|
AISLink Man Overboard Beacon Parts Kit
Replacement parts kit.
Compatible With:
AISLink Man Overboard Beacon
In the Box:
Mounting bracket
Activation tape
Antenna rewind tool
Programming adapter
Tether
Life-jacket fixing buckle
Fixing buckle patch
Reflective strip x 2
*Sold as an Individual
|
95.47 |
|
|
2886 AISLink Man Overboard Beacon
Overboard situations can be a little less hair-raising with the Automatic Identification System (AIS) Man Overboard Beacon (MOB). The AISLink features integrated Digital Selective Calling (DSC) and GPS technology, so you can quickly reach out for help when you need it most. Unlike a personal locator beacon, which signals orbiting search and rescue satellites, AISLink sends an alert message within seconds to all local vessels with an AIS receiver and/or AIS-enabled plotter. Plus, the DSC alarm on your vessel’s VHF radio can also be signaled to make first responders aware of what’s going on.
Seconds count in a man overboard situation. The AISLink MOB automatically activates upon inflation of the lifejacket, sending an initial alert within 15 seconds to all AIS receivers and plotters in the vicinity. Both positioning and MOB emergency messages are transmitted alerting vessels up to 5 miles away of your emergency situation.
Powerful lithium metal batteries provide 24+ hours of operational life, and the high-impact housing can withstand a drop to water of 20m.
Compatibility:
Note that most modern AIS plotters and DSC VHF units comply with the standards for receiving MOB transmissions. However, it is recommended that you check with your equipment manufacturer to ensure compatibility. DSC functionality may vary - or be disabled entirely - according to the regulations of individual countries.
Programming:
Easy to complete initial programing via downloadable programming software or web based platform. Links available on instruction manual.
Features:
Dual alert via AIS and DSC Personal Locator
Onboard GPS for exceptional location accuracy
Simple life jacket integration
Manual or Automatic Activation
24+ hours of operational life and 7 Year battery life
Ultra-bright LED strobe light
End user replaceable battery
Technical Specifications:
Activation Method - Manual or Water Activated
Battery Life -7 year from date of manufacture or after emergency use (24+ hours operational battery life)
Range - 5 Miles (dependent on conditions)
Waterproof - 10 M
Dimensions - 4.52" x 1.81" x 1.06" (11.5 x 4.6 x 2.7 cm)
Weight - .2 lb (92g)
GPS enabled - Yes
Strobe - LED Strobe light
Frequency - AIS Channel 1 - 161.975 MHz and AIS Channel 2 - 162.025 MHz and DSC 156.525 MHz
Transmit Power - AIS - 1 Watt and DSC - 0.5 Watt
AIS Messages - Message 1 (Position), Message 14 (MOB Status)
AIS Repetition Interval - 8 messages/minute (message 14 sent twice every 4 minutes)
DSC Messages - Individual Distress Relay (single call made on the press of the activation button, in regions where it is allowed)
DSC Repetition Interval - Once every 5 minutes (Relay only)
In the Box:
AISLink Man Overboard Beacon
Mounting bracket
Activation tape
Antenna rewind tool
Programming adapter
Tether
Life-jacket fixing buckle
Fixing buckle patch
Reflective strip x 2
Instruction Manual
*Sold as an Individual
WARNING: This product can expose you to chemicals including LITHIUM which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
395.94 |
|
|
AISLink MOB Beacon Replacement
Replacement battery for AISLink Man Overboard Beacon. End user replaceable.
Technical Specifications:
Battery - Lithium 6V
Battery Life - 7 Years
In the Box:
Battery
Date label
Hardware
*Sold as an Individual
WARNING: This product can expose you to chemicals including LITHIUM which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
92.94 |
|
|
|
|
|
MOBi Man Overboard Indicator
The MOBi is a state of the art, fail-safe transponder man overboard system. It consists of a base unit and up to eight active transponders for crew or valuable equipment. In operation the base station sequentially interrogates each transponder which then broadcasts its presence. In the event of a crew member falling overboard the drop in signal level is detected by the base unit which sounds a high intensity audible alarm. To aid identification of the missing crew member the base station continually displays the names of all the crew currently logged on, the signal levels of their transponder fob and their current status. Three AAA cells power each transponder for several weeks of continuous use. Should the base station be turned off the transponders will go to sleep with a life of several years.
Technical Specifications:
Failsafe transponder technology
Pin code identified
High contrast display with white backlight
Current consumption 50mA at 12V + 50mA for backlight
Complete with 3 MOBi fobs
Waterproof fob uses standard AAA type batteries
Compact display size: 150 x 112 x 42mm
Fob weight:100 grams
Fob dimensions 77 x 47 x 38mm max with belt clip This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
412.43 |
|
|
Electronic SOS Beacon Locator Kit
Beacon complies with all US Coast Guard requirements for "Night Vision Distress Signals" as found in the Code of Federal Regulations: 46 CFR 161.013.
