|
Aluminum Clamp-on Rod Holders
Model: RA5004SL
Color: Silver
Fits: 1.900" O.D. Pipe
Mount: Vertial
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5205SL
Color: Silver
Fits: 2.375" O.D. Pipe
Mount: Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.315 O.D. Pipe
Color: Black
Pipe Size: #2
Fits: 1.315" O.D. Pipe
Mount: Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. Pipe
Color: Black
Pipe Size: #3
Fits: 1.660" O.D. Pipe
Mount: Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D.
Pipe
Color:Black
Pipe Size:#5
Fits:2.375" O.D. Pipe
Mount:Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.050" O.D. Pipe
Color:Black
Pipe Size:#1
Fits:1.050" O.D. Pipe
Mount:Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.315" O.D. Pipe
Color:Black
Pipe Size:#2
Fits:1.315" O.D. Pipe
Mount:Horizontal
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are
functional. With no hassle or wear and tear on your boat you can install
these rod holders with only an Allen Wrench. No lengthy trips to the tower
builder for custom installation at custom prices. Simply place the two
halves of the clamp around the pipe, insert the bolts and tighten. Install
them wherever you like. If later, you don't like the position, simply move
them.
These Rod Holders are the perfect solution for boats with wiring or
hydraulic lines inside their tower legs. Now you can install Rod Holders on
your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any
structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping
portion of the Rod Holder is precision made for an exact fit. Four Marine
Grade Stainless Bolts assure an even clamping pressure and a secure bond.
The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
115.38 |
|
|
Backing Plate for 70 Series Rod Holders
Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders, or perhaps even tear through, causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and one for 80 series rod holders. Each size fits all 3 models of the series.
Features:
Use this backing plate for all 70 series rod holders (53670A, 53670CA, 53671A, 53671CA, 53672A, and 53672CA)
316L cast stainless steel
4" x 5-1/4"
4mm thick
Use your 1/4" stainless bolts and nuts (hardware not included)
|
21.31 |
|
|
Backing Plate for 80 Series Rod Holders
Backing plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 series rod holders. Each size fits all 3 models of the Series.
Features:
Use this backing plate on all 80 series rod holders (53680CA, 53680SA, 53681CA, 53681SA, 53682CA, and 53682SA)
316L cast stainless steel
4-1/4" x 6"
4mm thick
Use your 1/4" stainless bolts and nuts (hardware not included)
|
24.61 |
|
|
Heavy Duty Pro Series Rod Holders
The Pro Series line of molded rod holders takes the Pro Series to the next level with the addition of the Combo Mount. All the Pro-Series unique features you've come to expect, with the ability to mount in multiple configurations.
Designed for use with casting and spinning rod holders. Heavy-duty, deep-tooth gear lock securely holds rod holder in mounting base.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
24.44 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 0°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
168.52 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 15°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
151.67 |
|
|
Large Stainless Steel Bolt-less Rod Holder - 30°
2020 IBEX Innovation Award Winner. This patent-pending rod holder is a game changer! Manufactured from investment cast stainless steel the innovative design combines the easy installation of a standard rod holder with the sleek look of a bolt-less rod holder. No special tools or fasteners are required. This rod holder features a removable and replaceable top flange for easy customization, replacement, or re-polishing. Closed-end with threaded drain hole. This is the last rod holder you will need on your boat...ever!
Rupp heavy-duty rod holders are the perfect combination of form and function with an exclusive forged end cap that gives unbreakable rod support while providing a completely finished look and mirror-like finish
These larger diameter rod holders are available at 0° 15° & 30° angles.
To be used with the Large Stainless Steel Backing Plates 10-1476-40.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
151.67 |
|
|
ShadeFin Mini Rod Holder Mount
Designed for standard rod holders, the ShadeFin Mini Rod Holder Mount is a simple solution for adding boat shade onboard. Simply insert the mount at the bottom edge of the post, tighten it until snug, and attach ShadeFin Mini. The ShadeFin mini rod holder mount can safely remain in the rod holder when not in use or be easily removed by loosening and stowing.
Features and Benefits:
Fits standard rod holders with an inside diameter of 1.75" or greater
Constructed out of aluminum-grade 6061 alloys
Includes a stainless steel Type-304 threaded rod with an injection-molded nylon cap
3-year limited warranty
Specifications:
Finish: powder-coated, misty silver
Length (inch): 9-1/4"
|
60.65 |
|
|
Aluminum Clamp-on Rod Holders
Model: RA5001SL
Color: Sliver
Fits: 1.050" O.D. Pipe
Mount: Vertical
JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.
These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.
All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling.
|
148.08 |
|