|
Digital Cameras Still and Video
|
|
|
|
|
|
M232 Pan/Tilt 9Hz Marine Thermal Camera
The FLIR M232 marine thermal camera is the smallest and most affordable pan and tilt marine thermal night vision camera. Using the latest generation Boson(TM) thermal core, the M232 lets boaters see at night in 320 x 240 thermal resolution and also features 2x digital zoom. When the M232 is combined with a Raymarine Axiom MFD, FLIR’s ClearCruise™ intelligent thermal analytics technology offer boaters an entirely new level of awareness and safety. The M232 also uses IP video technology and simplifies installation by eliminating extra video signal cables. The M232 offers features 2X digital zoom capability.
Make Navigation Safer
The M232 improves navigation and safety by helping you see bridges, docks, buoys, and other vessels, night and day. The M232 also helps boaters find people in the water faster than using spotlights and radar alone.
Long-Range, Optimized Viewing
M232 features full 320x240 resolution for optimal horizon-to-horizon viewing, and 2X digital zoom for long-range performance.
Easy to Install on any Vessel
The combination of the M232’s small, lightweight design and IP video connectivity make it a snap to install and integrate with multiple MFDs.
Enhanced Awareness with ClearCruise™
Combine M232 with a Raymarine Axiom MFD and take advantage of ClearCruise™ intelligent thermal analytics. ClearCruise™ provides audible and visual alerts when “non-water” objects such as boats, obstacles, or navigation markers are identified in the scene.
Specifications:
Detector Type: 320 × 240 VOx Microbolometer
Video Refresh Rate: 9 Hz
Field of View: 24° × 18°
E-Zoom: 2x
Image Processing: FLIR Proprietary Digital Detail Enhancement
Thermal Resolution: 320 x 240 resolution for clear, detailed images
Ethernet-Enabled: For simple integration with your other electronics
Zoom: 2x e-Zoom for extended range performance
Pan & Tilt: M232 with adjustable pan and tilt
System Specifications:
Pan/Tilt Range Pan: 360deg (continuos), Tilt: +110°, -90°
Image Processing: FLIR Propriety Digital Detail Enhancement™
Video Output: H264 IP Video stream
Power Requirements: 12 or 24 VDC
Power Consumption: 15W (typical) 18W (max)
What’s In the Box:
Every M132 and M232 thermal camera includes:
Camera unit
Top down riser kit
Thermal camera base-seal
Right-angled RayNet to RayNet cable, 32 feet (10 meters)
RayNet to RJ45 adapter cable, 4-inches (100mm)
Right-angled 3-pin power cable, 32 feet (10 meters)
Stainless steel mounting hardware kit
*Notes: JCU3 joystick controller and IP to analog video decoder sold separately.
When the M132/232 cameras are set for either Ball Down or Mirror Image configurations, the Clear Cruise feature is unavailable. This is due to the nature of the algorithm that supports this function and its relationship to the orientation of the horizon. At this time, there is no scheduled date on which this will be remedied.
|
3844.50 |
|
|
High Res Analogue Mini Dome Camera - Composite Video Blanking and Sync & Transport Video Interface
Iris’s SX60 range of miniature marine-grade stainless steel cameras is available in multiple formats and delivers the highest quality video to suit your application.
The IRIS-S060 features a multi-format 4-in-1 camera module (CVBS, TVI, CVI, and AHD) designed for maximum compatibility with most marine chart plotters, digital recorders, and monitors.
The IRIS-S060 can be set to output analog video (CVBS), or a range of analog Hi-Def formats (HD-TVI, HD-CVI, and AHD), providing up to 1080P high-definition resolutions in real-time. When used with an IRIS HD switcher, HVR, or our TVI to HDMI converter, the IRIS-S060 can be connected to HD TVs and MFDs with digital inputs such as Garmin's 8000 series or Simrad's NSO series.
The S060’s 316 stainless steel housing provides the ultimate protection in the harsh marine environment. It is, therefore, the perfect solution for deck monitoring aboard workboats, fishing vessels, and passenger vessels, while fitting in equally well with the high-end aesthetic of luxury vessels and mega yachts.
Measuring only 58mm high by 60mm in diameter, the S060 is small enough to provide unobtrusive surveillance and also for use in areas where space is tight, such as engine rooms or anchor wells.
Whether you need a high-quality and rugged camera as part of your onboard surveillance system, for engine room, deck, and companionway monitoring, or as a robust and stylish docking or backup camera, our IRIS-SX60 range of cameras is the perfect solution.
