|
4 LED Cube Light - Flood - 3" - 2 Pack
Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Lumens: 960
Lux @ 10M: 32 Raw
Color Temperature: 6000K
Beam Pattern: 90° Flood
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
169.08 |
|
|
4 LED Cube Light - Flood - 3"
Illuminate the night with the high-power, compact Heise 3 Inch LED Cube Light (E-HCL2). Integrated-epoxy encapsulated electronics, a virtually unbreakable polycarbonate lens and aluminum housing construction makes these cube lights ideal for any application. IP68 rated to withstand the worst environments. These bright cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs. The 90 degree flood beam pattern offers a wider angle of illumination. Colored accent caps are included to customize your light cube housing. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Lumens: 960
Lux @ 10M: 32 Raw
Color Temperature: 6000K
Beam Pattern: 90° Flood
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
66.32 |
|
|
4 LED Cube Light w/Harness - Spot Beam- 3" - 2 Pack
Focus your field of view with the narrow but powerful 8 degree spot beam LED cube light. These 3 Inch 4 LED cube lights provide 960 raw lumens from four 3-watt OSRAM LEDs for plenty of light. Replaceable color accent caps are included to customize the housing. Constructed of die-cast aluminum housing and a virtually unbreakable polycarbonate lens, these cube lights are IP68 rated and can withstand the worst environments. It can get hit, shaken, banged up and wet - without fear of failure.
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W OSRAM LEDs)
Raw Lumens: 960 Each
LUX @ 10M: 380
Color Temperature: 6000K
Beam Pattern: 8° Spot
CONSTRUCTION
Housing Material: Die-Cast Aluminum Housing
Housing Color: Dark Gray
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: 40°C to +60°C
Current Consumption: .7 Amps @ 13.8 Volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
178.51 |
|
|
4 LED Marine Cube Light - 3"
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W CREE LEDs)
Raw Lumens: 960
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: White Coating with UV Inhibitors
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: .9amps at 13.8 volts
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
69.94 |
|
|
6 LED Cube Light - Flood Beam - 3" - 2 Pack
Heise HE-DLWH1 Dual Light Wiring Harness Included
Advanced thermal management- short circuit and open circuit protection and many other innovative features.
Surface mount and flush mount LED cubes give you tons of options for every application you need.
SPECS
Input Voltage: 10-30V DC
Power Consumption: 12W Each
Pair (4-3W CREE LED)
Lumen Flux: 900lm Each
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Hardware: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
183.74 |
|
|
6 LED Cube Light - Flood Beam - 3"
Advanced thermal management- short circuit and open circuit protection and many other innovative features
Surface mount and flush mount LED cubes give you tons of options for every application you need
SPECS
Input Voltage: 10-30V DC
Power Consumption: 18W
(6-3W CREE LED)
Lumen Flux: 1440lm
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Hardware: Stainless Steel
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
63.60 |
|
|
Blackout LED Cube Light - Flush Mount - 3"
SPECS
Input Voltage- 10-30V DC
Wattage- 12W
(4-3W CREE LED)
Raw Lumens- 960
LUX at 10M- 17
Color Temperature- 6000K
Beam Pattern- 90 degree Flood
CONSTRUCTION
Housing Material- Die-cast Aluminum Housing
Housing Color- Black
Lens Material- PC
Mounting Bracket- Flush Mount
Electronics- Integrated-Epoxy Encapsulated
Hardware- Stainless 316 and includes a gasket and cut out template
OPERATION
Operating Temperature- -40 degree C to +60 degree C
Current Consumption- .9 amps @ 13.8 volts
IP Rating- IP68
Protections- Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
80.69 |
|
|
3" 4 LED Cube Light - 2-Pack
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
239.04 |
|
|
3" 4 LED Cube Light
Specifications:
Wattage: 13W
Lumens: 1080
Lux @ 10M: 411
Color Temperature: 6000K
Beam Pattern: Spot (8°)
Construction:
Housing Material: Die-Cast Aluminum Housing
Housing Color: Black
Lens Material: PC
Mounting Bracket: Stainless Steel
Electronics: Integrated–Epoxy Encapsulated
Hardware: Stainless 316
Operation:
Operating Temperature: -40°C to +60°C
Current Consumption @ 13.8V: 0.9 A
IP Rating: IP67
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
67.51 |
|
|
Round LED Driving Light - 3.5"
SPECS
Input Voltage: 10-30V DC
Wattage: 18W (6-3W OSRAM LEDs)
Raw Lumens: 1440
Color Temperature: 6000K
Beam Pattern: 8º Spot
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: Black
Membrane: Gore™
Lens Material: PC
Mounting Bracket: Black Powder Coated Steel
Hole Dimensions: Mounting Bolt Drill – .25in
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316
OPERATION
Operating Temperature: -40º C to +60º C
Current Consumption: .9 amps at 13.8 volts
IP Rating: IP67
Protections: Reverse Polarity
Optional black cover HE-DLC35 available
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
65.92 |
|
|
Safety First when it comes to Trailer Lighting
Safety is important, not only on the water, but on the road going to and coming from the water. If your trailer is more than a few years old, most likely you have had or are having some issues with the lights and the electrical system on your trailer. Fortunately, most issues are pretty easy to fix.
