|
3-Position On/Off/Momentary Marine LED Lighting Switch
On / Off / Momentary Marine LED Lighting Switch for two-color and multi-color lighting – simply toggle power to set color choice. For use with fishing boats, pontoon boats, sports boats, and yachts.
Features:
Power On/Off
Color change
Multiple fade mode changes
Specifications:
Off/On/Momentary
LED Voltage Rating: 12V (Add 600ohm resistor between pin 7 and ground for 24V operation)
LED Color: Blue x 2
Terminals: Brass or copper/silver plate 1/4” (6.3mm) quick connect
Sealing IP66/68, for above-panel components of actual switch only
Operating Temp. -40°C to +85°C
Contact Rating: 20 amps, 4-14VDC and 15 amps, 15-28VDC
Switch and actuator color: Black
Note: Use with SCM-SNLC single-zone lighting controller to access full ShadowNET® lighting control functionality.
|
34.79 |
|
|
D-SS Driving, Spot & Flood LED Lights
One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.
The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.
The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.
Ignite Surface Mount Diffused, Flood & Spot LED Lights
The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.
The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.
*Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.
Specials Closeouts Remanufactured Rebates
|
|
|
Pushing the boundaries of what is possible on the water even further — the new Signature Series 3 Wake Tower speakers deliver stunning Fusion signature performance optimized for wake boat applications. Now with premium CRGBW LED lighting, they bring you an unparalleled on-water audio entertainment experience.
The Signature Series 3 Wake Tower speakers feature industry-first CRGBW LED lighting. With Cool White and Warm White LEDs in addition to standard RGB - you can create a wider range of color blends from premium pastels to vibrant hues with 3 times the industry standard.
Specials Closeouts Remanufactured Rebates
|
|
|
Color Caster Extended Multi-Color Underwater Light - 10' Lead Wire
The SCM-10-EXT-CC extended color underwater light provides your vessel with 42 watts of intense LED lighting. Easily switch between 12 standard colors or use an or use a Shadow-NET® enabled product to enjoy unlimited colors. The SCM-10-EXT-CC’s low profi le design allows for many mounting locations. The unique stainless steel housing compliments the look of any trailer or lift kept boat.
Features:
Proprietary clear-gel-fi lled design, injected through entire unit —eliminates condensation and/or water intrusion under stress
Tough, polycarbonate lens
Passivated stainless steel 316 material provides a durable corrosion resistant housing
Transient surge and reverse polarity protection — dramatically prolongs unit life
Thermal throttling technology —enables safe operation even out of water
From simple on-off to full-feature lighting effects, unit is enabled for a host of control interfaces
Select between 12 colors when using a switch or unlimited colors when using Shadow-NET® enabled products
Specifications:
Up to 3,750 lumens
120 degree beam angle
42 watts power draw
3.5 amps operating current draw @ 12 volts
10-30 volts input
10” (254 mm) x 2.4” (61mm) x 0.5” (13mm)
IP68 fully submersible waterproof design
10 RGBW LEDs
Includes:
Lighting unit
10’ (6 m) submersible-grade cable
2 SS316 1” #8 PH screws
Standard 2 year warranty
|
838.80 |
|
|
keywords: Golight, golight led lights, led lighting, led spotlight, led searchlight
|
|
|
SCM-SL Series Flush Mount Spreader Light - White Housing - White
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
206.40 |
|
|
SCM-SL Series Flush Mount Spreader Light - White Housing - White/Blue/Red
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
226.80 |
|
|
SCM-SL Series Flush Mount Spreader Light - White Housing- Full-Color
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
238.80 |
|
|
SCM-SL Series Bracket Mount Spreader Light - White Housing - White
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
232.80 |
|
|
SCM-SL Series Bracket Mount Spreader Light - White Housing - White/Blue/Red
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
249.60 |
|
|
SCM-SL Series Bracket Mount Spreader Light - White Housing - Full-Color
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
261.60 |
|
|
SCM-SL Series Bracket Mount Spreader Light - Black Housing - Full-Color
The Shadow-Caster Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The flush mount version is great for mounting in T-Tops or use the bracket mount version to retrofit existing installations. The Shadow-Caster Spreader Light has a unique reflector design that spreads the light beams out to reduce glare. The Spreader Light comes in a black or white finish. It is available in 3 color output options: single color white, 2 colors (white and blue) as well as a full-color version. The brightness and color can be controlled with a standard switch.
Features:
Soft start technology ramps the brightness up gently over 2 seconds.
Power toggle feature to set brightness and change color
True white LED for best color performance
High-efficiency switch mode power supply
Waterproof low-profile aluminum housing
White or black finish
Unique reflector design to reduce glare
Specifications:
1500 lumen output
60-degree beam angle
16-watt power draw
10-30 volts Input
1.4A at 12 volts, 0.7A at 24 volts
6200 Kelvin cool white color temperature
5” (127mm) overall width x 1.5”(38mm) height x 1.3” (33mm) mounting depth.
IP67 waterproof design
Durable glass lens
The full-color version includes Shadow-NET® interface for controlling color
Includes:
Spreader light
Mounting screws and (2 screws) #4 X 0.5” SS3160H screws with flush mount version
Quick start guide
Standard 2 year warranty
|
261.60 |
|
|
Push-Button Switch - 12V Momentary (On)/Off - Red LED
Push-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.
Features:
Maximum switch current rating 5 Amps
IP67 environmental protection switches
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.99 |
|
|
Push-Button Switch - 12V Momentary (On)/Off - Blue LED
Push-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.
Features:
Maximum switch current rating 5 Amps
IP67 environmental protection switches
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.99 |
|
|
Push Button Switch - 24V Momentary (On)/Off - Blue LED
Push-button Switches are built to last with their stainless steel components and silver alloy contacts. The through panel mount switches are ideal for lighting, switch, or dash panels, with colored rings that can be wired to either display power to the system or switch back lighting. The product line includes both switches and warning buzzers with LED light rings.
Features:
Maximum switch current rating 5 Amps
IP67 environmental protection switches
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
29.99 |
|