200WX WeatherStation® Instrument - Land-based, Mobile, Standalone The WeatherStation 200WX is the best choice for mobile, land-based, weather-monitoring applications. Sensor-rich, durable, rugged, small housing that is IPX6 rated, means the 200WX can be used on moving platforms such as TV news and military vehicles. Knowing the theoretical wind speed and direction is important and often mission-critical. The 200WX calculates the theoretical wind speed and direction based on the apparent wind (the wind you would feel on your hand if you held it out while moving), the speed of the vehicle, and the vehicle heading. Its internal 10 Hz GPS and three-axis electronic compass provides heading, position, speed-over-ground, and course-over-ground functionality that is necessary for theoretical wind-data processing on a moving vehicle. The 3D compass with dynamic stabilization provided by the three-axis rate gyro enhances the rate-of-turn data. The patented 200WX maintains dynamic compass performance in hilly and mountainous terrain—common in military situations. Features: Ultrasonic measurement of apparent and theoretical wind speed and direction Barometric pressure Air and wind chill temperature Relative humidity (field serviceable option) Calculated dew point and heat index GPS position, speed over ground, and course over ground Three-axis, solid-state compass with dynamic stabilization Three-axis rate gyro supplies rate-of–turn data Three-axis accelerometer for best-in-class pitch and roll information Housing IPX6 rated for water-ingress protection Data output via a single cable (various lengths available) NMEA 0183/ASCII serial data protocol over RS-232 interface NMEA 2000 protocol over CAN Options: Relative humidity module Enables dew-point and heat-index calculations Field serviceable WeatherStation housing rated IPX4 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Weather Instruments  

Ultrasonic Wind & Weather Antenna Maretron's outdoor weather station measures wind speed and direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed using ultrasonic sensors, which means there are no moving parts to wear out or get caught in the rigging. The WSO200 accurately measures wind speed and direction under a tilt of up to 30°, making it ideal for sail as well as power conditions. When used with Maretron's SSC300 compass and a display such as Maretron's N2KView® vessel monitoring system, or Maretron's DSM570 color graphics displays, the user will be able to view both apparent and true wind speed and direction as well as dew point and wind chill factor. The WSO200 mounts on a 1"-14 Standard Marine Mount.  The WSO200 is NMEA2000 * Cables sold separately  Features: Apparent wind speed Apparent wind direction Atmospheric pressure Air temperature Relative humidity

Outdoor Equipment and Supplies If you plan on spending time in the great outdoors, you need the right outdoor equipment. You also need supplies and provisions so you can be prepared while you are enjoying the water and the wilderness. The right accessories can make a big difference in how much fun you have, how safe you feel, and the overall experience you have. Binoculars are a great choice when camping, and we also offer emergency weather radio options, fishing accessories, and waterproof bags & cases for winter sports. Weather instruments are popular, as well, and can help you decide whether you should move your adventure to another day.   With the right choices for tents, watches that can provide you with more than just the time, night vision, personal locator beacons, medical kits, and metal detectors, you can be ready for almost anything. We also have a good line of knives, lighting, range finders, snowshoes, and sunglasses to complete your traveling or camping kit. With all the options to choose from, and with the brand name items we carry every day, you can be sure you have the opportunity to get all of the outdoor equipment, supplies, and provisions needed for the trip you have planned.

BARIGO: Design as a Key to Success Welcome to the World of BARIGO Precision Instruments.   Weather stations, barometers, thermometers, hygrometers, altimeters and compasses are BARIGO's strength.  Today, products need to be more than just functional. They have to be user-friendly, but most of all of have a pleasing and appealing design. BARIGO's design awareness is reflected throughout their range of products. The numerous design awards are living proof that BARIGO is on the right track.   BARIGO: Makes the Difference   BARIGO Instruments Stand for the Finest in Form & Function.   BARIGO has become the wide choice of marine instruments for demanding boat and yacht owners.  Whether traditional brass or cool chrome, whether mechanical or with modern electronics: each single instrument, whether hygrometer, barometer, thermometer or ship's bell clock is made in traditional Black Forest watchmaker quality.      Specials     Rebates    Close Outs     Remanufactured

keywords: onyx, foul weather gear, auto inflatable life jackets, manual inflatable life jackets, vests for fishing

