Blackout LED Cube Light - Flush Mount - 3" SPECS Input Voltage- 10-30V DC Wattage- 12W (4-3W CREE LED) Raw Lumens- 960 LUX at 10M- 17 Color Temperature- 6000K Beam Pattern- 90 degree Flood CONSTRUCTION Housing Material- Die-cast Aluminum Housing Housing Color- Black Lens Material- PC Mounting Bracket- Flush Mount Electronics- Integrated-Epoxy Encapsulated Hardware- Stainless 316 and includes a gasket and cut out template OPERATION Operating Temperature- -40 degree C to +60 degree C Current Consumption- .9 amps @ 13.8 volts IP Rating- IP68 Protections- Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light - Flood - 3" - 2 Pack Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Lumens: 960 Lux @ 10M: 32 Raw Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light - Flood - 3" Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Lumens: 960 Lux @ 10M: 32 Raw Color Temperature: 6000K Beam Pattern: 90° Flood CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Cube Light w/Harness - Spot Beam- 3" - 2 Pack Focus your field of view with the narrow but powerful 8 degree spot beam LED cube light. These 3 Inch 4 LED cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs for plenty of light. Replaceable color accent caps are included to customize the housing. Constructed of die-cast aluminum housing and a virtually unbreakable polycarbonate lens, these cube lights are IP68 rated and can withstand the worst environments. It can get hit, shaken, banged up and wet - without fear of failure. SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W OSRAM LEDs) Raw Lumens: 960 Each LUX @ 10M: 380 Color Temperature: 6000K Beam Pattern: 8° Spot CONSTRUCTION Housing Material: Die-Cast Aluminum Housing Housing Color: Dark Gray Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: 40°C to +60°C Current Consumption: .7 Amps @ 13.8 Volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Cube Light - Flood Beam - 3" - 2 Pack Heise HE-DLWH1 Dual Light Wiring Harness Included Advanced thermal management- short circuit and open circuit protection and many other innovative features. Surface mount and flush mount LED cubes give you tons of options for every application you need. SPECS Input Voltage: 10-30V DC Power Consumption: 12W Each Pair (4-3W CREE LED) Lumen Flux: 900lm Each Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Hardware: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

6 LED Cube Light - Flood Beam - 3" Advanced thermal management- short circuit and open circuit protection and many other innovative features Surface mount and flush mount LED cubes give you tons of options for every application you need SPECS Input Voltage: 10-30V DC Power Consumption: 18W (6-3W CREE LED) Lumen Flux: 1440lm Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Hardware: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4 LED Marine Cube Light - Flush Mount - 3" SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W CREE LEDs) Raw Lumens: 960 Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: White Coating with UV Inhibitors Lens Material: PC Mounting Bracket: Flush Mount Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 and includes a gasket and cut out template OPERATION Operating Temperature: -40degC to +60degC Current Consumption: .9 amps at 13.8 volts per cube IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3" 4 LED Cube Light - 2-Pack Specifications: Wattage: 13W Lumens: 1080 Lux @ 10M: 411 Color Temperature: 6000K Beam Pattern: Spot (8°) Construction: Housing Material: Die-Cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 Operation: Operating Temperature: -40°C to +60°C Current Consumption @ 13.8V: 0.9 A IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3" 4 LED Cube Light Specifications: Wattage: 13W Lumens: 1080 Lux @ 10M: 411 Color Temperature: 6000K Beam Pattern: Spot (8°) Construction: Housing Material: Die-Cast Aluminum Housing Housing Color: Black Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated–Epoxy Encapsulated Hardware: Stainless 316 Operation: Operating Temperature: -40°C to +60°C Current Consumption @ 13.8V: 0.9 A IP Rating: IP67 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