Features:
3.6mm lens offering an 80-degree horizontal field of view
Marine-grade 316 stainless steel rugged corrosion-free case
4-in-1 video format camera module (CVBS / TVI / CVI / AHD)
high-polish finish
Analogue (CVBS / composite video) resolution 1000TVL
Set to TVI for 1080p HD resolution in real-time (no network latency).
Built-in infrared LED illumination (10m range)
Deficient power consumption
IP66 Environmental Protection
Applications:
Workboat & commercial shipping
Luxury motor yachts
Fishing & sports fishing
Ferry boats & passenger's vessels
Law enforcement & emergency services
Rapid deployment applications
Vehicle & transport applications
Specifications:
Lens (millimeter): 3.6mm
Horizontal Field of View: 80-degree HFOV
Sensor (inch): 1/3” Sony CCD Sensor
Resolution: 1000 TVL
Interface: NA
Video Processing: 1VPP CVBS Composite Video 75Ω
Protocols/Video Format: PAL / NTSC Selectable
Onvif: NA
Bitrate: NA
Illumination: 6 x 850nm infrared, 10-meter range
Lens/Field of View: 3.6mm standard (80-degree HFOV)
Mirroring: Horizontal & vertical configuration via the OSD menu
Automatic Gain Control: Supported / multiple levels
Compatibility: All MFDs with Composite Video Input, TV via AV Input
Operating Temperature: -30 +60-degrees C
Connections: Video: BNC 75Ω Female Connector / DC Power Socket
Material: 316 Stainless Steel
Power: 12VDC < 200mA Max
Weight & Dimensions: 0.420Kg / 59.5mm ø x 52.93mm H
Environmental: IP66
|
439.56 |
|
|
RAM 1" Diameter Ball with 1/4-20 Stud for Cameras, Video & Camcorders
The RAP-B-366U, universal camera and camcorder base, consists of a 1" diameter rubber ball, connected to a round plate with 1/4"-20 camera thread. The round plate provides extra support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Compatible Cameras:
Contour GPS
Contour HD
Gobandit GPS-HD
GoPro HD Helmet HERO
GoPro HD Motorsports HERO
GoPro HD Surf HERO
GoPro Helmet HERO Wide
GoPro Motorsports HERO
GoPro Motorsports HERO Wide
GoPro RC HERO
GoPro Surf Hero
GoPro Wide HERO
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.11 |
|
|
Track Ball™ Mount with 1/4"-20 Threaded Adapter for Action Cameras
The RAP-B-366-153-354-TRA1 consists of a Track Ball™ base, composite double socket arm, and a 1" ball connected to a round plate with 1/4"-20 camera thread. This steel camera thread will connect to any standard female thread found on camcorders, digital cameras and POV cameras. This kit is compatible with virtually any track system including the RAM Tough-Track™.
Features:
1. Unique rubber ball design dampens shock and vibration helping to extend the life of your camera
2. 1/4"-20 male threaded stud will connect to most female threads found on POV cameras
3. High strength materials ensure product longevity
4. Compatible with the RAM Tough-Track™
5. Double ball and socket mount offers infinite adjustment angles
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
Note:
Part number reflects product packaged in a poly bag.
|
26.12 |
|
|
RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 1/4"-20 Threaded Male Post for Cameras
The RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 1/4"-20 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
18.30 |
|
|
Tele-Mount™ Telescoping Camera Pole Kit - 1/4-20 Camera Threaded Adapter
Consists of a female hole base with 1" ball, double socket arm and 1" ball, connected to a round plate with 1/4"-20 camera thread. The female hole base will fit most common telescoping and extension poles. The male 1/4"-20 threaded steel stud will connect to any standard female thread found on camcorders, digital cameras and POV cameras.