Vantage Pro2 Wireless Weather Station with WeatherLink Console, 24hr Fan Aspirated Radiation Shield, UV & Solar Sensors The Vantage Pro2 weather station provides the technology and real-time data you need to respond to changing conditions and make timely decisions. Engineered to handle rugged environments and deliver data with scientific precision year after year, the economical Vantage Pro2 offers the professional weather observer, or serious weather enthusiast, a robust performance with a wide range of options and sensors. Complete Features: Accurate, reliable weather monitoring with real-time data updates every 2.5 seconds Outside temperature and humidity sensors in a 24-hour Fan-Aspirated Radiation Shield for maximum accuracy  Sensor suite also reports wind speed and direction, rainfall, UV and Solar radiation Industry-leading transmission range of 1,000’/300 m from the sensor suite to the console Mount the anemometer up to 40’/12 m from the rest of the sensor suite for flexible siting Sensor suite’s rugged, weather-proof housing gives you years of reliable data Includes WeatherLink Console (6313) with a vibrant, HD color touchscreen Sensor suite is solar-powered with battery backup; the console is AC-powered with battery backup WeatherLink Console The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud. WeatherLink Features: Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device Customize the dashboard to show up to 21 parameters – from temperature to the wind to rain – and see the information that matters to you Use the full database of historical records stored right on the console to create custom graphs and analyze your data Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most  The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely  24hr Fan Aspirated Radiation Shield: The 24-Hour Fan Aspirated Radiation Shield includes a solar- and battery-powered, motor-driven fan that draws a constant airflow through the sensor chamber. At night, when the effects of radiation are less, the fan runs on the battery. This provides more accurate temperature readings than passive shielding alone. 24hr Fan Aspirated Radiation Shield Features: A motor-driven fan draws a constant airflow through the sensor chamber at 500 feet per minute (2,5 m/s)  At night, when the effects of radiation are less, this solar-powered model runs on battery power and the airflow slows to 280 feet per minute (1,4 m/s)  Install your own sensor in the sensor chamber  Sensor chamber: (inch) 2.24” x 3” / (mm) 56.8 mm x 76.2 mm  Includes 10 plates, rechargeable batteries, mounting hardware, and 25 ft. (7,6 m) cable UV Sensor: Davis Instruments UV index sensor measures the sunburning portion of the UV spectrum. It measures global solar UV irradiance: the sum of the components of solar UV transmitted directly and those scattered in the atmosphere. It reports the UV index, dose rate, and daily and accumulative doses of UV light. This sensor is an excellent addition to the Vantage Pro2 weather station.  UV Sensor Features: Measures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose Diffuser provides excellent cosine response Measures global solar UV irradiance, which includes both directly transmitted and scattered UV Transducer responds only to radiation in the region of interest and is stable in the presence of heat and humidity Cutoff ring with a comb structure for cosine response of ± 4% FS Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust Solar-Powered Wireless Sensor Build a custom system with the sensors you need where you need them. Can support up to one each of five sensors: anemometer, rain collector, temperature probe or temperature/humidity, UV, and solar radiation sensors With an anemometer installed, you can replace your Vantage Pro2 or Vantage Vue anemometer with a remote wind station Industry-leading transmission range of 1,000’/300 m from the transmitter to a Vantage Connect, WeatherLink Live, or console Combine with WeatherLink Live to take full advantage of the Sensor Transmitter’s capabilities Weather-resistant shelter protects electronics Solar-powered with capacitor and lithium backup battery Battery easily lasts eight months without sunlight; more than two years depending on solar charging Easy installation with included mounting hardware One-year manufacturer’s warranty *Mounting hardware included; mounting pole sold separately

Vantage Pro2 Plus Wireless Weather Station with UV & Solar Radiation Sensors and WeatherLink Console Complete Features: Accurate, reliable weather monitoring with real-time data updates every 2.5 seconds Industry-leading transmission range of 1,000 ft. / 300 m from the sensor suite to the console The sensor suite includes outside temperature and humidity sensors in passive radiation shield, wind speed, and direction; rainfall; and UV and Solar radiation Sensor suite’s rugged, weather-proof housing gives you years of reliable data Mount the anemometer up to 40’/12 m from the rest of the sensor suite for flexible siting Includes WeatherLink Console (6313) with a vibrant, HD color touchscreen The sensor suite is solar-powered with battery backup; the console is AC-powered with battery backup WeatherLink Console The WeatherLink Console revolutionizes the way you access, analyze, and understand your hyperlocal weather data reported by your Vantage Pro2™orVantage Vue® sensor suite, or your custom network of multiple Davis sensors. One intuitive device lets you receive and display data from your local network and connect to Wi-Fi to push your data to the WeatherLink Cloud. WeatherLink Features: Use the vibrant HD touchscreen to easily navigate, view, and analyze your weather data on one intuitive device Customize the dashboard to show up to 21 parameters – from temperature to wind to rain – and see the information that matters to you Use the full database of historical records stored right on the console to create custom graphs and analyze your data Choose from hundreds of parameters and a dozen sounds to get notified about the environmental changes you care about most  The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely  Standard Radiation Shield The passive Radiation Shield protects temperature sensors from solar radiation and radiated or reflected heat sources. Standard Radiation Shield Features: A temperature probe placed in the direct sun, or where it is exposed to a radiant heat source such as a building or concrete will not provide accurate air temperature readings  This radiation shield is the most effective passive shield available  Multi-plate construction for maximum airflow  May be mounted on a metal pipe or wood surface Use with Wireless Temperature Station or Leaf & Soil Moisture/Temperature Station and all temperature sensors used to measure air temperature UV Sensor: Davis Instruments UV index sensor measures the sunburning portion of the UV spectrum. It measures global solar UV irradiance: the sum of the components of solar UV transmitted directly and those scattered in the atmosphere. It reports the UV index, dose rate, and daily and accumulative doses of UV light. This sensor is an excellent addition to the Vantage Pro2 weather station.  UV Sensor Features: Measures the sunburning portion of the UV spectrum. Allows you to display UV index, dose rate, and daily and accumulated dose Diffuser provides excellent cosine response Measures global solar UV irradiance, which includes both directly transmitted and scattered UV Transducer responds only to radiation in the region of interest and is stable in the presence of heat and humidity Cutoff ring with a comb structure for cosine response of ± 4% FS Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust Solar Radiation Sensor: Measures solar radiation for evapotranspiration (ET) and Temperature/Humidity/Sun/Wind (THSW) Index Diffuser element and housing are carefully designed for accurate cosine response Silicon photo diode provides a good match to the solar spectrum *Mounting hardware included; mounting pole sold separately