4-LED Deck Light - Flat Mount - White Housing Unique, low profile LED multi-purpose deck light designed for flat mount. Ideal for hard tops, consoles, interior cabin, under gunnel. Features: USCG, ISO and SAE certified for Ignition Protection* 10.0 Watt equivalent to a 55 Watt halogen flood light Powerful 700 lumen output with 100° spread beam angle 12-24 volt applications Very low power consumption (0.9 amps @ 12V, 0.5 amps @ 24V) 8' hidden power cable Available mounting options: Stainless Steel Swivel Bracket or 3M adhesive tape Compact design bolts directly to any flat surface 5" long and 1-3/8" width Material Characteristics White or Black UV-resistant Polycarbonate housing Durable and self-extinguishing clear plastic lense Anodized Aluminum heatsink LED chips are silicone potted for IP67 Waterproof (non-submersible) *Completely sealed lights have been tested in an explosive environment and exposed to an explosive atmosphere in high temperature that includes powering on-off 50 times without igniting the atmosphere at a temperature not exceeding 200° C. These certificates demonstrate the ability to consistently provide product that meets statutory and regulatory requirements that assure customer satisfaction and safety. Ideal for use in engine rooms, battery compartments and anywhere fire safety is of most importance.

Many boaters find exploring underwater an adventure into a whole new world. Whether you are on a night dive or set to explore murky waters, choose the best lighting for safety. For a night dive, consider the number of lumens and the angle of a dive light. In an article by www.scubadiving.com,any light with an average beam angle between 12 degrees to 75 degrees and a lumen output of 200 or greater should work fine for any recreational diving. The beam should be far wider than most torches can produce to prevent a bright spot from appearing. A 90-degree beam should be sufficient for most wide-angle video cameras.   For many safety reasons, having lights underwater on a boat is a must. The lights cast a glow with a lantern-type beam to make your location more visible. Many captains mount lights under the swim step to improve safety when stepping on or off a boat.   Nighttime fishing has become extremely popular. An easy and effective way to attract fish at night is with appropriate lighting. The fish are not attracted to the light itself — they are attracted to the zooplankton that gathers around it.   Color matters when it comes to underwater lighting. The most effective colors are Green light and White light to attract fish to boats, docks, and piers. These colors are brighter and will attract fish from a greater distance. Blue light is less bright and is typically used more for ambient lighting.    In a future article, we will cover deck lights. For safety regarding boating at night, an on-deck spotlight is an essential piece of equipment. Many skippers have been saved from an impending disaster because their searchlight beam lit up an unlit dock, break-wall, or buoy. The spotlight also helps you spot a person or object that has fallen into the water. It can aid in safety when needed to signal other boats.   When shopping for a spotlight, decide if you want one permanently installed or a handheld that can charge from a cigarette lighter receptacle. You can also purchase a battery-operated handheld light.   Golight Stryker Searchlight 12V w/Wired Dash Control w/20' Wire Harness – White One of the preferred searchlights among skippers is the Golight Stryker Searchlight. It comes with a 20' wire harness and has a wireless dash-mount remote option. For broad sweeps with the beam, the searchlight has a 370x Rotation x 135-degree Tilt, with 200,000 Candela Beam Intensity. It is both UV Ray and Saltwater Resistant.   ACR RCL-300 Remote Controlled Searchlight - 12V/24V The top-of-the-line ACR RCL-300 Remote Controlled Searchlight – 12V/24V has feature upon feature with its versatility and ease with touch control. It includes fingertip remote control Point Pad™; up to three remote Point Pad™ units may be installed on the system; surface/flush mount options included. The exclusive XRCiZ™ feature rotates and moves the light assembly every 30 days from activation to keep all bearing surfaces free of corrosion and all electrical contacts functional.   Underwater Lighting Among the more popular LED hull-mounted lights is the OceanLED 2010XFM Pro Series HD Gen2 LED Underwater Lighting - Midnight Blue. XFM models, or Xchangeable Flush Mounts, are exchangeable without hauling should service be needed. The light can be retrofitted into most existing underwater lighting hole cut-outs, yielding immediate benefits of no startup power surge, low heat, minimal maintenance, and improved light output. It offers 7,000-fixture lumen brightness with the 2010XFM HD Gen2 model.   For additional information and pricing on the lighting listed here, go to https://www.clrmarine.com/462m4/lighting.html.     Fair Winds, Smooth Sailing. ____________________________________________________________________________________________________ To obtain more information about the products and services mentioned in this article, please contact CLR Marine https://www.clrmarine.com/.     Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com  