Features:
Patented rubber ball design dampens shock and vibration helping to extend the life of your camera
1/4"-20 male threaded stud will connect to most female threads found on POV cameras
High strength materials ensure product longevity
Fits most common telescoping and extension poles
Great for achieving that perfect underwater fish shot
Double ball and socket mount offers infinite adjustment angles
Place pole in a kayak milk crate, rod holder or the RAP-119U
Lifetime warranty
Compatible Poles:</>B
Most generic telescoping poles with 0.715" OD Threads
Ettore 42004 4-Feet Reach Extension Pole
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
30.18 |
|
|
RAM 2.5" Round Base (AMPs Hole Pattern), 1.5" Ball & 3/8"-16 Threaded Male Post for Cameras
The RAM camera base contains a 1.5" rubber ball that is connected to a 2.5" diameter round base. Also, included is a 3/8"-16 threaded steel stud, centered, the round base provides support and stability for cameras that rest on top of it. The male 3/8"-16 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
19.96 |
|
|
4 Channel NVR Kit with 4 Outdoor IR 5MP IP Cameras 2.8mm Fixed Lens, 1TB Kit NDAA
Monitor your property with the 4-Channel 5MP NVR with 1TB HDD & 4 5MP Outdoor Network Turret Cameras from Speco Technologies. The 4-channel NVR manages and can record from up to 4 cameras. It comes preinstalled with a 1TB HDD. HDD capacity is expandable to 8TB if more storage space is required. H.265 and H.264 video compression reduces bandwidth requirements for efficient data storage while maintaining the best possible video quality. Remote viewing is possible via the Speco Gray Viewer for Windows & Mac PCs and the Speco Gray app for iOS & Android.
The included 5MP turret cameras have a 1/2.7" CMOS sensor to capture 2592 x 1944 resolution video. They have a 2.8mm fixed lens with IR LEDs that provide up to 100' of night vision. The cameras are IP66-rated for outdoor use.
Features:
Plug-and-play operation
HDMI and VGA video output
RCA audio output
4K UHD monitor output
Gigabit Ethernet port
Two USB 2.0 ports
Built-in S.M.A.R.T technology (self-monitoring, analysis, and reporting technology for HDD)
Daylight saving time
Free US-based DDNS service
Compatible with Windows 7 or above, Mac OS X 10.9 or above, iOS, Android, Internet Explorer 8-11, and Safari 5.1 or above
|
633.00 |
|
|
Mini Flush Mount Hi-Resolution Through-Hull Camera - CVBS, TVI, CVI, & AHD
Introducing the world's smallest through hull camera, the IRIS735 machined from corrosion-resistant marine-grade 316L stainless steel and measuring only 28 mm by 59mm long.
The 735 has been designed to sit flush into the hull, superstructure, or transom of your vessel to provide all-around coverage without impacting the tines of your vessel, with a bezel height of only 8.5mm.
The camera module itself features a Sony Starlight sensor to provide excellent performance in low light and can be user-set to output composite (CVBS) or analog Hi-Def (TVI, CVI, AHD) video formats. When set to CVBS, the 735 is compatible with all chart plotter models that support composite video inputs. When set to TVI, the 735 will provide high-definition real-time video, which can be viewed on MFDs via our CMAC systems or fed to a TV via our IRIS995 TVI/HDMI convertor.
The camera has a 140-degree wide-angle field of view, which makes it great to position along the sides and transom of your vessel to provide all-around coverage whilst docking and is also a great solution for sports fishing applications.
If you are looking for a tiny, cost-effective docking camera, a sports fishing camera, or an unobtrusive camera to add to your onboard security setup, the IRIS735 is the perfect solution.
The IRIS735 is also a perfect choice for robust and reliable semi-covert cameras for emergency response and law enforcement vehicles.
Features:
Micro-Compact Form Factor 28MM X 36MM (8MM From Panel)
316L Marine Grade, Corrosion-Proof Stainless Steel Body
4-In-1 Video Format (User Selectable) – CVBS, TVI, CVI, AHD
2.9MM Wide-Angle Lens
Starlight Sensor for Superb Low Light Operation
Compatible With All Chart Plotters Supporting Composite or Analog Video
Compatible With CMAC and CMAC HVR Systems
Set to TVI for HD TV Viewing with the IRIS995 Converter
IP67 Environmental Rating
Extremely Low Power Consumption
Applications:
Perfect for extreme environments
Road traffic surveillance
Monitoring dynamic digital signage
Engine room monitoring
Deck monitoring
Fishing vessel monitoring & surveillance
Emergency vehicle camera applications
Animal / Food processing applications
Specifications:
Lens (millimeter): 2.9mm
Horizontal Field of View: 140-degree HFOV
Sensor (inch): 1/2.8” SONY STARVIS CMOS Sensor
Resolution: CVBS: 1920 x 1080P @ 30fps (NTSC) / 25fps (PAL) / 906H in CVBS mode
Minimum Resolution: 0.001 Lux (F-1.2)
Day & Night Operation: Auto / Colour / Monochrome / External
Video Output Modes: Analogue HD Modes: HD-TVI, HD-CVI, AHD / Analogue: Composite Video (CVBS) NTSC / PAL
Lens/Field of View: 2.9mm Standard (140-degree HFOV)
Shutter Speed: Auto / Manual (1/50(60) - 1/50,000 sec)
Defog: Off / Auto
White Balance: ATW / AWC / INDOOR / OUTDOOR / MANUAL / AWB
Back Light Compensation: OFF / BLC / HSBLC
D-WDR: Off / 08
SENS-UP: Off / x2 x30
DNR: Off / Low / Middle / High
Brightness: 0 - 100
Motion Detection: Off / On
Image Mirror: Off / Mirror / V-Flip / Rotate
Sharpness: 0 10 Steps
Material: 316L Marine Grade, Corrosion Resistant Stainless Steel
Power: DC12V +/-10% / 125mA (1.5W)
Weight: 0.1Kg
Dimensions: 28mm-diameter x 58mm
Environmental / EMC: EN60529 IP67 / EMC EN60945 (TBC)
Operating Temperature: -10-degrees C + 50-degrees C / <90% Humidity
|
374.46 |
|
|
Miniature Marine PTZ Dome Camera - Stainless Bezel - Hi-Def Ethernet IP - 10x Digital Zoom - 4 in 1 Video Format
The IRISx106 range of multi-format miniature, controllable cameras are the smallest marine PTZ cameras available on the market and provide fast, smooth variable speed control in a variety of formats to suit your requirements.