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting. As with all Nasa instruments - they are excellent value too. Technical Specifications: 40mm high characters Speed (Knots/m.p.h.) Trip Distance (N.Miles / Miles) Total Distance (N.Miles / Miles) Trend indicator shows acceleration / deceleration Selectable speed averaging Tactile keypad Complete with weather cover and paddlewheel unit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

  Kestrel Fire Weather Kestrel is proud to introduce the 2016 Fire Line which includes models such as: Kestrel DROP D3FW Fire Weather Monitor, Kestrel 3500FW Fire Weather Meter, Kestrel 5500FW Fire Weather Meter Pro and the Kestrel 5400FW Fire Weather Meter Pro WBGT with LiNK Compass and Vane Mount.     Specials   Closeouts    Remanufactured    Rebates

If you are looking for cockpit instruments that feature cutting edge technology yet are intuitively simple to operate, look no further. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Ease of use and display clarity were top of the design brief. All Clipper instruments have giant digits and multilevel backlighting. Technical Specifications: 40mm high digits Depth below transducer/below keel/below surface Deep and shallow alarms (audible and visual) User selectable feet or metres Intelligent gain control & manual override Selectable display rate and depth averaging rate Depth trend indicator High transmit power All settings stored in non-volatile memory Tactile keypad Complete with weather cover and transducer Consumption 20mA +25Ma for backlight (max)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

WeatherLink Console The WeatherLink Console places all the data from a Vantage Pro2 or Vantage Vue sensor suite weather station right at the user's fingertips. One device gives instantaneous access to the information needed and the ability to do deep analysis, all from a single, convenient display with an intuitive and easy-to-understand touchscreen. From viewing current and historical data, creating graphs, setting alarms, calculating indexes, and reviewing forecasts, the WeatherLink Console helps users keep track of conditions to make better decisions about recreation, gardening, home maintenance, and more. The brilliant HD touchscreen allows users to easily navigate and analyze hyper-local weather data or view the latest conditions anywhere in the room. The dynamic dashboard can be customized to show a glance up to 21 parameters, from temperature to wind to rain. Set hundreds of alarms to get notified when conditions that matter change, such as when temperatures begin approaching a critical point for outdoor work or when wind speeds reach a certain level. With a full database of historical data stored right on the console, the console offers easy access to graphs of the last 24 hours of data, last month, or previous year. The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool; no Wi-Fi is required. Or connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely. Use a free WeatherLink account to log in to all WeatherLink data-viewing products and access all the data on a phone or computer. Upgrade to Pro or Pro+ for more detailed analysis, charting, and mapping of data, or to share data with family, friends, the WeatherLink community, and beyond. Features: Easily navigate, view, and analyze data with the vibrant, HD color touchscreen Customize the dashboard to see at-a-glance inside and outside temperature and humidity, barometric pressure, wind speed and direction, rainfall, dewpoint, moon phase, highs and lows, and more Use the full database of historical records to create over 100 graphs for the last 24 hours, days, months, or years Set hundreds of alarms to warn of dangers such as high wind, freezing temperatures, high rain rate, heat index, and more Receive and display data from a local network—no Wi-Fi is required (or use Wi-Fi to join the WeatherLink community and upload and share data) Track detailed hourly and daily forecasts for the next 7 days when connected to the WeatherLink Cloud See data from up to 8 transmitting sensors or sensor suites in one location (choose from 80+ sensors to customize a personal weather network) View conditions and details for stations worldwide on the screen See the current conditions from the remote weather station on the console Protect against data loss during power outages with integrated lithium-ion battery Add a second console to the system to view data in multiple rooms Compatible with multiple smart home systems including Amazon Alexa Specifications: Console Size: 8.75" x 6" x 0.75" (210mm x 152mm x 19mm) Display Area: 6.75" x 4.25" (171mm x 107mm)