Safety First when it comes to Trailer Lighting   Safety is important, not only on the water, but on the road going to and coming from the water. If your trailer is more than a few years old, most likely you have had or are having some issues with the lights and the electrical system on your trailer. Fortunately, most issues are pretty easy to fix.   The first thing to do is to test the lights by hooking up to the vehicle harness and checking all lights to make sure they are bright and working. If any are dim or not functioning, connect a tester to the vehicle harness to see if there might be an issue with the electrical source. Cleaning the connectors of the harness on both the vehicle and trailer side is critical, and can easily be done with a can of electrical connector spray and a fine wire brush. Also, clean the ground contact and tighten the ground wire.   Make sure to check the ground screw and replace it if it is corroded. Most bulbs are easily replaceable by simply twisting them to remove and install them. You can also clean up corroded sockets by gently sanding away the corrosion with fine sandpaper. It's possible you may have to replace wiring, which can be purchased as part of a complete kit that includes new lights, connectors, and lenses. We suggest if you do not have LED light on your trailer to switch over to them. Led lights are brighter, more efficient and has multiply bulbs so you will never have a taillight completely unlit if one bulb burns out.   CLR Marine carries trailer lights and lighting kits, which are complete with license plate holder, wiring and side lights. Along with any other trailer accessory you may need.       Specials   Closeouts    Remanufactured    Rebates  

4 LED Marine Cube Light - 3" SPECS Input Voltage: 10-30V DC Wattage: 12W (4-3W CREE LEDs) Raw Lumens: 960 Color Temperature: 6000K Beam Pattern: 90deg Flood CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: White Coating with UV Inhibitors Lens Material: PC Mounting Bracket: Stainless Steel Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40degC to +60degC Current Consumption: .9amps at 13.8 volts IP Rating: IP68 Protections: Reverse Polarity WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Attention Sailers!!! Do you have a Binnacle mounted compass that is looking really bad? Now is the time to update to a New Ritchie DNP-200 Navigator Compass. We have one in stock in our clearance section selling for have the price. Ritchie Navigator Compass Navigator Compass Features: 4-1/2" PowerDamp Flat Card Dial with Large Numerals Brushed Stainless Housing Ideal for both Power and Sail Boats Fits all Popular Sailboat Steering Pedestals Exclusive Built-in Green NiteVu Night Illumination Built-in Compensators to Easily Adjust for Deviation Scientifically Matched Sapphire Jewel and Hardened Steel Pivot Dial Movement Internal Gimbal Systems for Maximum Stability During Adverse Pitch and Roll Conditions Powerful DirectiveForce Magnets for Fast Heading Lock-on Movable Sun Shield 45 Degree Lubber Lines High Temperature Construction for Extended Operating Range Custom Fitted Protective Covers Available (weather shield model no. WS-P) Easily Installed, Fits 5.25" (13.35 cm) Mounting Hole 100% Repairable Exclusive 5-Year Ritchie Warranty   Get it today before it's gone at  https://www.clrmarine.com/m4/10377--ritchie-dnp-200-navigator-compass-binnacle-mount.html

Round LED Driving Light - 3.5" SPECS Input Voltage: 10-30V DC Wattage: 18W (6-3W OSRAM LEDs) Raw Lumens: 1440 Color Temperature: 6000K Beam Pattern: 8º Spot CONSTRUCTION Housing Material: Die-cast Aluminum Housing Housing Color: Black Membrane: Gore™ Lens Material: PC Mounting Bracket: Black Powder Coated Steel Hole Dimensions: Mounting Bolt Drill – .25in Electronics: Integrated-Epoxy Encapsulated Hardware: Stainless 316 OPERATION Operating Temperature: -40º C to +60º C Current Consumption: .9 amps at 13.8 volts IP Rating: IP67 Protections: Reverse Polarity Optional black cover HE-DLC35 available WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.