The IRIS106 features a high-resolution camera sensor that can be switched to output analog (CVBS), AHD, HD-TVI, and HD-CVI video formats depending on your requirement. In analog mode (default) the camera will connect directly to all MFDs that feature a composite video input to provide a crisp, clear video image. Set the camera to HD-TVI and connect via one of our Hybrid recorders or TVIHDMI encoders and you will achieve 1080P High Definition video in real-time compatible with MFDs that feature digital (HDMI / DVI) inputs.
The camera can be controlled by our IRIS595 joystick controller, TE01 rotary controller, or via an Iris HVR interface. Data communication to the camera is achieved via a two-wire RS485 serial data connection.
The camera housing is designed to be as small as possible, simplifying installation and fitting in discreetly with the boat's aesthetic, unlike other large, unsightly marine PTZ cameras. The body of the camera is made from lightweight but tough ABS plastic, and the dome is cast from smoke acrylic. The camera housing is finished off with a marine-grade stainless steel bezel available in high polish (standard). A surface mount bracket is also available for the camera (Part Number: BRK106), facilitating installation directly onto a bulkhead. This is often used when installing in engine rooms where it is not possible to recess mount the device.
Because of its small size and sleek design, the IRIS4106 can be used for deck, companionway, and tender monitoring, engine room monitoring, and as part of your onboard surveillance system. In summary, the 4106 is a very versatile, robust, and controllable marine PTZ camera.
Features:
Marine Grade 316 Stainless Case
The smallest PTZ dome available (86 mm)
IP
Huge compatibility
Easy installation & low power
Stylish high-polished finish
Fast, responsive pan, tilt, and zoom operation
Specifications:
Lens (millimeter): F1.8 / F=4.9mm 49mm
Image Sensor (inch): 1/4” Omnivision OV9712
Image Processing: H.264 Video Codec, Dual Stream 1-30fps adjustable
Effective Pixels: 921,600
Resolution: 1080P/720P
Min Illumination: 0.1 Lux (Colour) / 0.01 Lux (B/W)
Illumination: NA
IR Distance: 10m
Day / Night: Auto / Day / Night
S/N Ratio: >50dB
Optical Zoom: 10x
Digital Zoom: 10x
Wide Dynamic Range: Supported
BLC: Supported
3D DNR: Supported
Mirroring: Horizontal Flip / Vertical Flip
AGC: 0-32
Pan Details: 360-degree Continuous Rotation / Speed 0.5300-degree sec
Tilt Details: 0 90-degree / Speed 0.5300-degree sec
Network: Ethernet RJ45 (10/100 Base-T)
Protocol: TCP/UDP/HTTP/MULTICAST/UPnP/NTP/ RTSP/ONVIF-S 2.4
Power over Ethernet: Supported
P2P: Supported
Smart Phone: Android / iOS
Compatibility: PC-Based Systems. For the latest MFD compatibility please contact IRIS
Max Users: 32 Users
Power: +12VDC / PoE IEEE802.3aF
Power Consumption: 1A Max
Operating Temperature: -35-degrees C + 60-degrees C
Dimensions (millimeter): Bezel OD = 154mm, Panel Cutout = 122mm, Depth Behind Panel = 58mm (For IRIS4106 model additional space should be allowed for RJ45 Connector), Draft = 73mm
Ingress Protection: IP66
Weight: 1.1Kg
Material: 316L Stainless Steel Bezel, Polycarbonate Dome, ABS Plastic Housing
|
1422.00 |
|
|
Hybrid Camera Recorder with IrisControl for Garmin OneHelm Host - 1TB HDD - 8 Analogue & 4 IP Camera Inputs
You’re in Control…
CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms. Upload your deck plans, set up your onboard cameras and alarms, and control everything from your chartplotter with the Iris Control App.