i50 SeaTalkng Instruments - Tridata with Thru-Hull Transducer The i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance, and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCDs, and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD, and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match our instruments and multifunction displays. For the ultimate in flexibility, the i50 Instruments support SeaTalkng CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed, and wind transducers directly to the respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of the i50 line is designed to complement our full line of a-Series, c-Series, and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument has a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately. i50 Instruments are designed to operate from 12V DC power and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry-leading 2-year warranty, upgradeable to 3 years at no charge by registering online within 90 days of purchase. i50 Tridata Instrument  The i50 Tridata is a convenient 3-line instrument that combines the Speed and Depth Instruments functions into one display. This makes the i50 Tridata ideal for installations on helms where space is a premium or as a depth and speed repeater solution for other locations on the boat. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Use a primary display or as a repeater of i50 depth and speed instruments Built-in depth and speed transducer connections M78713-PZ Nylon Depth Transducer with 45ft cable E70673 ST900/P120 S/T Thru Hull - 13.7m Cable The i50 Tridata's 3-line LCD can show current depth, current speed, distance log, trip log, and water temperature. Additional display modes include maximum speed, average speed, and VMG to windward. Tridats have a count-up timer and 2 race start timers for racers. Tridata's robust alarm functions include a shallow depth alarm, deep depth alarm, shallow anchor alarm, and deep anchor alarm. Features: Ultra-modern design complements Raymarine's latest a-Series, c-Series, and e-Series Multifunction display and instrument systems. Large, crisp LCDs with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70, and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy

  The Wind Instrument RB™ has no wires to run down the mast and through the cabin, because it is wireless and solar-powered. SailTimer made the first masthead anemometer that could transmit to smartphones and this new model has some amazing features. First, it works with lots of great chartplotter and performance apps (see the list here). For example, if you like to use wind angle while sailing, the MID Wifi app on iOS has a beautiful wind gauge that can show Apparent and True Wind Angle at the same time.       But what if you have NMEA wiring to a Multi-Function Display (MFD)? The Air Link™ accessory can receive the Bluetooth transmissions from the masthead, and has NMEA wiring connectors. The Air Link can also retransmit on wifi all NMEA wired data, to connect your wired devices to your smartphone/tablet. Aqua Map on Android just added the wifi connection to the Air Link this month.   The Wind Instrument RB™ has a Removable Battery in the nose cone, where it works as a counter-balance. The pointer is carbon fiber to reduce weight. The transmission range is 280 feet (85m) for boats of all sizes, whether you are launching a keelboat (above), trailerable sailboat (no 12v battery required), or multihull (below), even with a rotating mast.     Specials    Closeouts   Remanufactured    Rebates

    Customers who own an existing Garmin GXM antenna and purchase a new GXM 54 now until November 13th, 2019, are eligible to receive $150 via mail-in rebate when registering your rebate online at Garmin.rebateaccess.com.     Limit 1 rebate per customer. The product must be purchased in factory-new condition. All submissions must be postmarked by Dec. 13, 2019.     Qualifying existing GXM antennas include the following:     GXM 51 GXM 52 GXM 53     Offer valid now until November 14th, 2019.         The GXM 54 satellite weather/radio antenna with SiriusXM coverage lets you head out with detailed weather information that's delivered straight to your Garmin chartplotter. You'll gain added awareness and confidence on the water with the most current weather conditions and forecasts, including NEXRAD, lightning, wind and wave information. And you'll enjoy high-quality entertainment with more than 150 channels of SiriusXM satellite radio.         Plus, you can add Fish Mapping to find suggested potential hot spots for popular species — including mahi, marlin, swordfish, wahoo and yellowfin — based on sea conditions. Display sea surface temperature contours, surface temperature front strength and 30-meter subsurface temperature contours, and monitor plankton data such as concentration contours and plankton front strength.         GXM 54 is easy to install and use, and its reliable antenna provides the best possible reception — even on the fringes of SiriusXM coverage. It's fully compatible with GPSMAP® 8400/8600, GPSMAP 7400/7600, GPSMAP 7x2/9x2/12x2 Touch and GPSMAP 10x2/12x2 chartplotters and chartplotter/sonar combos.     Specials    Closeouts   Remanufactured    Rebates