The first thing to do is to test the lights by hooking up to the vehicle harness and checking all lights to make sure they are bright and working. If any are dim or not functioning, connect a tester to the vehicle harness to see if there might be an issue with the electrical source. Cleaning the connectors of the harness on both the vehicle and trailer side is critical, and can easily be done with a can of electrical connector spray and a fine wire brush. Also, clean the ground contact and tighten the ground wire.
Make sure to check the ground screw and replace it if it is corroded. Most bulbs are easily replaceable by simply twisting them to remove and install them. You can also clean up corroded sockets by gently sanding away the corrosion with fine sandpaper. It's possible you may have to replace wiring, which can be purchased as part of a complete kit that includes new lights, connectors, and lenses.
We suggest if you do not have LED light on your trailer to switch over to them. Led lights are brighter, more efficient and has multiply bulbs so you will never have a taillight completely unlit if one bulb burns out.
CLR Marine carries trailer lights and lighting kits, which are complete with license plate holder, wiring and side lights. Along with any other trailer accessory you may need.
Specials Closeouts Remanufactured Rebates
|
|
|
4 LED Marine Cube Light - Flush Mount - 3"
SPECS
Input Voltage: 10-30V DC
Wattage: 12W (4-3W CREE LEDs)
Raw Lumens: 960
Color Temperature: 6000K
Beam Pattern: 90deg Flood
CONSTRUCTION
Housing Material: Die-cast Aluminum Housing
Housing Color: White Coating with UV Inhibitors
Lens Material: PC
Mounting Bracket: Flush Mount
Electronics: Integrated-Epoxy Encapsulated
Hardware: Stainless 316 and includes a gasket and cut out template
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: .9 amps at 13.8 volts per cube
IP Rating: IP68
Protections: Reverse Polarity
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
64.56 |
|
|
Sea Hawk XL Dual Color LED Floodlights - Blue/White LED - White Housing
Professional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.
Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.
The new Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.
Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.
Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Housing Material: Thermally conductive polymer housing
Lens Material: Heavy duty Grilamid lens
Bracket Material: 316 Stainless Steel
Operating Voltage: 9-33V DC
Power Consumption: White LEDs <12W, Red <2W, Blue <4W
Light Output: 750 lumens
Color Temperature: 5000K (White)
Degree of Protection: IP 67 - Completely Sealed
Cable: Pre-wired with 2.5M of tinned marine cable
Approvals: CE
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
174.68 |
|
|
Sea Hawk XL Dual Color LED Floodlights - Blue/White LED - Black Housing
Professional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.
Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.
The new Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.
Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.
Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Housing Material: Thermally conductive polymer housing
Lens Material: Heavy duty Grilamid lens
Bracket Material: 316 Stainless Steel
Operating Voltage: 9-33V DC
Power Consumption: White LEDs <12W, Red <2W, Blue <4W
Light Output: 750 lumens
Color Temperature: 5000K (White)
Degree of Protection: IP 67 - Completely Sealed
Cable: Pre-wired with 2.5M of tinned marine cable
Approvals: CE
|
174.68 |
|
|
Sea Hawk XL Dual Color LED Floodlights - Red/White LED - White Housing
Professional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.
Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.
The Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.
Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.
Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.
Specifications:
Housing Material: Thermally conductive polymer housing
Lens Material: Heavy duty Grilamid lens
Bracket Material: 316 Stainless Steel
Operating Voltage: 9-33V DC
Power Consumption: White LEDs <12W, Red <2W, Blue <4W
Light Output: 750 lumens
Color Temperature: 5000K (White)
Degree of Protection: IP 67 - Completely Sealed
Cable: Pre-wired with 2.5M of tinned marine cable
Approvals: CE
|
174.68 |
|