Flag complies with US Coast Guard Requirements in 33 CFR 175.130 for Daytime Signaling.
Features:
Flashes bright SOS distress signal in Morse Code
Duration: Flashes 2x longer than USCG continuous run-time requirement
Brightness: Maintains constant light intensity 2.5x longer than USCG requirement
Light source extends 4" above waterline increasing visibility
Waterproof easy and intuitive On/Off switch
SOLAS Grade reflective tape at waterline
Double O-ring closure
Multiple deployment options - floatable, handheld and hanging
Low battery indicator function - when turned on unit will quick flash for 5 seconds if batteries need replaced
Requires 2 D-cell batteries (not included)
Encapsulated micro processor electronics
High impact, high visibility orange ABS plastic unibody construction
Independently tested by US Coast Guard Approved Lab
Packed in a reusable storage container
USCG Approved orange distress flag (included)
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
102.00 |
|
|
Cotter, Ring & Clevis Pin Parts Kit
Kit Contents:
(30) Clevis Pin Dia. 3/16", Grip 9/32"
(30) Clevis Pin Dia. 3/16", Grip 13/32"
(10) Clevis Pin Dia. 3/16", Grip 17/32"
(6) Clevis Pin Dia. 1/4", Grip 13/32"
(30) Clevis Pin Dia. 1/4", Grip 1/2"
(6) Clevis Pin Dia. 5/16", Grip 9/16"
(6) Clevis Pin Dia. 5/16", Grip 11/16"
(2) Clevis Pin Dia. 3/8", Grip 5/8"
(6) Clevis Pin Dia. 3/8", Grip 13/16"
(2) Clevis Pin Dia. 7/16", Grip 7/8"
(1) Clevis Pin Dia. 1/2", Grip 3/4"
(2) Clevis Pin Dia. 1/2", Grip 1"
(50) Circular Pins, 3/16" & 1/4"
(10) Safety Pins, 3/16" & 1/4"
(100) Cotter Pin, 1/16" x 1/2"
(50) Cotter Pin, 3/32" x 3/4"
(25) Cotter Pin, 1/8" x 1"
(10) Cotter Pin, 5/32" x 1-1/4"
|
376.75 |
|
|
Myers Pumps 25208A001 Parts Kit
Myers 25208A001 PK50 Parts Kit for 1/2 HP. For Models: HT, HR, HJ and QD Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
242.97 |
|
|
Myers Pumps 25208A002 Parts Kit
Myers 25208A002 PK75 Parts Kit for 3/4 HP. Models HT and HJ Jet Pumps.
Parts kit contains: Shaft seal, impeller, diffuser, gasket, O-ring, venturi and nozzle necessary to overhaul either shallow or deep well jet pumps.
|
291.20 |
|
|
SUPRAX Parts Kit - 12-Bolts, 3 Sizes of Inserts, 2-Allen Wrenches
Replacement parts to repair SUPRAX. All the parts needed to mount SUPRAX. Mounting bolts and a full set of inserts. Includes allan wrench tool.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
25.63 |
|
|
Winch Spare Parts Kit - Size 6 to 40
Service your Lewmar winch with all the parts you need in this one it.
Compatible With:
Ocean Standard winches - size 6 to 40
Ocean 14CST and 16CST (self-tailing)
EVO 15ST
*Sold as an Individual
|
50.63 |
|
|
Winch Spare Parts Kit - Size 50 to 60
Service your Lewmar winch with all the parts you need in this one it.
Compatible With:
Ocean Standard winches - size 50 to 60
Ocean 50CST and 60CST (self-tailing)
EVO 50ST - 65ST
*Sold as an Individual
|
40.75 |
|
|
Winch Spare Parts Kit - Size 66 to 70
Service your Lewmar winch with all the parts you need in this one kit.
Compatible With:
Ocean Standard winches - size 66 to 70
*Sold as an Individual
|
98.22 |
|
|
Winch Spare Parts Kit - Ocean 30 - 48ST/EVO 30 - 50ST
Service your Lewmar winch with all the parts you need in this one kit.
Compatible With:
Ocean Standard winches - size 30 to 48
EVO ST/SPT 30 to 50
*Sold as an Individual
|
40.75 |
|
|
Premium Spare Parts Kit for Kohler
This spare parts kit is for Engine Reference Kohler 4-6 Cylinder Diesel, 4-6,5 kW Gas, and 12,5 kW Gas.
|
128.48 |
|