Multiple Camera Formats
Hybrid models accept analogue, AHD (HD-TVI / HD-CVI), and IP formats. By supporting multiple formats, not only does CMAC offer maximum compatibility, but it also future-proofs your system should you decide to upgrade your cameras.
High-Definition Digital Output
CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter.
IRIS Control HTML5 App
Manage and control your onboard cameras and alarms via the Iris Control HTML5 app. Upload your deck plans and photos, drag and drop the dedicated camera and alarm icons, and you now have the most feature-rich and intuitive marine security and surveillance system in the world. Navigate through your deck plans and select camera icons to switch video inputs, control PTZ cameras via the ultra-responsive virtual joystick, configure and select camera tours and scans, activate thermal color palettes, gyro control, and much, much, more! Iris Control frees up helm space by removing the need for additional control hardware and joysticks.
USB Touch Control
In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy.
WiFi / Remote P2P Connectivity
Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access.
Integrated Network Video Recorder
CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more.
Features:
1 terabyte hard disc drive
This hybrid version can connect 4 IP cameras and 8 analog cameras
Wired for a Garmin unit
Fully integrated camera and alarm control & management system for boats
Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control
Garmin onehelm™ integration with the IrisControlTM app
Control and switch your cameras from your Garmin MFD.
Configure your boat alarm system, control individual and group alarms
Razor-sharp, scaled control via IrisControl’s virtual joystick
Full-screen touch control with Garmin’s USB touch (on available models)
Firmware is upgradable to unlock features as & when they become available
|
1423.80 |
|
|
IP Camera Recorder with IrisControl for Garmin OneHelm Host - 1TB HDD - 32 IP Camera Inputs
You’re in Control…
CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms. Upload your deck plans, set up your onboard cameras and alarms, and control everything from your chartplotter with the Iris Control App.
High-Definition Digital Output
CMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter.
IRIS Control HTML5 App
Manage and control your onboard cameras and alarms via the Iris Control HTML5 app. Upload your deck plans and photos, drag and drop the dedicated camera and alarm icons, and you now have the most feature-rich and intuitive marine security and surveillance system in the world. Navigate through your deck plans and select camera icons to switch video inputs, control PTZ cameras via the ultra-responsive virtual joystick, configure and select camera tours and scans, activate thermal color palettes, gyro control, and much, much, more! Iris Control frees up helm space by removing the need for additional control hardware and joysticks.
USB Touch Control
In addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy.
WiFi / Remote P2P Connectivity
Connect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access.
Integrated Network Video Recorder
CMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more.
Features:
1 terabyte hard disc drive
This is an IP camera only version that can connect up to 32 cameras
Wired for a Garmin unit
Fully integrated camera and alarm control & management system for boats
Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control
Garmin onehelm™ integration with the IrisControlTM app
Control and switch your cameras from your Garmin MFD.
Configure your boat alarm system, control individual and group alarms
Razor-sharp, scaled control via IrisControl’s virtual joystick
Full-screen touch control with Garmin’s USB touch (on available models)
Firmware is upgradable to unlock features as & when they become available
|
1417.26 |
|
|
RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base, Short Double Socket Arm & Round Base Adapter that Contains a 1/4"-20 Thread for Cameras
Part #: RAM-B-149ZA-C1U
The RAM zinc coated u-bolt rail base consists of the 1" diameter ball and socket system with RAM Universal 1/4"-20 thread centered on a 2.5" diameter plate. This mount is designed to be a universal mounting solution for both still and moving cameras. The base has a 1.0" diameter rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt and nuts included will fit a circular rail with diameter from 0.5" to 1.25". To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black composite covers over the exposed ends of the u-bolt.
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball "B" Size
Note:
The "U" in the part number reflects product packaged in poly bag. The male 1/4" long, 1/4"-20 thread in the middle of the 2.5" diameter plate will connect to the standard female thread found at the bottom of most still and video cameras.
|
36.77 |
|