. They can be found fitted on some of the most well known engine brands in both pleasure and commercial boats.
To ensure that your boat engine cooling pump performs as required, regular preventative maintenance and inspection should be carried out. The Sherwood engine cooling pump impeller should be replaced every 3 - 12 months depending on application.
|
452.05 |
|
|
Jabsco 17360-1001 Engine Cooling Pump
For Detroit Diesel, V-71-92, 23507475, 23507476, 23507477, 23507973
Caterpillar, D-336, D-343, D-353, 3N1888
Some Stewart & Stevenson Marinizations of Detroit Diesel Engines.
Pump Body: Bronze
Port Size: 2-1/2" Flange Type
Impeller: Neoprene use Jabsco 17370-0001-P Impeller
Cam: Wear Resistant Polyurethane Cam/Liner
Shaft Seal: Mechanical Face Seal
Shaft: 316 Stainless Steel
Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Bronze flexible impeller engine cooling pump
Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Minor plumbing modifications may be required for certain applications.
Jabsco Engine Cooling Pump, 6 cover screws with double flat Impeller drive
|
3112.95 |
|
|
Jabsco 1673-1003 Pump 1/2" Ped Mt
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Impeller: Nitrile
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene or Nitrile (Oil Resistant)
Shaft Seal: Lip Seal or Mechanical seal, Buna N
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Lip Seal Nitrile Impeller
|
447.01 |
|
|
Jabsco 1673-2001 Pump 1/2" Npt Neo W/Mech Sl
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene
Shaft Seal: Mechanical seal
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of a flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Mechanical Seal Neoprene Impeller
|
543.35 |
|
|
Engine Cooling Pump for Kohler 4-6 Cylinder Diesel - 4-6.5kW Gas - 12.5 kW Gas
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
4-6 Cylinder Diesel
4-6.5 kW Gas
12.5 kW Gas
Replaces Pump:
Kohler - 267373, 246489, 344089 (Impeller Kohler 229826)
Sherwood - G907P (Impeller Sherwood 9959K)
|
241.37 |
|
|
Engine Cooling Pump for Kohler
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
N/A
Replaces Pump:
Kohler - GM46936, GM344371 (Impeller Kohler 229826)
Sherwood - G910P (Impeller Sherwood 9959K)
|
241.37 |
|
|
Engine Cooling Pump for Kohler - 5-7 Diesel kW
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
Kohler 5-7 KW Diesel
Replaces Pump:
Kohler - 28487 359341 GM28487 (Impeller Kohler 359978)
Sherwood - G8001 (Impeller Sherwood 8000K)
|
196.96 |
|
|
Engine Cooling Pump for Kohler - 5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, & 8EFKD
Albin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.
For Engine Models:
5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, and 8EFKD
Replaces Pump:
Kohler - GM63535 (Impeller Kohler 359978)
Sherwood - G8005 (Impeller Sherwood 8000K)
|
209.82 |
|
|
Jabsco 17540-0201 Engine Cooling Pump
Jabsco 17540-0201 is a Detroit Diesel marine engine cooling pump
Impeller: Neoprene
Shaft Seal: Carbon/Ceramic Mechanical Seal
Port Size: 3 Inch
This is the Marine Engine Cooling Pump for Detroit Diesel Series 60 Engines, Detroit Diesel pumps 23525200, 23522735, 23535447.
|
3971.18 |
|
|
Sherwood G-30-2B Engine Cooling Pump All Bronze
FEATURES
Pump Body:
Bronze
Ports:
1" Hose
Cam:
Full
Impeller:
Neoprene
Shaft Seal:
Mechanical
Drive:
Bracket Mount Pulley Drive.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
All Bronze version of Sherwood G-30-2.
Sherwood Engine Cooling Pump All Bronze for G30-2B G-30-2B, Chris Craft and Volvo Penta Model 350 16.80-18346
|
818.46 |
|
|
Sherwood P1733X-J Engine Cooling Pump JPR-S7633
JPR-S7633 John Deere Replacement Engine Cooling Seawater Pump
See: https://www.clrmarine.com/m4/JMPMA%20JPR-S7633--jmp-marine-jpr-s7633-john-deere-re515657-dz114697-engine-cooling-pump.html
|
871.01 |
|
|
Engine Cooling Recirculating Pump
More Info: Big Block GM 454 502 7.4L 8.2L 10117819 6269358, Mercruiser 409 - 454 17670 67859 811573, OMC 409 - 454 987447, Pleasurecraft RA057018
PUMP TYPE
Chevy Small Block, Large Block and 8.1L Recirculating Pumps
APPLICATIONS / CHARACTERISTICS
New bi-rotational recirculating pumps manufactured with brass impellers, plugs and fittings, premium coated castings, upgraded marine mechanical seal and all required mounting gaskets.
|
189.37 |
|
|
Engine Cooling Recirculating Pump
More Info: Chevy 500 CID 8.1L 12561326
PUMP TYPE
Chevy Small Block, Large Block and 8.1L Recirculating Pumps
APPLICATIONS / CHARACTERISTICS
New bi-rotational recirculating pumps manufactured with brass impellers, plugs and fittings, premium coated castings, upgraded marine mechanical seal and all required mounting gaskets
|
246.66 |
|
|
Engine Cooling Recirculating Pump
More Info: 4 & 6 Cylinder GM, Mercruiser 110 120 140 165 65142A1 814755, OMC 110 120 140 165 984360 896779
PUMP TYPE
4 and 6 Cylinder Chevy Block Recirculating Pumps
APPLICATIONS / CHARACTERISTICS
New recirculating pumps manufactured with brass impellers, plugs and fittings, premium coated castings, upgraded marine mechanical seal and all required mounting gaskets
|
121.33 |
|
|
Engine Cooling Recirculating Pump
More Info: Small Block Chrysler 273 318 340 360 3004886 3745985, Volvo AQ200-311 835390-6 856364-5
PUMP TYPE
Chrysler Block Recirculating Pumps
APPLICATIONS / CHARACTERISTICS
New bi-rotational recirculating pumps manufactured with brass impellers, plugs and fittings, premium coated castings, upgraded marine mechanical seal and all required mounting gaskets.
|
210.57 |
|